News and Events
- SBFE research fellow Xiaohui Lin receives the MSCA DOROTHY COFUND award
- Upskill with UCD’s engineering micro-credentials
- Minister O’Donovan announces funding boost for early career researchers
- Recent Lab visit by UCD Engineering & Architecture to Sheffield University Diamond Centre
- UCD Stormwater Runoff Research featured in Nicola Haines Team
- Madeleine Lowery among UCD Researchers recognised in SFI Frontiers for the Future Awards
- UCD’s LaNua Medical Wins Big Ideas Award at Enterprise Ireland’s Start-Up Day 2024
- Robotics Competition
- Congratulations to All the Winners of this years NovaUCD Awards
- Irish National Doctoral Research Cohort on Floating Offshore Wind Dynamic Cables is formed
- UCD and Northeastern University extend and deepen long-standing partnership with five collaborative research projects
- EPA announces €14.3M in new research funding
- Arup Scholarship Awards 2024
- UCD names new Vice-President for Equality, Diversity and Inclusion
- Project promoting safe staffing in the healthcare system wins UCD Research Impact Competition
- VOICE Project Launches to Shape Tomorrow's Sustainability
- Archives
- 2023 News Archive
- 2022 News Archive
- 2021 News Archive
- 2020 News Archive
- 2019 News Archive
- 2018 News Archive
- Irish researchers win first prize in global 3D printing competition
- Professor Da-Wen Sun Conferred with Certificate of Foreign Member of Polish Academy of Sciences
- Professor David FitzPatrick named as President of Ireland’s first Technological University
- Inspiring wind energy and wilderness projects win 2018 Sustainability and Energy LaunchPad Awards
- UCD Professor made fellow of the Institute of Mathematics and its Applications (IMA)
- Maxim Donates Unique Robotic Learning Factory to University College Dublin
- UCD named partner in major new EU manufacturing consortium
- Irish architects awarded UCD’s highest honour
- BDIC chosen as higher education partnership of the year
- Environmental Policy academics launch report on the Failure of Water Charges in Ireland
- Professor Da-Wen Sun Named Highly Cited Researcher by Clarivate in the 4th Consecutive Year
- O'Donnell and Tuomey are shortlisted for this year's RIBA international prize
- Science Foundation Ireland 2018 Science Awards recognise key leaders in the Irish Research Community
- 2018 UCD Alumni Award Winner in Engineering & Architecture
- Intel awards bursaries and employee mentors to 16 UCD graduate students
- The ESB Inter-Colleges Challenge
- Children encouraged to delve into STEM as Science Apprentice series returns
- Dr Nicky Bertollo wins the 2018 UCD Allergan Innovation award for novel medical device design
- Inclusion Panel at the Grace Hopper Conference in Houston
- Shire Announces UCD Scholarship for Masters in Biopharmaceutical Engineering
- Minister launches €22 million SFI research centre focused on advanced manufacturing
- Countdown to lift-off for UCD scientists making Ireland’s first satellite
- Biochemical Engineering alumnus set to chair new HSE oversight Board
- Arklow through the eyes of strangers
- Optics in Ireland, August 2018
- UCD Engineers Tech start-up CALT Dynamics selected for TechStars US accelerator
- A UK charity has created a way to play Minecraft using just your eyes
- Professor Da-Wen Sun Elected Academician of International Academy of Refrigeration
- Jane Rendell, Despina Stratigakos & Ruth Morrow in conversation
- UCD Master of Architecture achieves Substantial Equivalency from the NAAB
- Finalists shortlisted for UCD Future Campus architectural design competition
- €1.4 million in SFI funding awarded to UCD academics
- University College Dublin Wins 2018 Knowledge Transfer Ireland Impact Award
- Professor Da-Wen Sun Presented with iAABE Founding President Gavel and iAABE Fellow Certificate
- Tom Brazil 1952-2018
- Engineering Mobility Design competition
- Collaboration between Prof Federico Milano and artist Julie Merriman
- Professor Da-Wen Sun Conferred with Honorary Doctorate Degree from Peru
- UCD professor joins ranks of US National Academy of Engineering
- Intel bursaries and employee mentors for UCD graduate students
- Top Irish jockeys back UCD engineers use of race footage to crack future helmet design
- 2017 News Archive
- 2016 News Archive
- Building the State
- A Centenary Celebration
Irish researchers win first prize in global 3D printing competition
Wednesday, 14 November, 2018
Dr Sarah Brady, I-Form researcher, accepting the USD10,000 prize from Charles Han, CEO, INTAMSYS, at the Formnext additive manufacturing conference in Frankfurt
- I-Form researchers win top prize in international 3D printing competition
- USD10k prize for UCD-based research project exploring 3D print applications for the pharma industry
- Prize presented at Formnext conference in Frankfurt
(Dublin, 14th November) A team of Irish researchers has won first prize in a global competition for industrial 3D printing. The team – comprising UCD-based researchers in I-Form, the SFI Research Centre for Advanced Manufacturing – scooped a prize worth USD10,000 for their project: the design and print of a disposable 3D printed reactor. The polymer reactor can be used to controllably mix chemical precursors used in the manufacture of pharmaceutical agents.
The competition was run by INTAMSYS, a manufacturer of industrial 3D printing systems with its headquarters in Shanghai, and was open to entries from around the globe. The Irish team secured a prize worth USD10,000 – consisting of USD2,000, an INTAMSYS 3D printer, and several kilos of printing filaments for use with the equipment. The prize was presented to Dr Sarah Brady from the Irish team at the Formnext additive manufacturing conference in Frankfurt this week.
The competition challenged participants to showcase examples of 3D printing (also known as additive manufacturing) in jigs and fixtures, with the aim of achieving cost and lead-time savings in manufacturing.
The winning entry being 3D printed
The winning entry was a cross-disciplinary collaboration from an engineering team based at University College Dublin: the reactor was 3D printed by I-Form’s Dr Sarah Brady, under the supervision of I-Form centre director Prof. Denis Dowling. The reactor was designed by Dr Matthew Harding and Dr Steven Ferguson in UCD Chemical and Bioprocess Engineering, who are evaluating it for use in the intensified chemical synthesis of drugs. I-Form is an SFI Research Centre whose mission is to shape the future of manufacturing through high-impact research into the application of digital technologies to materials processing.
“I’m delighted to see the creativity and expertise of Irish researchers working in advanced manufacturing being recognised in this international competition,” said Prof. Dowling, I-Form’s Centre Director. “Additive manufacturing (3D printing) opens up a world of possibilities for industrial processes. At I-Form we work closely with industry to advance the low-cost, low-risk design of new products and the manufacture of high-value components with enhanced material performance, alongside the reduction of processing times and enhancing process reliability.”
The INTAMSYS award was for the design and print of a disposable 3D printed reactor for carrying out chemical reactions: As the materials move through the reactor, they mix and react to form the pharmaceutical intermediates or product. The part is known as a continuous flow reactor. This type of reactor is now becoming common within the pharmaceutical manufacturing sector, as they allow product to be produced continually, under more aggressive conditions, with better control over heating, cooling and improved mixing, enabling much faster reactions to be conducted. This can enable dramatic reduction in facility size and cost, with equivalent production rates.
One advantage of using 3D printing for the fabrication of flow reactors is design flexibility. In this example, the mixing chamber inside the reactor can be designed specifically to match the characteristics of a given reaction mixture, allowing the optimum reactor to be printed on-demand, at a fraction of the cost of traditional fabrication techniques.
The continuous flow reactor was printed using an Intamsys Funmat HT using PEEK material.
About I-Form
I-Form, the SFI Research Centre for Advanced Manufacturing, is delivering the next level of understanding and control for complex manufacturing processes. Our mission is to shape the future of manufacturing through high-impact research into the application of digital technologies to materials processing. I-Form brings together a nationwide pool of expertise in materials science, engineering, data analytics and cognitive computing. I-Form is applying exciting developments in digital technologies to materials processing, to improve understanding, modelling and control, thus increasing the competitiveness of Irish manufacturing on the world stage.
Funded by Science Foundation Ireland, I-Form works with industry to advance the low-cost, low-risk design of new products and the manufacture of high-value components exhibiting enhanced material performance, while reducing processing times and achieving enhanced process reliability. I-Form is actively engaged across a range of different materials processing technologies, with a particular focus on Additive Manufacturing (3D printing).
I-Form is funded through the Science Foundation Ireland Research Centres Programme and co-funded under the European Regional Development Fund. It is a partnership between University College Dublin, Dublin City University, Trinity College Dublin, Institute of Technology Sligo, the National University of Ireland Galway, Waterford Institute of Technology and the National University of Ireland Maynooth - along with strong collaborative industry engagement in sectors that include medical devices, aerospace, automobile and microelectronic components. See http://www.i-form.ie/ for more information.
About INTAMSYS
INTAMSYS (abbreviation of INTelligent Additive Manufacturing SYStems) is a fast-growing industrial 3D printer manufacturer and additive manufacturing solutions provider.
The smarter and easier to use INTAMSYS 3D printer offers a high performance multiple functional materials all-in-one solution. Using high performance functional materials like PEEK, PEKK, ULTEM, PPSU, etc. and other engineering materials like PC, PA, PA-CF, ABS, etc. our 3D printers are ideal for low volume continuous production and provide a reliable solution for applications in diverse industries (aerospace, automotive, jigs & fixtures, medical sector, research, etc.).
Headquartered in Shanghai, INTAMSYS operates a number of manufacturing and research facilities and is committed to the highest manufacturing design and quality standards.