Below is the list of research publications for the School of Mechanical and Materials Engineering in the academic year 2021/2022.
| Dr Mert Celikin | |
Naab, B., Dowling, D. P., & Celikin, M. (2022). The Study on Microstructural Evolution During Post-processing of Additively Manufactured Ti64. In Unknown Book (pp. 198-207). doi:10.1007/978-3-030-92381-5_18 |
|
| Professor Fengzhou Fang | |
| Xu, F., & Fang, F. (2021). Micro- and Nano-Manufacturing. In Y. Huang, W. Lihui, & S. Y. Liang (Eds.), Handbook of Manufacturing. Singapore: World Scientific. doi:10.1142/9789813271029_0008 |
|
| Dr Pezhman Ghadimi | |
| Ghadimi, P., Gilchrist, M. D., & Xu, M. (2022). Role of Circular Resources and the Importance of Developing Circular Models in Product Design, Manufacturing and Supply Chains. In Sustainable Production, Life Cycle Engineering and Management (pp. 1-5). doi:10.1007/978-3-030-90217-9_1 |
|
| Kelly, R., Ghadimi, P., & Wang, C. (2022). Barriers to Closed-Loop Supply Chains Implementation in Irish Medical Device Manufacturers: Bayesian Best–Worst Method Analysis. In Sustainable Production, Life Cycle Engineering and Management (pp. 43-61). doi:10.1007/978-3-030-90217-9_5 |
|
| Professor Michael Gilchrist | |
| Ghadimi, P., Gilchrist, M. D., & Xu, M. (2022). Role of Circular Resources and the Importance of Developing Circular Models in Product Design, Manufacturing and Supply Chains. In Sustainable Production, Life Cycle Engineering and Management (pp. 1-5). doi:10.1007/978-3-030-90217-9_1 |
|
| Assoc Professor Nikolaos Papakostas | |
| Papakostas, N., & Ramasubramanian, A. K. (2021). Digital technologies as a solution to complexity caused by mass personalization. In Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology (pp. 153-180). doi:10.1016/B978-0-12-823657-4.00009-9 |
|
| Dr Nan Zhang | |
| Zhang, N., Guan, T., & Zhang, H. (2022). Polymer Micro Fabrication. In Encyclopedia of Materials: Plastics and Polymers (pp. 548-564). Elsevier. doi:10.1016/b978-0-12-820352-1.00080-8 |
|
| Zhang, H., & Zhang, N. (2022). Polymer Micro Injection Molding. In Encyclopedia of Materials: Plastics and Polymers (pp. 565-574). Elsevier. doi:10.1016/b978-0-12-820352-1.00081-x |
|
| Professor David Browne | |
| Oisin, G., Andrew, M., Mert, C., & Browne, D. (2021). An experimental study of the effects of deviations from AlCoCrFeNi alloy composition and heat treatment on the microstructure, phase stability and properties of cast High Entropy Alloys. In 2nd World Congress on High Entropy Alloys (HEA 2021). Charlotte, North Carolina, USA. | |
| Dreelan, D., Parivendhan, G., Cardiff, P., Ivankovic, A., & Browne, D. (2022). Numerical modeling of powder spreading, meltpool dynamics, and grain structure evolution during additive manufacturing. In TMS Annual Meeting & Exhibition. Anaheim, CA, USA. | |
| Murphy, A., Norman, A., Meagher, P., Worsley, T., & Browne, D. (2022). Bulk Metallic Glasses for space mechanism applications: an experimental investigation. In 1st ESA/NASA International Conference on Advanced Manufacturing for Air, Space and Land Transportation. online conference. | |
| Mullen, J., Celikin, M., Cunningham, P., & Browne, D. (2022). Research acceleration via Machine Learning for characterization of growing dendritic crystals from in situ X-ray videos of alloy solidification. In First World Congress on Artificial Intelligence in Materials and Manufacturing (AIM 2022). Pittsburgh, Pennsylvania, USA: TMS. | |
| Al Azad, A., Cardiff, P., & Browne, D. (2022). A Phase-Field study of microstructure evolution during rapid solidification of additively manufactured metallic alloys. In 6th International Conference on Advances in Solidification Processes (ICASP-6). Le Bischenberg, France. | |
| Dreelan, D., Ivankovic, A., & Browne, D. (2022). Multi-layer grain structure predictions for metallic Additive Manufacturing processes. In 6th International Conference on Advances in Solidification Processes (ICASP-6). Le Bischenberg, France: IoP. | |
| Al Azad, A. R., Cardiff, P., & Browne, D. (2022). Simulation of dendritic growth in a binary alloy using the phase-field method implemented in OpenFoam. In 17th OpenFOAM Workshop (OFW17). Cambridge, UK. | |
| Assoc Professor Philip Cardiff | |
| Tandis, E., Clancy, M., & Cardiff, P. (2021). Combining machine learning and the finite volume method to solve problems in linear elasticity. In Mechanistic Machine Learning and Digital Twins for Computational Science, Engineering & Technology. | |
| Dreelan, D., Parivendhan, G., Cardiff, P., Ivankovic, A., & Browne, D. (2022). Numerical modeling of powder spreading, meltpool dynamics, and grain structure evolution during additive manufacturing. In TMS Annual Meeting & Exhibition. Anaheim, CA, USA. | |
| Al Azad, A., Cardiff, P., & Browne, D. (2022). A Phase-Field study of microstructure evolution during rapid solidification of additively manufactured metallic alloys. In 6th International Conference on Advances in Solidification Processes (ICASP-6). Le Bischenberg, France. | |
| Al Azad, A. R., Cardiff, P., & Browne, D. (2022). Simulation of dendritic growth in a binary alloy using the phase-field method implemented in OpenFoam. In 17th OpenFOAM Workshop (OFW17). Cambridge, UK. | |
| Dr Mert Celikin | |
| Schott, F., McKeown, D., Jin, L., & Celikin, M. (2022). Development of Magnesium–Lithium-Based Alloys for Space Applications: The Relationship Between Precipitation Hardening and Damping Capacity. In Minerals, Metals and Materials Series (pp. 77-81). doi:10.1007/978-3-030-92533-8_13 |
|
| Mullen, J., Celikin, M., Cunningham, P., & Browne, D. (2022). Research acceleration via Machine Learning for characterization of growing dendritic crystals from in situ X-ray videos of alloy solidification. In First World Congress on Artificial Intelligence in Materials and Manufacturing (AIM 2022). Pittsburgh, Pennsylvania, USA: TMS. | |
| Professor Fengzhou Fang | |
| Zhang, H., Zhang, N., & Fang, F. (2021). Fabrication of 2D materials enhanced nickel mould using electroforming. In Proceedings of the 7th International Conference on Nanomanufacturing. Xian, China. | |
| You, K., Liu, G., & Fang, F. (2022). Investigation of surface integrity on laser pre-heat assisted diamond turning of binderless tungsten carbide. In Procedia CIRP Vol. 108 (pp. 566-570). doi:10.1016/j.procir.2022.03.089 |
|
| Lyu, P., Liu, Z., Lai, M., & Fang, F. (2022). Study on Ultra-smooth Finishing of Lutetium Oxide Single Crystal Using Plasma-assisted Polishing. In Smart Innovation, Systems and Technologies Vol. 296 SIST (pp. 103-108). doi:10.1007/978-981-19-1918-3_12 |
|
| You, K., Niu, Y., Zuo, J., Jiang, J., & Fang, F. (2022). A Modification Method of Nano-constitutive Model Based on Indentation Experiment. In Smart Innovation, Systems and Technologies Vol. 296 SIST (pp. 159-164). doi:10.1007/978-981-19-1918-3_18 |
|
| Liu, Z., Lyu, P., Lai, M., & Fang, F. (2022). Study on Superfinishing of Single Crystal Lutetium Oxide by Cerium Oxide Slurry. In Smart Innovation, Systems and Technologies Vol. 296 SIST (pp. 85-93). doi:10.1007/978-981-19-1918-3_10 |
|
| Professor Lizbeth Goodman | |
| Murphy, E., & Goodman, L. (2022). Unintended Consequences when the Engineering Design Team is Noninclusive: An Exploration of the Literature. In 2022 IEEE Global Engineering Education Conference (EDUCON). IEEE. doi:10.1109/educon52537.2022.9766789 |
|
| Dr David McKeown | |
| Dunwoody, R., Doyle, M., Murphy, D., Finneran, G., O'Callaghan, D., Reilly, J., et al. (2022). Validation of the operations manual for EIRSAT-1, a 2U CubeSat with a novel gamma-ray burst detector. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12186. doi:10.1117/12.2631695 |
|
| Schott, F., McKeown, D., Jin, L., & Celikin, M. (2022). Development of Magnesium–Lithium-Based Alloys for Space Applications: The Relationship Between Precipitation Hardening and Damping Capacity. In Minerals, Metals and Materials Series (pp. 77-81). doi:10.1007/978-3-030-92533-8_13 |
|
| Doyle, M., Gloster, A., Griffin, M., Hibbett, M., Kyle, J., O'Toole, C., et al. (2022). Design, development, and testing of flight software for EIRSAT-1: A university-class CubeSat enabling astronomical research. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12189. doi:10.1117/12.2627464 |
|
| Mangan, J., Murphy, D., Dunwoody, R., Doyle, M., Ulyanov, A., Hibbett, M., et al. (2022). Performance analysis of embedded firmware for the detection of gamma-ray bursts on a 2U CubeSat. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12181. doi:10.1117/12.2627064 |
|
| Mangan, J., Murphy, D., Dunwoody, R., Doyle, M., Ulyanov, A., Hibbett, M., et al. (2022). Experiences in firmware development for a CubeSat instrument payload. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.024 |
|
| Abadzhieva, S., Oleiro Carreiro, I., Mcleod, R., & Pérez, R. (2022). University of Nottingham Student space activities to enrich the traditional curriculum. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.113 |
|
| Thompson, J., Murphy, D., Reilly, J., Salmon, L., Dunwoody, R., Doyle, M., et al. (2022). Thermal characterization testing of a robust and reliable thermal knife HDRM (Hold Down and Release Mechanism) for CubeSat deployables. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.079 |
|
| Doyle, M., Murphy, D., Reilly, J., Thompson, J., Walsh, S., Akarapu, S. K. R., et al. (2022). Update on the status of the Educational Irish Research Satellite (EIRSAT-1). In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.052 |
|
| Reilly, J., Murphy, D., Doyle, M., Walsh, S., Akarapu, S. K., De Faoite, D., et al. (2022). EIRFLAT-1: A FlatSat platform for the development and testing of the 2U CubeSat EIRSAT-1. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.028 |
|
| McKeown, D., Jalba, C., Milev, P., Schulz, P., Pflug, A., Ramm, P., et al. (2022). DEAR project: Lunar dust surface interactions, risk and removal investigations. In http://hdl.handle.net/2117/368714. Universitat Politècnica de Catalunya, Barcelona: Universitat Politècnica de Catalunya. Retrieved from http://hdl.handle.net/2117/368714 | |
| Dr Neal Murphy | |
| Murphy, N. (2021). The Mode I & Mode II Fracture Behaviour of CFRPs Interleaved with Thermoplastic Veils. In 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites & Adhesives. | |
| Dr Kevin Nolan | |
| Irving, H., & Nolan, K. (2022). CFD Analysis and Adjoint Optimisation of Laparoscopic Trocar Geometries. In 17th OpenFOAM Workshop. | |
| Assoc Professor Eoin O'Cearbhaill | |
| Brandhorst, D., Brandhorst, H., Domingo-Lopez, D. A., O'Cearbhaill, E., McDonough, L., Coulter, F. B., et al. (2022). Comparison of different hyaluronic acid-based matrices to maintain human islet survival in macroencapsulation devices. In DIABETOLOGIA Vol. 65 (pp. S198-S199). | |
| Domingo-Lopez, D. A., Brandhorst, D., O'Cearbhaill, E., Coulter, F., McDonough, L., Brandhorst, H., et al. (2022). A highly oxygenated hydrogel enhanced the survival of human islets encapsulated within macroencapsulation devices. In DIABETOLOGIA Vol. 65 (pp. S92). | |
| Assoc Professor James O'Donnell | |
| Shamsi, M. H., Ali, U., Mangina, E., & O'Donnell, J. (2021). Assessing the effect of network order on epistemic uncertainty quantification for reduced-order grey-box energy models. In Building Simulation Conference Proceedings. KU Leuven. doi:10.26868/25222708.2021.30178 |
|
| Ali, U., Shamsi, M. H., Bohacek, M., Purcell, K., Hoare, C., & O'Donnell, J. (2021). GIS-based multi-scale residential building energy modeling using a data-driven approach. In Building Simulation Conference Proceedings. KU Leuven. doi:10.26868/25222708.2021.30177 |
|
| Shaw, C., de Andrade Pereira, F., Hoare, C., Hammar, K., McNally, C., & O'Donnell, J. (2021). Digital Interoperability for the Facilities Management Domain: a Review of Semantic Web-based Approaches. In https://itc.scix.net/paper/w78-2021-paper-096. Luxembourg: CIB W-78. | |
| De Andrade Pereira, F., Shaw, C., Martín-Toral, S., L. Hernández, J., Sanz Jimeno, R., Finn, D., & O'Donnell, J. (2022). Towards semantic interoperability for demand-side management: a review of BIM and BAS ontologies. In Proceedings of the 2022 European Conference on Computing in Construction. University of Turin. doi:10.35490/ec3.2022.154 |
|
| Assoc Professor Vikram Pakrashi | |
| Gonzalez Sopena, J. M., Pakrashi, V., & Ghosh, B. (2021). Interval prediction for short-term traffic forecasting using hybrid mode decomposition models. In IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC Vol. 2021-September (pp. 3246-3251). doi:10.1109/ITSC48978.2021.9564878 |
|
| Micu, E. A., Khan, M. A., Bhowmik, B., Florez, M. C., Obrien, E., Bowe, C., & Pakrashi, V. (2022). Scour Repair of Bridges Through Vibration Monitoring and Related Challenges. In Lecture Notes in Civil Engineering Vol. 200 LNCE (pp. 499-508). doi:10.1007/978-3-030-91877-4_57 |
|
| Micu, E. A., Obrien, E., Bowe, C., Okosun, F. O., Morgan, D., & Pakrashi, V. (2022). Instrumenting an Operational Train for Continuous Monitoring of Bridges and Track. In Lecture Notes in Civil Engineering Vol. 200 LNCE (pp. 1190-1196). doi:10.1007/978-3-030-91877-4_135 |
|
| González-Sopeña, J. M., Pakrashi, V., & Ghosh, B. (2022). Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting. In Materials Research Proceedings Vol. 20 (pp. 58-65). doi:10.21741/9781644901731-8 |
|
| González Sopeña, J. M., Maury, C., Pakrashi, V., & Ghosh, B. (2022). Turbine-level clustering for improved short-term wind power forecasting. In Journal of Physics: Conference Series Vol. 2265. doi:10.1088/1742-6596/2265/2/022052 |
|
| Assoc Professor Nikolaos Papakostas | |
| Ramasubramanian, A. K., Mathew, R., Preet, I., & Papakostas, N. (2022). Review and application of Edge AI solutions for mobile collaborative robotic platforms. In Procedia CIRP Vol. 107 (pp. 1083-1088). doi:10.1016/j.procir.2022.05.112 |
|
| Dr Gurminder Singh | |
| Singh, G., & Singla, A. (2022). Comparison of PPC and LQR Controller for Stabilization of Cart Pendulum System: Simulation and Real-Time Study. In Lecture Notes in Mechanical Engineering (pp. 1383-1392). doi:10.1007/978-981-16-0550-5_131 |
|
| Mr Emad Tandis | |
| Tandis, E., Clancy, M., & Cardiff, P. (2021). Combining machine learning and the finite volume method to solve problems in linear elasticity. In Mechanistic Machine Learning and Digital Twins for Computational Science, Engineering & Technology. | |
| Dr Giovanni Tardioli | |
| Tardioli, G., Filho, R., Bernaud, P., & Ntimos, D. (2022). An Innovative Modelling Approach Based on Building Physics and Machine Learning for the Prediction of Indoor Thermal Comfort in an Office Building. In The 9th Annual Edition of Sustainable Places (SP 2021). MDPI. doi:10.3390/environsciproc2021011025 |
|
| Mr Joseph Thompson | |
| Doyle, M., Gloster, A., Griffin, M., Hibbett, M., Kyle, J., O'Toole, C., et al. (2022). Design, development, and testing of flight software for EIRSAT-1: A university-class CubeSat enabling astronomical research. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12189. doi:10.1117/12.2627464 |
|
| Mangan, J., Murphy, D., Dunwoody, R., Doyle, M., Ulyanov, A., Hibbett, M., et al. (2022). Performance analysis of embedded firmware for the detection of gamma-ray bursts on a 2U CubeSat. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12181. doi:10.1117/12.2627064 |
|
| Dunwoody, R., Doyle, M., Murphy, D., Finneran, G., O'Callaghan, D., Reilly, J., et al. (2022). Validation of the operations manual for EIRSAT-1, a 2U CubeSat with a novel gamma-ray burst detector. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 12186. doi:10.1117/12.2631695 |
|
| Mangan, J., Murphy, D., Dunwoody, R., Doyle, M., Ulyanov, A., Hibbett, M., et al. (2022). Experiences in firmware development for a CubeSat instrument payload. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.024 |
|
| Doyle, M., Murphy, D., Reilly, J., Thompson, J., Walsh, S., Akarapu, S. K. R., et al. (2022). Update on the status of the Educational Irish Research Satellite (EIRSAT-1). In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.052 |
|
| Abadzhieva, S., Oleiro Carreiro, I., Mcleod, R., & Pérez, R. (2022). University of Nottingham Student space activities to enrich the traditional curriculum. In 4th Symposium on Space Educational Activities. Universitat Politècnica de Catalunya. doi:10.5821/conference-9788419184405.113 |
|
| Dr Anton van Beek | |
| Ghumman, U. F., van Beek, A., Munshi, J., Chien, T., Balasubramanian, G., & Chen, W. (2021). SDF-Based Inverse Process Design of Solar Cells Using Molecular Dynamics Simulations. In Volume 3B: 47th Design Automation Conference (DAC). American Society of Mechanical Engineers. doi:10.1115/detc2021-71595 |
|
| Dr Nan Zhang | |
| Zhang, H., Zhang, N., & Fang, F. (2021). Fabrication of 2D materials enhanced nickel mould using electroforming. In Proceedings of the 7th International Conference on Nanomanufacturing. Xian, China. | |
| Mousavizadeh, S. M., Zhang, N., & Gilchrist, M. (2022). The effect of NaOH anodization on surface properties of a bioresorbable WE43 alloy. In Proceedings of the 8th international Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing. Dublin, Ireland. | |
| Zaki, S., Szmurlo, J., Zhang, N., & Gilchrist, M. (2022). Shaping of Micro Mould Tools Manufactured by UV LIGA and Selective Laser Melting (SLM). In Proceedings of the 8th international Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing. Online. | |
| Dr Pezhman Ghadimi | |
| Ghadimi, P., Gilchrist, M. D., & Xu, M. (Eds.) (2022). Role of Circular Economy in Resource Sustainability. Springer International Publishing. doi:10.1007/978-3-030-90217-9 |
|
| Dr Usman Ali | |
| Ali, U., Shamsi, M. H., Hoare, C., Mangina, E., & O'Donnell, J. (2021). Review of urban building energy modeling (UBEM) approaches, methods and tools using qualitative and quantitative analysis. Energy and Buildings, 246. doi:10.1016/j.enbuild.2021.111073 |
|
| Shamsi, M. H., Ali, U., Mangina, E., & O'Donnell, J. (2021). Feature assessment frameworks to evaluate reduced-order grey-box building energy models. Applied Energy, 298. doi:10.1016/j.apenergy.2021.117174 |
|
| Mr Barry Brophy | |
| Brophy, B., McCormack, E., Smith, W., & Timoney, D. (2021). Interactive, bottom-up model to audit the true per-person energy consumption (direct and embedded) of Irish citizens per annum. Energy Reports, 7, 1025-1045. doi:10.1016/j.egyr.2020.05.012 |
|
| Professor David Browne | |
| Mota, R. M. O., Lund, E. T., Sohn, S., Browne, D. J., Hofmann, D. C., Curtarolo, S., et al. (2021). Enhancing ductility in bulk metallic glasses by straining during cooling. Communications Materials, 2(1). doi:10.1038/s43246-021-00127-0 |
|
| Ngomesse, F., Reinhart, G., Soltani, H., Zimmermann, G., Browne, D. J., Sillekens, W., & Nguyen-Thi, H. (2021). In situ investigation of the Columnar-to-Equiaxed Transition during directional solidification of Al–20 wt.%Cu alloys on Earth and in microgravity. Acta Materialia, 221. doi:10.1016/j.actamat.2021.117401 |
|
| Mooney, R. P., Sturz, L., Zimmermann, G., Mangelinck-Noël, N., Nguyen-Thi, H., Li, Y., et al. (2022). Concurrent model for sharp and progressive columnar to equiaxed transitions validated by directional solidification experiments processed in microgravity conditions. Computational Materials Science, 210. doi:10.1016/j.commatsci.2022.111436 |
|
| Assoc Professor Philip Cardiff | |
| Bernardo, P., Mac Réamoinn, R., Young, P., Brennan, D., Cardiff, P., & Keenahan, J. (2021). Investigation of the helicopter downwash effect on pedestrian comfort using CFD. Infrastructure Asset Management, 8(3), 133-140. doi:10.1680/jinam.19.00060 |
|
| Rodrigues, P. V., Ramoa, B., Machado, A. V., Cardiff, P., & Nóbrega, J. M. (2021). Assessing the compressive and impact behavior of plastic safety toe caps through computational modelling. Polymers, 13(24). doi:10.3390/polym13244332 |
|
| Zhang, Y., Cardiff, P., Cahill, F., & Keenahan, J. (2022). Assessing the Capability of Computational Fluid Dynamics Models in Replicating Wind Tunnel Test Results for the Rose Fitzgerald Kennedy Bridge. CivilEng, 2(4), 1065-1090. doi:10.3390/civileng2040057 |
|
| Batistic, I., Cardiff, P., & Tukovic, Ž. (2022). A finite volume penalty based segment-to-segment method for frictional contact problems. Applied Mathematical Modelling, 101, 673-693. doi:10.1016/j.apm.2021.09.009 |
|
| Demirdžic, I., & Cardiff, P. (2022). Symmetry plane boundary conditions for cell-centered finite-volume continuum mechanics. Numerical Heat Transfer, Part B: Fundamentals. doi:10.1080/10407790.2022.2105073 |
|
| Wu, K., Tukovic, Ž., Cardiff, P., & Ivankovic, A. (2022). HIERARCHICAL RVE-BASED MULTISCALE MODELING OF NONLINEAR HETEROGENEOUS MATERIALS USING THE FINITE VOLUME METHOD. International Journal for Multiscale Computational Engineering, 20(2), 83-103. doi:10.1615/IntJMultCompEng.2022040214 |
|
| Flint, T. F., Parivendhan, G., Ivankovic, A., Smith, M. C., & Cardiff, P. (2022). beamWeldFoam: Numerical simulation of high energy density fusion and vapourisation-inducing processes. SoftwareX, 18. doi:10.1016/j.softx.2022.101065 |
|
| Huang, L., Li, Y., Benites-Munoz, D., Windt, C. W., Feichtner, A., Tavakoli, S., et al. (2022). A Review on the Modelling of Wave-Structure Interactions Based on OpenFOAM. OpenFOAM® Journal, 2, 116-142. doi:10.51560/ofj.v2.65 |
|
| Dr Mert Celikin | |
| Li, J., Wu, J., Jin, L., Celikin, M., Wang, F., Dong, S., & Dong, J. (2021). The role of dislocation-solute interactions on the creep behaviour of binary Mg–RE alloys. Scientific Reports, 11(1). doi:10.1038/s41598-021-82517-5 |
|
| Guo, Y., Quan, G., Celikin, M., Ren, L., Zhan, Y., Fan, L., & Pan, H. (2022). Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing. Journal of Magnesium and Alloys, 10(7), 1930-1940. doi:10.1016/j.jma.2021.04.006 |
|
| Dr Mattia De Rosa | |
| Pallonetto, F., De Rosa, M., & Finn, D. P. (2022). Environmental and economic benefits of building retrofit measures for the residential sector by utilizing sensor data and advanced calibrated models. Advances in Building Energy Research, 16(1), 89-117. doi:10.1080/17512549.2020.1801504 |
|
| Professor Denis Dowling | |
| Harding, M. J., Feng, B., Lopez-Rodriguez, R., O'Connor, H., Dowling, D., Gibson, G., et al. (2021). Concentric annular liquid-liquid phase separation for flow chemistry and continuous processing. Reaction Chemistry and Engineering, 6(9), 1635-1643. doi:10.1039/d1re00119a |
|
| McCann, R., Obeidi, M. A., Hughes, C., McCarthy, É., Egan, D. S., Vijayaraghavan, R. K., et al. (2021). In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: A review. Additive Manufacturing, 45. doi:10.1016/j.addma.2021.102058 |
|
| Bonomo, M., Ekoi, E. J., Marrani, A. G., Segura Zarate, A. Y., Dowling, D. P., Barolo, C., & Dini, D. (2021). NiO/ZrO<inf>2</inf>nanocomposites as photocathodes of tandem DSCs with higher photoconversion efficiency with respect to parent single-photoelectrode p-DSCs. Sustainable Energy and Fuels, 5(18), 4736-4748. doi:10.1039/d1se00566a |
|
| Sagbas, B., Gümüs, B. E., Kahraman, Y., & Dowling, D. P. (2021). Impact of print bed build location on the dimensional accuracy and surface quality of parts printed by multi jet fusion. Journal of Manufacturing Processes, 70, 290-299. doi:10.1016/j.jmapro.2021.08.036 |
|
| Professor Fengzhou Fang | |
| Zhang, Y., Fang, F., Huang, W., & Fan, W. (2021). Dwell Time Algorithm Based on Bounded Constrained Least Squares Under Dynamic Performance Constraints of Machine Tool in Deterministic Optical Finishing. International Journal of Precision Engineering and Manufacturing - Green Technology, 8(5), 1415-1427. doi:10.1007/s40684-020-00306-3 |
|
| You, K., Fang, F., & Yan, G. (2021). Surface generation of tungsten carbide in laser-assisted diamond turning. International Journal of Machine Tools and Manufacture, 168. doi:10.1016/j.ijmachtools.2021.103770 |
|
| Zhang, H. Y., Zhang, N., Han, W., Zhang, H. G., Gilchrist, M. D., & Fang, F. Z. (2021). Characterization of process and machine dynamics on the precision replication of microlens arrays using microinjection moulding. Advances in Manufacturing, 9(3), 319-341. doi:10.1007/s40436-020-00341-y |
|
| Han, W., & Fang, F. (2021). Orientation effect of electropolishing characteristics of 316L stainless steel fabricated by laser powder bed fusion. Frontiers of Mechanical Engineering, 16(3), 580-592. doi:10.1007/s11465-021-0633-7 |
|
| Fan, Y., Song, Y., Xu, Z., Dong, B., Wu, J., Rommel, M., et al. (2021). Molecular dynamics simulation of color centers in silicon carbide by helium and dual ion implantation and subsequent annealing. Ceramics International, 47(17), 24534-24544. doi:10.1016/j.ceramint.2021.05.172 |
|
| Shen, G., Zhang, J., Kang, C., & Fang, F. (2021). Study on surface texture patterns for improving tribological performance of bioimplants. Surface and Coatings Technology, 422. doi:10.1016/j.surfcoat.2021.127567 |
|
| Kang, C., Liang, F., Shen, G., Wu, D., & Fang, F. (2021). Study of micro-dimples fabricated on alumina-based ceramics using micro-abrasive jet machining. Journal of Materials Processing Technology, 297. doi:10.1016/j.jmatprotec.2021.117181 |
|
| Zhang, H., Guan, T., Zhang, N., & Fang, F. (2021). Fabrication of permanent self-lubricating 2D material-reinforced nickel mould tools using electroforming. International Journal of Machine Tools and Manufacture, 170. doi:10.1016/j.ijmachtools.2021.103802 |
|
| Zhang, H., Zhang, N., & Fang, F. (2021). Study of ion transportation and electrodeposition under hybrid agitation for electroforming of variable aspect ratios micro structures. Precision Engineering, 72, 122-143. doi:10.1016/j.precisioneng.2021.04.008 |
|
| Zhang, H., Zhang, N., & Fang, F. (2021). Study on Controllable Thickness and Flatness of Wafer-Scale Nickel Shim in Precision Electroforming Process: Simulation and Validation. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(11). doi:10.1115/1.4051006 |
|
| Wang, P., Wang, J., & Fang, F. (2021). Study on Mechanisms of Photon-Induced Material Removal on Silicon at Atomic and Close-to-Atomic Scale. Nanomanufacturing and Metrology, 4(4), 216-225. doi:10.1007/s41871-021-00116-4 |
|
| Zhou, Y., Zhang, J., & Fang, F. (2021). Vergence-accommodation conflict in optical see-through display: review and prospect. Results in Optics, 5. doi:10.1016/j.rio.2021.100160 |
|
| Zhou, Y., Zhang, J., & Fang, F. (2021). Design of a large field-of-view two-dimensional geometrical waveguide. Results in Optics, 5. doi:10.1016/j.rio.2021.100147 |
|
| Liang, F., Kang, C., Lu, Z., & Fang, F. (2021). Iso-scallop tool path planning for triangular mesh surfaces in multi-axis machining. Robotics and Computer-Integrated Manufacturing, 72. doi:10.1016/j.rcim.2021.102206 |
|
| Wu, J., Xu, Z., Zhao, J., Rommel, M., Nordlund, K., Ren, F., & Fang, F. (2021). MD simulation of two-temperature model in ion irradiation of 3C-SiC: Effects of electronic and nuclear stopping coupling, ion energy and crystal orientation. Journal of Nuclear Materials, 557. doi:10.1016/j.jnucmat.2021.153313 |
|
| Yan, N., Liu, X., Li, Z., Fang, F., & Zhang, X. (2022). Study on tool mark-induced performance degradation in optical system: simulation and application of field tracing. Journal of Optics (India). doi:10.1007/s12596-022-00914-z |
|
| Lyu, P., Lai, M., Liu, Z., & Fang, F. (2022). Damage-free finishing of Lu<inf>2</inf>O<inf>3</inf> by combining plasma-assisted etching and low-pressure polishing. CIRP Annals, 71(1), 169-172. doi:10.1016/j.cirp.2022.03.004 |
|
| Liang, F., Kang, C., & Fang, F. (2022). Tool path planning on triangular mesh surfaces based on the shortest boundary path graph. International Journal of Production Research, 60(9), 2683-2702. doi:10.1080/00207543.2021.1887535 |
|
| Li, Y., Lai, M., & Fang, F. (2022). Effects of polishing speed and a water environment on the mechanism of nanometric mechanical polishing of single-crystal lutetium oxide. Materials Today Communications, 30. doi:10.1016/j.mtcomm.2022.103194 |
|
| Han, W., Mathew, P. T., Kolagatla, S., Rodriguez, B. J., & Fang, F. (2022). Toward Single-Atomic-Layer Lithography on Highly Oriented Pyrolytic Graphite Surfaces Using AFM-Based Electrochemical Etching. Nanomanufacturing and Metrology, 5(1), 32-38. doi:10.1007/s41871-022-00127-9 |
|
| Ren, Z., Fang, F., Yan, N., & Wu, Y. (2022). State of the Art in Defect Detection Based on Machine Vision. International Journal of Precision Engineering and Manufacturing - Green Technology, 9(2), 661-691. doi:10.1007/s40684-021-00343-6 |
|
| An, H. J., Wang, J. S., & Fang, F. Z. (2022). Material removal at atomic and close-to-atomic scale by high-energy photon: a case study using atomistic-continuum method. Advances in Manufacturing, 10(1), 59-71. doi:10.1007/s40436-021-00374-x |
|
| Gao, J., Luo, X., Fang, F., & Sun, J. (2022). Fundamentals of atomic and close-to-atomic scale manufacturing: A review. International Journal of Extreme Manufacturing, 4(1). doi:10.1088/2631-7990/ac3bb2 |
|
| Shen, G., Zhang, J., & Fang, F. (2022). Study on the effect of hydrodynamic pressure on the tribological performance of textured bioimplants. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3135-3145. doi:10.1177/09544062211034196 |
|
| Fan, Y., Song, Y., Xu, Z., Wu, J., Zhu, R., Li, Q., & Fang, F. (2022). Numerical study of silicon vacancy color centers in silicon carbide by helium ion implantation and subsequent annealing. Nanotechnology, 33(12). doi:10.1088/1361-6528/ac40c1 |
|
| You, K., & Fang, F. (2022). High effective laser assisted diamond turning of binderless tungsten carbide. Journal of Materials Processing Technology, 302. doi:10.1016/j.jmatprotec.2022.117505 |
|
| Mathew, P. T., Han, W., Rodriguez, B. J., & Fang, F. (2022). Structure Fabrication on Silicon at Atomic and Close-To-Atomic Scale Using Atomic Force Microscopy: Implications for Nanopatterning and Nanodevice Fabrication. Micromachines, 13(4). doi:10.3390/mi13040524 |
|
| Guan, T., Zhang, H., Fang, F., & Zhang, N. (2022). Synthesis of two-dimensional WS<inf>2</inf>/nickel nanocomposites via electroforming for high-performance micro/nano mould tools. Surface and Coatings Technology, 437. doi:10.1016/j.surfcoat.2022.128351 |
|
| Li, Q., & Fang, F. (2022). Impacts of the gradient-index crystalline lens structure on its peripheral optical power profile. Advanced Optical Technologies, 11(1-2), 23-32. doi:10.1515/aot-2022-0003 |
|
| Liang, F., Yan, G., & Fang, F. (2022). Global time-optimal B-spline feedrate scheduling for a two-turret multi-axis NC machine tool based on optimization with genetic algorithm. Robotics and Computer-Integrated Manufacturing, 75. doi:10.1016/j.rcim.2021.102308 |
|
| Shen, G., Zhang, J., Culliton, D., Melentiev, R., & Fang, F. (2022). Tribological study on the surface modification of metal-on-polymer bioimplants. Frontiers of Mechanical Engineering, 17(2). doi:10.1007/s11465-022-0682-6 |
|
| Shen, M., Kang, C., & Fang, F. (2022). Material removal characteristics of various surface features on selective laser melted 316L stainless steel during electropolishing. Journal of Manufacturing Processes, 79, 639-653. doi:10.1016/j.jmapro.2022.04.072 |
|
| Fang, F., Lai, M., Wang, J., Luo, X., Yan, J., & Yan, Y. (2022). Nanometric cutting: Mechanisms, practices and future perspectives. International Journal of Machine Tools and Manufacture, 178. doi:10.1016/j.ijmachtools.2022.103905 |
|
| Ren, Z., Fang, F., Li, Z., & Niu, R. (2022). Intelligent evaluation for lens optical performance based on machine vision. Optics express, 30(15), 26251-26265. doi:10.1364/OE.463148 |
|
| Li, Q., & Fang, F. (2022). Contribution of cornea to the peripheral ocular refraction in the two-dimensional visual field. Results in Optics, 8. doi:10.1016/j.rio.2022.100243 |
|
| Professor Donal Finn | |
| Kathirgamanathan, A., Mangina, E., & Finn, D. P. (2021). Development of a Soft Actor Critic deep reinforcement learning approach for harnessing energy flexibility in a Large Office building. Energy and AI, 5. doi:10.1016/j.egyai.2021.100101 |
|
| McKenna, P., Turner, W. J. N., & Finn, D. P. (2021). Thermal energy storage using phase change material: Analysis of partial tank charging and discharging on system performance in a building cooling application. Applied Thermal Engineering, 198. doi:10.1016/j.applthermaleng.2021.117437 |
|
| Edwards, K., De Rosa, M., & Finn, D. P. (2021). Optimal control of fan coil battery air and water flow rates requiring minimal on-line measurements. Applied Thermal Engineering, 198. doi:10.1016/j.applthermaleng.2021.117469 |
|
| Nasrabadi, M., & Finn, D. P. (2022). Analysis of a low-temperature small approach open cooling tower integrated with radiant cooling and displacement ventilation for space conditioning in temperate climates. Advances in Building Energy Research. doi:10.1080/17512549.2022.2101524 |
|
| Pallonetto, F., De Rosa, M., & Finn, D. P. (2022). Environmental and economic benefits of building retrofit measures for the residential sector by utilizing sensor data and advanced calibrated models. Advances in Building Energy Research, 16(1), 89-117. doi:10.1080/17512549.2020.1801504 |
|
| Pinto, G., Kathirgamanathan, A., Mangina, E., Finn, D. P., & Capozzoli, A. (2022). Enhancing energy management in grid-interactive buildings: A comparison among cooperative and coordinated architectures. Applied Energy, 310. doi:10.1016/j.apenergy.2021.118497 |
|
| Neale, J., Shamsi, M. H., Mangina, E., Finn, D., & O'Donnell, J. (2022). Accurate identification of influential building parameters through an integration of global sensitivity and feature selection techniques. Applied Energy, 315. doi:10.1016/j.apenergy.2022.118956 |
|
| Bampoulas, A., Pallonetto, F., Mangina, E., & Finn, D. P. (2022). An ensemble learning-based framework for assessing the energy flexibility of residential buildings with multicomponent energy systems. Applied Energy, 315. doi:10.1016/j.apenergy.2022.118947 |
|
| De Rosa, M., Gainsford, K., Pallonetto, F., & Finn, D. P. (2022). Diversification, concentration and renewability of the energy supply in the European Union. Energy, 253. doi:10.1016/j.energy.2022.124097 |
|
| Dr Fiona Freeman | |
| Freeman, F. E., Pitacco, P., Van Dommelen, L. H. A., Nulty, J., Browe, D. C., Shin, J. -Y., et al. (2021). Development of a 3D Bioprinted Scaffold with Spatio-temporally Defined Patterns of BMP-2 and VEGF for the Regeneration of Large Bone Defects.. Bio-protocol, 11(21), e4219. doi:10.21769/bioprotoc.4219 |
|
| Barceló, X., Scheurer, S., Lakshmanan, R., Moran, C. J., Freeman, F., & Kelly, D. J. (2021). 3D bioprinting for meniscus tissue engineering: a review of key components, recent developments and future opportunities. Journal of 3D Printing in Medicine, 5(4), 213-233. doi:10.2217/3dp-2021-0017 |
|
| Freeman, F. E., Burdis, R., Mahon, O. R., Kelly, D. J., & Artzi, N. (2022). A Spheroid Model of Early and Late-Stage Osteosarcoma Mimicking the Divergent Relationship between Tumor Elimination and Bone Regeneration. Advanced Healthcare Materials, 11(7). doi:10.1002/adhm.202101296 |
|
| Browe, D. C., Díaz-Payno, P. J., Freeman, F. E., Schipani, R., Burdis, R., Ahern, D. P., et al. (2022). Bilayered extracellular matrix derived scaffolds with anisotropic pore architecture guide tissue organization during osteochondral defect repair. Acta Biomaterialia, 143, 266-281. doi:10.1016/j.actbio.2022.03.009 |
|
| Díaz-Payno, P. J., Browe, D. C., Freeman, F. E., Nulty, J., Burdis, R., & Kelly, D. J. (2022). Gremlin-1 Suppresses Hypertrophy of Engineered Cartilage In Vitro but Not Bone Formation In Vivo. Tissue Engineering - Part A, 28(15-16), 724-736. doi:10.1089/ten.tea.2021.0176 |
|
| Dr Pezhman Ghadimi | |
| Azadnia, A. H., Onofrei, G., & Ghadimi, P. (2021). Electric vehicles lithium-ion batteries reverse logistics implementation barriers analysis: A TISM-MICMAC approach. Resources, Conservation and Recycling, 174. doi:10.1016/j.resconrec.2021.105751 |
|
| Azadnia, A. H., Geransayeh, M., Onofrei, G., & Ghadimi, P. (2021). A weighted fuzzy approach for green marketing risk assessment: Empirical evidence from dairy industry. Journal of Cleaner Production, 327. doi:10.1016/j.jclepro.2021.129434 |
|
| Pourmehdi, M., Paydar, M. M., Ghadimi, P., & Azadnia, A. H. (2022). Analysis and evaluation of challenges in the integration of Industry 4.0 and sustainable steel reverse logistics network. Computers and Industrial Engineering, 163. doi:10.1016/j.cie.2021.107808 |
|
| Yue, X., Mu, D., Wang, C., Ren, H., & Ghadimi, P. (2022). Topological structure and COVID-19 related risk propagation in TFT-LCD supply networks. International Journal of Production Research. doi:10.1080/00207543.2022.2027039 |
|
| Ghadimi, P., Donnelly, O., Sar, K., Wang, C., & Azadnia, A. H. (2022). The successful implementation of industry 4.0 in manufacturing: An analysis and prioritization of risks in Irish industry. Technological Forecasting and Social Change, 175. doi:10.1016/j.techfore.2021.121394 |
|
| Rajaeifar, M. A., Ghadimi, P., Raugei, M., Wu, Y., & Heidrich, O. (2022). Challenges and recent developments in supply and value chains of electric vehicle batteries: A sustainability perspective. Resources, Conservation and Recycling, 180. doi:10.1016/j.resconrec.2021.106144 |
|
| Azadnia, A. H., Stephens, S., Ghadimi, P., & Onofrei, G. (2022). A comprehensive performance measurement framework for business incubation centres: Empirical evidence in an Irish context. Business Strategy and the Environment, 31(5), 2437-2455. doi:10.1002/bse.3036 |
|
| Professor Michael Gilchrist | |
| Zhang, H. Y., Zhang, N., Han, W., Zhang, H. G., Gilchrist, M. D., & Fang, F. Z. (2021). Characterization of process and machine dynamics on the precision replication of microlens arrays using microinjection moulding. Advances in Manufacturing, 9(3), 319-341. doi:10.1007/s40436-020-00341-y |
|
| Cournoyer, J., Karton, C., Koncan, D., Gilchrist, M. D., Cantu, R. C., & Hoshizaki, T. B. (2021). Brain trauma exposure for American tackle football players 5 to 9 and 9 to 14 years of age. Journal of Biomechanics, 127. doi:10.1016/j.jbiomech.2021.110689 |
|
| Kosziwka, G., Champoux, L., Cournoyer, J., Gilchrist, M., & Hoshizaki, T. B. (2021). Risk of head injury associated with distinct head impact events in elite women's hockey. Journal of Concussion, 5, 205970022110588. doi:10.1177/20597002211058894 |
|
| Alanezi, S., Cronin, M., Gobbo, O., O’Mara, S., O’Connor, W. T., Gilchrist, M., & Colgan, N. (2021). Identifying dynamic changes following traumatic brain injury using high resolution magnetic resonance images derived texture analysis. Physica Medica, 92, S231. doi:10.1016/s1120-1797(22)00498-7 |
|
| Zhou, Y., Fletcher, N. F., Zhang, N., Hassan, J., & Gilchrist, M. D. (2021). Enhancement of Antiviral Effect of Plastic Film against SARS-CoV-2: Combining Nanomaterials and Nanopatterns with Scalability for Mass Manufacturing. Nano Letters, 21(24), 10149-10156. doi:10.1021/acs.nanolett.1c02266 |
|
| Vale, A., Post, A., Cournoyer, J., Hoshizaki, T. B., & Gilchrist, M. D. (2022). Influence of play type on the magnitude and number of head impacts sustained in youth American football. Computer Methods in Biomechanics and Biomedical Engineering, 25(11), 1195-1210. doi:10.1080/10255842.2021.2003345 |
|
| Ji, S., Ghajari, M., Mao, H., Kraft, R. H., Hajiaghamemar, M., Panzer, M. B., et al. (2022). Use of Brain Biomechanical Models for Monitoring Impact Exposure in Contact Sports. Annals of Biomedical Engineering. doi:10.1007/s10439-022-02999-w |
|
| Meehan, A., Post, A., Hoshizaki, T. B., & Gilchrist, M. D. (2022). Investigation of an Ice Hockey Helmet Test Protocol Representing Three Concussion Event Types. Journal of Testing and Evaluation, 50(1). doi:10.1520/JTE20200436 |
|
| Meliambro, J., Karton, C., Cournoyer, J., Post, A., Hoshizaki, T. B., & Gilchrist, M. D. (2022). Comparison of head impact frequency and magnitude in youth tackle football and ice hockey. Computer Methods in Biomechanics and Biomedical Engineering, 25(8), 936-951. doi:10.1080/10255842.2021.1987420 |
|
| Zaki, S., Zhang, N., & Gilchrist, M. D. (2022). Electropolishing and Shaping of Micro-Scale Metallic Features. Micromachines, 13(3). doi:10.3390/mi13030468 |
|
| Jagannath, A., Cong, H., Hassan, J., Gonzalez, G., Gilchrist, M. D., & Zhang, N. (2022). Pathogen detection on microfluidic platforms: Recent advances, challenges, and prospects. Biosensors and Bioelectronics: X, 10. doi:10.1016/j.biosx.2022.100134 |
|
| Professor Lizbeth Goodman | |
| Langan, L., Halligan, P., Frazer, K., Darley, A., Goodman, L., & Redmond, C. (2022). Inclusive pedagogy in online simulation-based learning in undergraduate nursing education: A scoping review protocol. doi:10.12688/hrbopenres.13557.2 |
|
| Zhang, B., Goodman, L., & Gu, X. (2022). Novel 3D Contextual Interactive Games on a Gamified Virtual Environment Support Cultural Learning Through Collaboration Among Intercultural Students. SAGE Open, 12(2). doi:10.1177/21582440221096141 |
|
| Langan, L., Halligan, P., Frazer, K., Darley, A., Goodman, L., & Redmond, C. (2022). Inclusive pedagogy in online simulation-based learning in undergraduate nursing education: A scoping review protocol. doi:10.12688/hrbopenres.13557.1 |
|
| Dr Vincent Hargaden | |
| Vempiliyath, T., Thakur, M., & Hargaden, V. (2021). Development of a hybrid simulation framework for the production planning process in the atlantic salmon supply chain. Agriculture (Switzerland), 11(10). doi:10.3390/agriculture11100907 |
|
| Ramasubramanian, A. K., Mathew, R., Kelly, M., Hargaden, V., & Papakostas, N. (2022). Digital Twin for Human-Robot Collaboration in Manufacturing: Review and Outlook. Applied Sciences (Switzerland), 12(10). doi:10.3390/app12104811 |
|
| Professor Alojz Ivankovic | |
| Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., & Scarselli, G. (2022). Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites. doi:10.1002/pc.27095 |
|
| Quan, D., Murphy, N., Ivankovic, A., Zhao, G., & Alderliesten, R. (2022). Fatigue delamination behaviour of carbon fibre/epoxy composites interleaved with thermoplastic veils. Composite Structures, 281. doi:10.1016/j.compstruct.2021.114903 |
|
| Flint, T. F., Parivendhan, G., Ivankovic, A., Smith, M. C., & Cardiff, P. (2022). beamWeldFoam: Numerical simulation of high energy density fusion and vapourisation-inducing processes. SoftwareX, 18. doi:10.1016/j.softx.2022.101065 |
|
| Dr Antony Seng Kai Kho | |
| Kho, A. S. K., Ooi, E. H., Foo, J. J., & Ooi, E. T. (2021). How does saline backflow affect the treatment of saline-infused radiofrequency ablation?. Computer Methods and Programs in Biomedicine, 211. doi:10.1016/j.cmpb.2021.106436 |
|
| Kho, A. S. K., Ooi, E. H., Foo, J. J., & Ooi, E. T. (2022). Saline-infused radiofrequency ablation: A review on the key factors for a safe and reliable tumour treatment.. IEEE reviews in biomedical engineering, PP. doi:10.1109/rbme.2022.3179742 |
|
| Dr David McKeown | |
| Walsh, S., Murphy, D., Doyle, M., Reilly, J., Thompson, J., Dunwoody, R., et al. (2021). Development of the eirsat-1 cubesat through functional verification of the engineering qualification model. Aerospace, 8(9). doi:10.3390/aerospace8090254 |
|
| Dunwoody, R., Reilly, J., Murphy, D., Doyle, M., Thompson, J., Finneran, G., et al. (2022). Thermal Vacuum Test Campaign of the EIRSAT-1 Engineering Qualification Model. Aerospace, 9(2). doi:10.3390/aerospace9020099 |
|
| Doyle, M., Dunwoody, R., Finneran, G., Murphy, D., Reilly, J., Thompson, J., et al. (2022). Mission Test Campaign for the EIRSAT-1 Engineering Qualification Model. Aerospace, 9(2). doi:10.3390/aerospace9020100 |
|
| Mr Seyed Masih Mousavizadeh | |
| Mousavizadeh, S. M., & Tabaian, S. H. (2021). Effect of Mn Addition on Corrosion and Biocompatibility Characteristics of a New Biodegradable Mg–1Ca–2Zn–1RE Alloy. Metals and Materials International, 27(12), 5074-5081. doi:10.1007/s12540-020-00885-5 |
|
| Dr Neal Murphy | |
| Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., & Scarselli, G. (2022). Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites. doi:10.1002/pc.27095 |
|
| Quan, D., Murphy, N., Ivankovic, A., Zhao, G., & Alderliesten, R. (2022). Fatigue delamination behaviour of carbon fibre/epoxy composites interleaved with thermoplastic veils. Composite Structures, 281. doi:10.1016/j.compstruct.2021.114903 |
|
| Dr Di Nguyen | |
| Nguyen, D. H., & Smith, J. C. (2022). Network interdiction with asymmetric cost uncertainty. European Journal of Operational Research, 297(1), 239-251. doi:10.1016/j.ejor.2021.04.055 |
|
| Nguyen, D. H., & Smith, J. C. (2022). Asymmetric stochastic shortest-path interdiction under conditional value-at-risk. IISE Transactions, 1-13. doi:10.1080/24725854.2022.2043570 |
|
| Assoc Professor Aisling Ní Annaidh | |
| Shu, W., Heimark, H., Bertollo, N., Tobin, D. J., O'Cearbhaill, E. D., & Annaidh, A. N. (2021). Insights into the mechanics of solid conical microneedle array insertion into skin using the finite element method. Acta Biomaterialia, 135, 403-413. doi:10.1016/j.actbio.2021.08.045 |
|
| Dr Kevin Nolan | |
| Hardy, N., Dalli, J., Khan, M. F., Nolan, K., & Cahill, R. A. (2021). Aerosols, airflow, and airspace contamination during laparoscopy. The British journal of surgery, 108(9), 1022-1025. doi:10.1093/bjs/znab114 |
|
| McInerney, N., Khan, M. F., Nolan, K., & Cahill, R. A. (2021). Operating airspace and breathing zone purification using a mobile air purifier in theatre. The British journal of surgery, 108(9), e284-e285. doi:10.1093/bjs/znab148 |
|
| Mac Giolla Eain, M., Cahill, R., MacLoughlin, R., & Nolan, K. (2022). Aerosol release, distribution, and prevention during aerosol therapy: a simulated model for infection control. Drug Delivery, 29(1), 10-17. doi:10.1080/10717544.2021.2015482 |
|
| Crowley, C., Murphy, B., McCaul, C., Cahill, R., & Nolan, K. P. (2022). Airborne particle dispersion by high flow nasal oxygen: An experimental and CFD analysis. PLoS ONE, 17(1 January). doi:10.1371/journal.pone.0262547 |
|
| Anguita, R., Brennan, N., Ramsden, C. M., Mehat, M., Keegan, D., Cahill, R., et al. (2022). Patient generated aerosol in the context of ophthalmic surgery. European Journal of Ophthalmology, 32(4), 2445-2451. doi:10.1177/11206721211037823 |
|
| Crowley, C., Cahill, R., & Nolan, K. (2022). A CFD analysis of gas leaks and aerosol transport in laparoscopic surgery. Physics of Fluids, 34(8). doi:10.1063/5.0097401 |
|
| Professor Niamh Nowlan | |
| Godivier, J., Lawrence, E. A., Wang, M., Hammond, C. L., & Nowlan, N. C. (2022). Growth orientations, rather than heterogeneous growth rates, dominate jaw joint morphogenesis in the larval zebrafish. Journal of Anatomy, 241(2), 358-371. doi:10.1111/joa.13680 |
|
| Assoc Professor Eoin O'Cearbhaill | |
| Yang, K., O'Cearbhaill, E. D., Liu, S. S., Zhou, A., Chitnis, G. D., Hamilos, A. E., et al. (2021). A therapeutic convection-enhanced macroencapsulation device for enhancing ß cell viability and insulin secretion. Proceedings of the National Academy of Sciences of the United States of America, 118(37), 1DUMMUY. doi:10.1073/pnas.2101258118 |
|
| Shu, W., Heimark, H., Bertollo, N., Tobin, D. J., O'Cearbhaill, E. D., & Annaidh, A. N. (2021). Insights into the mechanics of solid conical microneedle array insertion into skin using the finite element method. Acta Biomaterialia, 135, 403-413. doi:10.1016/j.actbio.2021.08.045 |
|
| Levey, R. E., Coulter, F. B., Scheiner, K. C., Deotti, S., Robinson, S. T., McDonough, L., et al. (2021). Assessing the effects of VEGF releasing microspheres on the angiogenic and foreign body response to a 3D printed silicone-based macroencapsulation device. Pharmaceutics, 13(12). doi:10.3390/pharmaceutics13122077 |
|
| P.120: Additive Manufactured Macroencapsulation Devices for Islet Cell Replacement Therapy (2021). Transplantation, 105(12), S45. doi:10.1097/01.tp.0000804556.19924.d7 |
|
| O'Hare, E., Cogan, J. A., Dillon, F., Lowery, M., & O'Cearbhaill, E. D. (2022). An Intraoral Non-Occlusal MEMS Sensor for Bruxism Detection. IEEE Sensors Journal, 22(1), 153-161. doi:10.1109/JSEN.2021.3128246 |
|
| Torreggiani, R. C., Singh, G., Torreggiani, W., & O'Cearbhaill, E. (2022). Development of a 3D Printed Benchtop Model of the Pulmonary System to Assist in the Development of Device to Treat Large Pulmonary Thromboembolic Disease. Procedia CIRP, 110(C), 162-167. doi:10.1016/j.procir.2022.06.030 |
|
| Singh, G., Paetzold, R., Coulter, F., McMahon, C. J., Walsh, K., & Ronan, W. (2022). Fused Filament Fabrication of Bioresorbable Stent on a Rotating Mandrel. Procedia CIRP, 110(C), 156-161. doi:10.1016/j.procir.2022.06.029 |
|
| Mulligan, K. M., Bartels, H. C., Armstrong, F., Immel, E., Corcoran, S., Walsh, J. M., et al. (2022). Comparing three-dimensional models of placenta accreta spectrum with surgical findings. International Journal of Gynecology and Obstetrics, 157(1), 188-197. doi:10.1002/ijgo.13743 |
|
| Paetzold, R., Coulter, F. B., Singh, G., Kelly, D. J., & O'Cearbhaill, E. D. (2022). Fused filament fabrication of polycaprolactone bioscaffolds: Influence of fabrication parameters and thermal environment on geometric fidelity and mechanical properties. Bioprinting, 27. doi:10.1016/j.bprint.2022.e00206 |
|
| Assoc Professor James O'Donnell | |
| Ali, U., Shamsi, M. H., Hoare, C., Mangina, E., & O'Donnell, J. (2021). Review of urban building energy modeling (UBEM) approaches, methods and tools using qualitative and quantitative analysis. Energy and Buildings, 246. doi:10.1016/j.enbuild.2021.111073 |
|
| Shamsi, M. H., Ali, U., Mangina, E., & O'Donnell, J. (2021). Feature assessment frameworks to evaluate reduced-order grey-box building energy models. Applied Energy, 298. doi:10.1016/j.apenergy.2021.117174 |
|
| Shaw, C., de Andrade Pereira, F., McNally, C., Farghaly, K., Hartmann, T., & O'Donnell, J. (2022). Information management in the facilities domain: investigating practitioner priorities. Facilities. doi:10.1108/F-02-2022-0033 |
|
| Hu, S., Wang, P., Hoare, C., & O'Donnell, J. (2022). Building Occupancy Detection and Localisation using CCTV Camera and Deep Learning. IEEE Internet of Things Journal. doi:10.1109/JIOT.2022.3201877 |
|
| Malhotra, A., Bischof, J., Nichersu, A., Häfele, K. H., Exenberger, J., Sood, D., et al. (2022). Information modelling for urban building energy simulation—A taxonomic review. Building and Environment, 208. doi:10.1016/j.buildenv.2021.108552 |
|
| Neale, J., Shamsi, M. H., Mangina, E., Finn, D., & O'Donnell, J. (2022). Accurate identification of influential building parameters through an integration of global sensitivity and feature selection techniques. Applied Energy, 315. doi:10.1016/j.apenergy.2022.118956 |
|
| Aghamolaei, R., Azizi, M. M., Aminzadeh, B., & O’Donnell, J. (2022). A comprehensive review of outdoor thermal comfort in urban areas: Effective parameters and approaches. Energy & Environment, 0958305X2211161. doi:10.1177/0958305x221116176 |
|
| Assoc Professor Vikram Pakrashi | |
| Koszewnik, A., Lesniewski, K., & Pakrashi, V. (2021). Numerical analysis and experimental verification of damage identification metrics for smart beam with mfc elements to support structural health monitoring. Sensors, 21(20). doi:10.3390/s21206796 |
|
| Buckley, T., Ghosh, B., & Pakrashi, V. (2021). Edge structural health monitoring (E-shm) using low-power wireless sensing. Sensors, 21(20). doi:10.3390/s21206760 |
|
| Buckley, T., Pakrashi, V., & Ghosh, B. (2021). A dynamic harmonic regression approach for bridge structural health monitoring. Structural Health Monitoring, 20(6), 3150-3181. doi:10.1177/1475921720981735 |
|
| Pakrashi, V., Murphy, J., & Hazra, B. (2021). Special Section on Risk and Uncertainties in Offshore Wind and Wave Energy Systems. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 7(4). | |
| Mucchielli, P., Bhowmik, B., Ghosh, B., & Pakrashi, V. (2021). Real-time accurate detection of wind turbine downtime - An Irish perspective. Renewable Energy, 179, 1969-1989. doi:10.1016/j.renene.2021.07.139 |
|
| Schoefs, F., O’byrne, M., Pakrashi, V., Ghosh, B., Oumouni, M., Soulard, T., & Reynaud, M. (2021). Fractal dimension as an effective feature for characterizing hard marine growth roughness from underwater image processing in controlled and uncontrolled image environments. Journal of Marine Science and Engineering, 9(12). doi:10.3390/jmse9121344 |
|
| Khan, M. A., McCrum, D. P., OBrien, E. J., Bowe, C., Hester, D., McGetrick, P. J., et al. (2022). Re-deployable sensors for modal estimates of bridges and detection of damage-induced changes in boundary conditions. Structure and Infrastructure Engineering, 18(8), 1177-1191. doi:10.1080/15732479.2021.1887292 |
|
| Inturi, V., Balaji, S. V., Gyanam, P., Pragada, B. P. V., Geetha Rajasekharan, S., & Pakrashi, V. (2022). An integrated condition monitoring scheme for health state identification of a multi-stage gearbox through Hurst exponent estimates. Structural Health Monitoring. doi:10.1177/14759217221092828 |
|
| Buckley, T., Ghosh, B., & Pakrashi, V. (2022). A Feature Extraction & Selection Benchmark for Structural Health Monitoring. Structural Health Monitoring. doi:10.1177/14759217221111141 |
|
| Bhowmik, B., Panda, S., Hazra, B., & Pakrashi, V. (2022). Feedback-driven error-corrected single-sensor analytics for real-time condition monitoring. International Journal of Mechanical Sciences, 214. doi:10.1016/j.ijmecsci.2021.106898 |
|
| Micu, E. A., Obrien, E. J., Bowe, C., Fitzgerald, P., & Pakrashi, V. (2022). Bridge Damage and Repair Detection Using an Instrumented Train. Journal of Bridge Engineering, 27(3). doi:10.1061/(ASCE)BE.1943-5592.0001827 |
|
| Pakrashi, V. (2022). Editorial. Infrastructure Asset Management, 9(1), 1-2. doi:10.1680/jinam.2022.9.1.1 |
|
| Liang, H., Hao, G., Olszewski, O. Z., & Pakrashi, V. (2022). Ultra-low wide bandwidth vibrational energy harvesting using a statically balanced compliant mechanism. International Journal of Mechanical Sciences, 219. doi:10.1016/j.ijmecsci.2022.107130 |
|
| Varghese, R., Pakrashi, V., & Bhattacharya, S. (2022). A Compendium of Formulae for Natural Frequencies of Offshore Wind Turbine Structures. Energies, 15(8). doi:10.3390/en15082967 |
|
| Pakrashi, V. (2022). Editorial. Proceedings of Institution of Civil Engineers: Energy, 175(2), 47-48. doi:10.1680/jener.2022.175.2.47 |
|
| Otter, A., Murphy, J., Pakrashi, V., Robertson, A., & Desmond, C. (2022). A review of modelling techniques for floating offshore wind turbines. Wind Energy, 25(5), 831-857. doi:10.1002/we.2701 |
|
| Chawla, R., & Pakrashi, V. (2022). Dynamic responses of a damaged double Euler–Bernoulli beam traversed by a ‘phantom’ vehicle. Structural Control and Health Monitoring, 29(5). doi:10.1002/stc.2933 |
|
| Hadas, Z., Zelenika, S., & Pakrashi, V. (2022). Sensors Special Issue: “Vibration Energy Harvesting for Wireless Sensors”. Sensors, 22(12). doi:10.3390/s22124578 |
|
| Huseynov, F., Hester, D., Obrien, E. J., McGeown, C., Kim, C. W., Chang, K., & Pakrashi, V. (2022). Monitoring the Condition of Narrow Bridges Using Data from Rotation-Based and Strain-Based Bridge Weigh-in-Motion Systems. Journal of Bridge Engineering, 27(7). doi:10.1061/(ASCE)BE.1943-5592.0001872 |
|
| Demartino, C., Quaranta, G., Maruccio, C., & Pakrashi, V. (2022). Feasibility of energy harvesting from vertical pedestrian-induced vibrations of footbridges for smart monitoring applications. Computer-Aided Civil and Infrastructure Engineering, 37(8), 1044-1065. doi:10.1111/mice.12777 |
|
| Mucchielli, P., Gogoi, A., Hazra, B., & Pakrashi, V. (2022). A mathematically consistent stochastic simulation of a 3D pendulum tuned mass damper and tuning. Nonlinear Dynamics, 109(2), 401-418. doi:10.1007/s11071-022-07556-7 |
|
| Assoc Professor Nikolaos Papakostas | |
| Ramasubramanian, A. K., Connolly, M., Mathew, R., & Papakostas, N. (2022). Automatic simulation-based design and validation of robotic gripper fingers. CIRP Annals, 71(1), 137-140. doi:10.1016/j.cirp.2022.04.054 |
|
| Ramasubramanian, A. K., Mathew, R., Kelly, M., Hargaden, V., & Papakostas, N. (2022). Digital Twin for Human-Robot Collaboration in Manufacturing: Review and Outlook. Applied Sciences (Switzerland), 12(10). doi:10.3390/app12104811 |
|
| Dr Vishnu Prasad | |
| P.S, S., Prasad, V., Pahovnik, D., Thomas, S., Haponiuk, J. T., & George, S. C. (2022). Study the effect of fumed silica on the mechanical, thermal and tribological properties of silicone rubber nanocomposites. Journal of Polymer Research, 29(2). doi:10.1007/s10965-022-02905-x |
|
| Alliyankal Vijayakumar, A., Prasad, V., & Kailathuvalappil Kochunny, M. (2022). Investigation on the effect of stacking order and hybridization on mechanical and water absorption properties of woven flax/bamboo composites. Polymer Composites, 43(8), 5189-5207. doi:10.1002/pc.26808 |
|
| Dr Aasifa Rounak | |
| Biswas, S., Rounak, A., Perlikowski, P., & Gupta, S. (2021). Characterising stochastic fixed points and limit cycles for dynamical systems with additive noise. Communications in Nonlinear Science and Numerical Simulation, 101, 105870. doi:10.1016/j.cnsns.2021.105870 |
|
| Dr Gurminder Singh | |
| Singh, G., Missiaen, J. M., Bouvard, D., & Chaix, J. M. (2021). Additive manufacturing of 17–4 PH steel using metal injection molding feedstock: Analysis of 3D extrusion printing, debinding and sintering. Additive Manufacturing, 47. doi:10.1016/j.addma.2021.102287 |
|
| Walia, A. S., Srivastava, V., Rana, P. S., Somani, N., Gupta, N. K., Singh, G., et al. (2021). Prediction of tool shape in electrical discharge machining of en31 steel using machine learning techniques. Metals, 11(11). doi:10.3390/met11111668 |
|
| Singh, N., & Singh, G. (2021). Advances in polymers for bio-additive manufacturing: A state of art review. Journal of Manufacturing Processes, 72, 439-457. doi:10.1016/j.jmapro.2021.10.045 |
|
| Singh, G., Sharma, S., Mittal, M., Singh, G., Singh, J., Changhe, L., et al. (2022). Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7%-Aloxite reinforced hydroxyapatite coatings deposited on titanium alloy-based biomedical implants. Journal of Materials Research and Technology, 18, 1358-1380. doi:10.1016/j.jmrt.2022.03.065 |
|
| Dr William Smith | |
| Lin, C., Ceburnis, D., Trubetskaya, A., Xu, W., Smith, W., Hellebust, S., et al. (2021). On the use of reference mass spectra for reducing uncertainty in source apportionment of solid-fuel burning in ambient organic aerosol. Atmospheric Measurement Techniques, 14(10), 6905-6916. doi:10.5194/amt-14-6905-2021 |
|
| Brophy, B., McCormack, E., Smith, W., & Timoney, D. (2021). Interactive, bottom-up model to audit the true per-person energy consumption (direct and embedded) of Irish citizens per annum. Energy Reports, 7, 1025-1045. doi:10.1016/j.egyr.2020.05.012 |
|
| Dr Giovanni Tardioli | |
| Misaghian, M. S., Tardioli, G., Cabrera, A. G., Salerno, I., Flynn, D., & Kerrigan, R. (2022). Assessment of Carbon-Aware Flexibility Measures from Data Centres using Machine Learning. IEEE Transactions on Industry Applications. doi:10.1109/TIA.2022.3213637 |
|
| Tardioli, G., Filho, R., Bernaud, P., & Ntimos, D. (2022). An Innovative Modelling Approach Based on Building Physics and Machine Learning for the Prediction of Indoor Thermal Comfort in an Office Building. Buildings, 12(4). doi:10.3390/buildings12040475 |
|
| Mr Joseph Thompson | |
| Walsh, S., Murphy, D., Doyle, M., Reilly, J., Thompson, J., Dunwoody, R., et al. (2021). Development of the eirsat-1 cubesat through functional verification of the engineering qualification model. Aerospace, 8(9). doi:10.3390/aerospace8090254 |
|
| Murphy, D., Ulyanov, A., McBreen, S., Doyle, M., Dunwoody, R., Mangan, J., et al. (2021). A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance. Experimental Astronomy, 52(1-2), 59-84. doi:10.1007/s10686-021-09779-9 |
|
| Dunwoody, R., Reilly, J., Murphy, D., Doyle, M., Thompson, J., Finneran, G., et al. (2022). Thermal Vacuum Test Campaign of the EIRSAT-1 Engineering Qualification Model. Aerospace, 9(2). doi:10.3390/aerospace9020099 |
|
| Doyle, M., Dunwoody, R., Finneran, G., Murphy, D., Reilly, J., Thompson, J., et al. (2022). Mission Test Campaign for the EIRSAT-1 Engineering Qualification Model. Aerospace, 9(2). doi:10.3390/aerospace9020100 |
|
| Murphy, D., Ulyanov, A., McBreen, S., Mangan, J., Dunwoody, R., Doyle, M., et al. (2022). A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation. Experimental Astronomy, 53(3), 961-990. doi:10.1007/s10686-022-09842-z |
|
| Assoc Professor David Timoney | |
| Brophy, B., McCormack, E., Smith, W., & Timoney, D. (2021). Interactive, bottom-up model to audit the true per-person energy consumption (direct and embedded) of Irish citizens per annum. Energy Reports, 7, 1025-1045. doi:10.1016/j.egyr.2020.05.012 |
|
| Dr Anton van Beek | |
| Tao, S., van Beek, A., Apley, D. W., & Chen, W. (2021). Multi-Model Bayesian Optimization for Simulation-Based Design. Journal of Mechanical Design, 143(11). doi:10.1115/1.4050738 |
|
| Giuntoli, A., Hansoge, N. K., van Beek, A., Meng, Z., Chen, W., & Keten, S. (2021). Systematic coarse-graining of epoxy resins with machine learning-informed energy renormalization. npj Computational Materials, 7(1). doi:10.1038/s41524-021-00634-1 |
|
| Wang, L., van Beek, A., Da, D., Chan, Y. -C., Zhu, P., & Chen, W. (2022). Data-driven multiscale design of cellular composites with multiclass microstructures for natural frequency maximization. Composite Structures, 280, 114949. doi:10.1016/j.compstruct.2021.114949 |
|
| Wei, T., van Beek, A., Hao, J., Zhang, H., & Chen, W. (2022). Bayesian Calibration of Performance Degradation in a Gas Turbine-Driven Compressor Unit for Prognosis Health Management. Journal of Engineering for Gas Turbines and Power, 144(5). doi:10.1115/1.4053564 |
|
| Ghumman, U. F., van Beek, A., Munshi, J., Chien, T., Balasubramanian, G., & Chen, W. (2022). Designing active layer of organic solar cells using multi-fidelity molecular simulations and spectral density function. Computational Materials Science, 211, 111491. doi:10.1016/j.commatsci.2022.111491 |
|
| Dr Ramon Varghese | |
| Varghese, R., Pakrashi, V., & Bhattacharya, S. (2022). A Compendium of Formulae for Natural Frequencies of Offshore Wind Turbine Structures. Energies, 15(8). doi:10.3390/en15082967 |
|
| Professor Dimitrios Zevgolis | |
| Wu, Z., Korntner, S. H., Mullen, A. M., & Zeugolis, D. I. (2021). In the quest of the optimal chondrichthyan for the development of collagen sponges for articular cartilage. Journal of Science: Advanced Materials and Devices, 6(3), 390-398. doi:10.1016/j.jsamd.2021.04.002 |
|
| Ryan, C. N. M., Pugliese, E., Shologu, N., Gaspar, D., Rooney, P., Islam, M. N., et al. (2021). A combined physicochemical approach towards human tenocyte phenotype maintenance. Materials Today Bio, 12. doi:10.1016/j.mtbio.2021.100130 |
|
| Giannini, C., Olsson, U., Raucci, M. G., & Zeugolis, D. I. (2021). Editorial: Fibrous Assemblies: From Synthesis and Nanostructure Characterization to Materials Development and Application. Frontiers in Bioengineering and Biotechnology, 9. doi:10.3389/fbioe.2021.778094 |
|
| Raghunath, M., & Zeugolis, D. I. (2021). Transforming eukaryotic cell culture with macromolecular crowding. Trends in Biochemical Sciences, 46(10), 805-811. doi:10.1016/j.tibs.2021.04.006 |
|
| Coentro, J. Q., May, U., Prince, S., Zwaagstra, J., Ritvos, O., Järvinen, T. A. H., & Zeugolis, D. I. (2021). Adapting the Scar-in-a-Jar to Skin Fibrosis and Screening Traditional and Contemporary Anti-Fibrotic Therapies. Frontiers in Bioengineering and Biotechnology, 9. doi:10.3389/fbioe.2021.756399 |
|
| De Pieri, A., Rochev, Y., & Zeugolis, D. I. (2021). Scaffold-free cell-based tissue engineering therapies: advances, shortfalls and forecast. npj Regenerative Medicine, 6(1). doi:10.1038/s41536-021-00133-3 |
|
| Coentro, J. Q., Di Nubila, A., May, U., Prince, S., Zwaagstra, J., Järvinen, T. A. H., & Zeugolis, D. I. (2022). Dual drug delivery collagen vehicles for modulation of skin fibrosis in vitro. Biomedical Materials (Bristol), 17(2). doi:10.1088/1748-605X/ac5673 |
|
| Rampin, A., Skoufos, I., Raghunath, M., Tzora, A., Diakakis, N., Prassinos, N., & Zeugolis, D. I. (2022). Allogeneic Serum and Macromolecular Crowding Maintain Native Equine Tenocyte Function in Culture. Cells, 11(9). doi:10.3390/cells11091562 |
|
| Shologu, N., Gurdal, M., Szegezdi, E., FitzGerald, U., & Zeugolis, D. I. (2022). Macromolecular crowding in the development of a three-dimensional organotypic human breast cancer model. Biomaterials, 287. doi:10.1016/j.biomaterials.2022.121642 |
|
| De Pieri, A., Korntner, S. H., Capella-Monsonis, H., Tsiapalis, D., Kostjuk, S. V., Churbanov, S., et al. (2022). Macromolecular crowding transforms regenerative medicine by enabling the accelerated development of functional and truly three-dimensional cell assembled micro tissues. Biomaterials, 287. doi:10.1016/j.biomaterials.2022.121674 |
|
| Dr Jufan Zhang | |
| Shen, G., Zhang, J., Kang, C., & Fang, F. (2021). Study on surface texture patterns for improving tribological performance of bioimplants. Surface and Coatings Technology, 422. doi:10.1016/j.surfcoat.2021.127567 |
|
| Zhang, J., & Shen, G. (2021). Advances of wear reduction of artificial joints: regenerative cartilage artificial joints.. Int J Adv Nano Comput Anal, 1(1), 18-28. | |
| Zhou, Y., Zhang, J., & Fang, F. (2021). Vergence-accommodation conflict in optical see-through display: review and prospect. Results in Optics, 5. doi:10.1016/j.rio.2021.100160 |
|
| Zhou, Y., Zhang, J., & Fang, F. (2021). Design of a large field-of-view two-dimensional geometrical waveguide. Results in Optics, 5. doi:10.1016/j.rio.2021.100147 |
|
| Shen, G., Zhang, J., & Fang, F. (2022). Study on the effect of hydrodynamic pressure on the tribological performance of textured bioimplants. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3135-3145. doi:10.1177/09544062211034196 |
|
| Shen, G., Zhang, J., Culliton, D., Melentiev, R., & Fang, F. (2022). Tribological study on the surface modification of metal-on-polymer bioimplants. Frontiers of Mechanical Engineering, 17(2). doi:10.1007/s11465-022-0682-6 |
|
| Dr Nan Zhang | |
| Zhang, H. Y., Zhang, N., Han, W., Zhang, H. G., Gilchrist, M. D., & Fang, F. Z. (2021). Characterization of process and machine dynamics on the precision replication of microlens arrays using microinjection moulding. Advances in Manufacturing, 9(3), 319-341. doi:10.1007/s40436-020-00341-y |
|
| Li, Q., Zhang, N., Ni, L., Wei, Z., Quan, H., & Zhou, Y. (2021). One-pot high efficiency low temperature ultrasonic-assisted strategy for fully bio-based coloristic, anti-pilling, antistatic, bioactive and reinforced cashmere using grape seed proanthocyanidins. Journal of Cleaner Production, 315. doi:10.1016/j.jclepro.2021.128148 |
|
| Zhang, H., Zhang, N., & Fang, F. (2021). Study of ion transportation and electrodeposition under hybrid agitation for electroforming of variable aspect ratios micro structures. Precision Engineering, 72, 122-143. doi:10.1016/j.precisioneng.2021.04.008 |
|
| Zhang, H., Zhang, N., & Fang, F. (2021). Study on Controllable Thickness and Flatness of Wafer-Scale Nickel Shim in Precision Electroforming Process: Simulation and Validation. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143(11). doi:10.1115/1.4051006 |
|
| Zhang, H., Guan, T., Zhang, N., & Fang, F. (2021). Fabrication of permanent self-lubricating 2D material-reinforced nickel mould tools using electroforming. International Journal of Machine Tools and Manufacture, 170. doi:10.1016/j.ijmachtools.2021.103802 |
|
| Zhou, Y., Fletcher, N. F., Zhang, N., Hassan, J., & Gilchrist, M. D. (2021). Enhancement of Antiviral Effect of Plastic Film against SARS-CoV-2: Combining Nanomaterials and Nanopatterns with Scalability for Mass Manufacturing. Nano Letters, 21(24), 10149-10156. doi:10.1021/acs.nanolett.1c02266 |
|
| Zaki, S., Zhang, N., & Gilchrist, M. D. (2022). Electropolishing and Shaping of Micro-Scale Metallic Features. Micromachines, 13(3). doi:10.3390/mi13030468 |
|
| Cong, H., & Zhang, N. (2022). Perspectives in translating microfluidic devices from laboratory prototyping into scale-up production. Biomicrofluidics, 16(2). doi:10.1063/5.0079045 |
|
| Jagannath, A., Cong, H., Hassan, J., Gonzalez, G., Gilchrist, M. D., & Zhang, N. (2022). Pathogen detection on microfluidic platforms: Recent advances, challenges, and prospects. Biosensors and Bioelectronics: X, 10. doi:10.1016/j.biosx.2022.100134 |
|
| Guan, T., Zhang, H., Fang, F., & Zhang, N. (2022). Synthesis of two-dimensional WS<inf>2</inf>/nickel nanocomposites via electroforming for high-performance micro/nano mould tools. Surface and Coatings Technology, 437. doi:10.1016/j.surfcoat.2022.128351 |
|
| Guan, T., Yuket, S., Cong, H., Carton, D. W., & Zhang, N. (2022). Permanent Hydrophobic Surface Treatment Combined with Solvent Vapor-Assisted Thermal Bonding for Mass Production of Cyclic Olefin Copolymer Microfluidic Chips. ACS Omega, 7(23), 20104-20117. doi:10.1021/acsomega.2c01948 |
|
| Professor David Browne | |
| Bagasol, A. J., Kaschel, F., Ramchandran, S., Mirihanage, W., Browne, D., & Dowling, D. (2022). The influence of a large build area on the microstructure and mechanical properties of PBF-LB Ti-6Al-4V alloy. doi:10.21203/rs.3.rs-1723391/v1 |
|
| Assoc Professor Philip Cardiff | |
| Javaid, U., Aumjaud, P., Whelan, B., & Cardiff, P. (2021). Mechanical performance of carbon-fibre braided composite tubes in tension and compression. doi:10.31224/osf.io/mw5tp |
|
| Assoc Professor Vikram Pakrashi | |
| Chawla, R., Rounak, A., & Pakrashi, V. (2022). Stability analysis of hybrid systems with higher order transverse discontinuity mapping. doi:10.21203/rs.3.rs-1527114/v1 |
|
| Chawla, R., Rounak, A., & Pakrashi, V. (2022). Stability analysis of hybrid systems with higher order transverse discontinuity mapping. doi:10.21203/rs.3.rs-1527114/v2 |
|
| Dr Aasifa Rounak | |
| Rounak, A., & Gupta, S. (2022). Isochronous sets in smooth and non-smooth mechanical oscillators. doi:10.21203/rs.3.rs-1212827/v1 |
|
| Chawla, R., Rounak, A., & Pakrashi, V. (2022). Stability analysis of hybrid systems with higher order transverse discontinuity mapping. doi:10.21203/rs.3.rs-1527114/v1 |
|
| Professor Fengzhou Fang | |
| Shen, G., Fang, F., & Zhang, J. (2022). The Effect of Sliding Orientation and Floor Profile on the Tribological Performance of Textured Bioimplants. doi:10.1007/978-981-19-1918-3_20 |
|
| Dr Kevin Nolan | |
| O'Dea, J., Nolan, K., & Perretta, S. (2021). Protecting OR staff from aerosols in COVID-19 and beyond. IRCAD France (Online). | |
| Nolan, K. (2022). The Fluid Dynamics of Keyhole Surgery and the Risks to Theatre Staff. University of Limerick. | |
| Dr Jufan Zhang | |
| Zhang, J. (2021). Invited talk: Development of textured artificial joints. | |
| Shen, G., Fang, F., & Zhang, J. (2022). The Effect of Sliding Orientation and Floor Profile on the Tribological Performance of Textured Bioimplants. doi:10.1007/978-981-19-1918-3_20 |
|