Below is the list of research publications for the School of Mechanical and Materials Engineering in the academic year 2022/23.
| Dr Anna Kelly | |
|
Kelly, A. M., Padden, L., & Fleming, B. (n.d.). Making Inclusive Higher Education a Reality. Routledge. doi:10.4324/9781003253631  |
|
|
Kelly, A., Padden, L., & Fleming, B. (2023). Making Inclusive Higher Education a Reality: Creating a University for All.. A. Kelly (Ed.), 4 Park Square, Milton Park, Abingdon, Oxon OX144RN: Routledge. doi:10.4324/97810032253631 |
|
| Dr Mert Celikin | |
|
Celikin, M., Azadi, A., Kim, H., Vaughan, T., & O’cearbhaill, E. (2023). Development of Magnesium-Strontium/ Calcium (Mg-Sr/Ca)-Based Alloys with Improved Sinterability for Next-Generation Biomedical Implants. In Unknown Book (pp. 175-180). doi:10.1007/978-3-031-22645-8_33 |
|
| Professor Fengzhou Fang | |
|
Zhang, J., Zhou, Y., & Fang, F. (n.d.). Advancements in Optical See-through Near-Eye Display. In Advances in Virtual Reality [Working Title]. IntechOpen. doi:10.5772/intechopen.108309 |
|
| Professor Michael Gilchrist | |
|
Acot, B., Glisic, B., Dettwiler, A., & Gilchrist, M. D. (2023). Predicting Neurological Effects Associated with Traumatic Brain Injuries Using Video Analysis and Finite Element Modeling. In Lecture Notes in Computational Vision and Biomechanics (Vol. 38, pp. 90-100). doi:10.1007/978-3-031-10015-4_8 |
|
| Professor Alojz Ivankovic | |
|
Quan, D., Scarselli, G., Murphy, N., & Ivankovic, A. (2023). Adhesive joining of thermoplastic composites. In Advances in Structural Adhesive Bonding, Second Edition (pp. 389-415). doi:10.1016/B978-0-323-91214-3.00007-7 |
|
|
Blackman, B., Sun, F., Teixeira de Freitas, S., de Barros, S., Moreira Arouche, M., & Ivankovic, A. (2023). Understanding fracture mode-mixity and its effects on bond performance. In Advances in Structural Adhesive Bonding, Second Edition (pp. 579-613). doi:10.1016/B978-0-323-91214-3.00015-6 |
|
| Dr Anna Kelly | |
|
Kelly, A. M. (2023). Adopting an institutional approach – moving from silos to mainstreaming inclusion. In Making Inclusive Higher Education a Reality (pp. 21-32). Routledge. doi:10.4324/9781003253631-3 |
|
|
Kelly, A. M., Padden, L., & Fleming, B. (2023). Introduction. In Making Inclusive Higher Education a Reality (pp. 1-18). Routledge. doi:10.4324/9781003253631-1 |
|
|
Kelly, A. M. (2023). Conclusion – carpe diem – seize the day!. In Making Inclusive Higher Education a Reality (pp. 206-220). Routledge. doi:10.4324/9781003253631-31 |
|
| Dr Neal Murphy | |
|
Quan, D., Scarselli, G., Murphy, N., & Ivankovic, A. (2023). Adhesive joining of thermoplastic composites. In Advances in Structural Adhesive Bonding, Second Edition (pp. 389-415). doi:10.1016/B978-0-323-91214-3.00007-7 |
|
| Assoc Professor Eoin O'Cearbhaill | |
|
Celikin, M., Azadi, A., Kim, H., Vaughan, T., & O’cearbhaill, E. (2023). Development of Magnesium-Strontium/ Calcium (Mg-Sr/Ca)-Based Alloys with Improved Sinterability for Next-Generation Biomedical Implants. In Unknown Book (pp. 175-180). doi:10.1007/978-3-031-22645-8_33 |
|
| Assoc Professor Vikram Pakrashi | |
|
González-Sopeña, J. M., Ghosh, B., Mucchielli, P., Bhowmik, B., & Pakrashi, V. (2023). Short-term power prediction and downtime classification. In Wind Energy Engineering: A Handbook for Onshore and Offshore Wind Turbines (pp. 489-498). doi:10.1016/B978-0-323-99353-1.00009-8 |
|
|
Pakrashi, V., Ruane, K., Jaksic, V., Malekjafarian, A., O’Byrne, M., Schoefs, F., et al. (2023). Some challenges and opportunities around lifetime performance and durability of wind turbines. In Wind Energy Engineering: A Handbook for Onshore and Offshore Wind Turbines (pp. 289-298). doi:10.1016/B978-0-323-99353-1.00032-3 |
|
|
James, M., Haldar, S., Varghese, R., Bhattacharya, S., & Pakrashi, V. (2023). Climate change effects on offshore wind turbines. In Wind Energy Engineering: A Handbook for Onshore and Offshore Wind Turbines (pp. 413-422). doi:10.1016/B978-0-323-99353-1.00030-X |
|
| Dr Jufan Zhang | |
|
Zhang, J., Zhou, Y., & Fang, F. (n.d.). Advancements in Optical See-through Near-Eye Display. In Advances in Virtual Reality [Working Title]. IntechOpen. doi:10.5772/intechopen.108309 |
|
| Dr Mert Celikin | |
|
Mossop, T., Heard, D., & Celikin, M. (2023). Assessment of Phase Evolution in Titanium-Niobium-Based Alloys During Rapid Solidification. In Minerals, Metals and Materials Series (pp. 111-119). doi:10.1007/978-3-031-22524-6_12 |
|
| Professor Michael Gilchrist | |
|
Zaki, S., Zhang, N., & Gilchrist, M. D. (2023). USE OF PULSED CURRENTS FOR ELECTROPOLISHING AND SHAPING OF MICRO-MOULD TOOLS TO REDUCE DEMOULDING DEFECTS. In Proceedings of the Thermal and Fluids Engineering Summer Conference Vol. 2023-March (pp. 1573-1580). |
|
| Dr David McKeown | |
|
Akarapu, S. K. R., Stijnen, B., Mckenna, C., Mckeown, D., Murphy, D., Reilly, J., et al. (2023). Development of a Nanosatellite System Modeling Architecture for EIRSAT-1. In Proceedings - 2023 IEEE 9th International Conference on Space Mission Challenges for Information Technology, SMC-IT 2023 (pp. 123-125). doi:10.1109/SMC-IT56444.2023.00022 |
|
| Dr Neal Murphy | |
|
Yasar, M., Murphy, N., & Ivankovic, A. (2023). Development and Characterization of Epoxy-Based Polymer Composites Containing Piezoelectric and Electrically Conductive Fillers. In 2023 IEEE International Symposium on Applications of Ferroelectrics (ISAF). IEEE. doi:10.1109/isaf53668.2023.10265437 |
|
| Assoc Professor Nikolaos Papakostas | |
|
Papakostas, N., Mourtzis, D., Bechrakis, K., Chryssolouris, G., Doukas, D., & Doyle, R. (2023). A FLEXIBLE AGENT BASED FRAMEWORK FOR MANUFACTURING DECISION-MAKING. In Proceeding of Flexible Automation and Integrated Manufacturing 1999. Begellhouse. doi:10.1615/faim1999.670 |
|
| Dr Joseph Thompson | |
|
Akarapu, S. K. R., Stijnen, B., Mckenna, C., Mckeown, D., Murphy, D., Reilly, J., et al. (2023). Development of a Nanosatellite System Modeling Architecture for EIRSAT-1. In Proceedings - 2023 IEEE 9th International Conference on Space Mission Challenges for Information Technology, SMC-IT 2023 (pp. 123-125). doi:10.1109/SMC-IT56444.2023.00022 |
|
| Dr Anton van Beek | |
|
van Beek, A. (2023). Bayesian Optimization for Intrinsically Noisy Response Surfaces. In 14th International Conference on Applications of Statistics and Probability in Civil Engineering, Vol. 14th (pp. 1-11). Dublin: oxford. |
|
| Dr Xuehui Wang | |
|
Li, Y., Zhu, W., Luo, D., Shi, Y., Ren, Y., Wang, X., & Yan, Y. (2022). Experimental Study on Thermal Contact Resistance of Thermoelectric Generators. In AIP Conference Proceedings Vol. 2681. doi:10.1063/5.0117221 |
|
| Professor Dimitrios Zevgolis | |
|
Nemati, S., Kilcoyne, M., Zevgolis, D., & McMahon, S. (2023). THE EFFECT OF MACROMOLECULAR CROWDERS ON DEPOSITION OF EXTRACELLULAR MATRIX IN ASTROCYTES. In TISSUE ENGINEERING PART A Vol. 29 (pp. 972-973). |
|
| Dr Jufan Zhang | |
|
Zhou, Y., Fengzhou, F., & Zhang, J. (2022). Design of the Freeform TIR Collimator.. In 8th International Conference on Nanomanufacturing & 4th AET Symposium on ACSM and Digital Manufacturing. |
|
| Dr Nan Zhang | |
|
Sharbati, V., Bao, X., Healy, J. J., & Zhang, N. (2023). Investigation of Reconfigurable Liquid Metal Antenna With Multi Bands Circular Polarization for SNR Improvement. In 2023 34th Irish Signals and Systems Conference, ISSC 2023. doi:10.1109/ISSC59246.2023.10162058 |
|
|
Sharbati, V., Bao, X., Healy, J. J., & Zhang, N. (2023). Reconfigurable Antenna with Circular Polarization on Dual WiMAX Bands Based On Liquid Metal Switching Capability. In 2023 International Workshop on Antenna Technology, iWAT 2023. doi:10.1109/iWAT57058.2023.10171728 |
|
|
Zaki, S., Zhang, N., & Gilchrist, M. D. (2023). USE OF PULSED CURRENTS FOR ELECTROPOLISHING AND SHAPING OF MICRO-MOULD TOOLS TO REDUCE DEMOULDING DEFECTS. In Proceedings of the Thermal and Fluids Engineering Summer Conference Vol. 2023-March (pp. 1573-1580). |
|
| Dr Aasifa Rounak | |
|
Ambrozkiewicz, B., & Rounak, A. (n.d.). ENERGY HARVESTING – NEW GREEN ENERGY. Politechnika Lubelska. doi:10.35784/jteme.3054 |
|
| Dr Usman Ali | |
|
Sood, D., Alhindawi, I., Ali, U., Finn, D., McGrath, J. A., Byrne, M. A., & O'Donnell, J. (2023). Zone-wise occupancy schedules developed using Time Use Survey data for building energy performance simulations. Data in Brief, 49. doi:10.1016/j.dib.2023.109453 |
|
| Dr Nicolas Aristokleous | |
|
Hadjicharalambous, M., Ioannou, E., Aristokleous, N., Gazeli, K., Anastassiou, C., & Vavourakis, V. (2022). Combined anti-angiogenic and cytotoxic treatment of a solid tumour: in silico investigation of a xenograft animal model's digital twin. Journal of Theoretical Biology, 553. doi:10.1016/j.jtbi.2022.111246 |
|
| Dr Adam Boyce | |
|
Boyce, A. M., Lu, X., Brett, D. J. L., & Shearing, P. R. (2022). Exploring the influence of porosity and thickness on lithium-ion battery electrodes using an image-based model. Journal of Power Sources, 542. doi:10.1016/j.jpowsour.2022.231779 |
|
|
Brosa Planella, F., Ai, W., Boyce, A. M., Ghosh, A., Korotkin, I., Sahu, S., et al. (2022). A continuum of physics-based lithium-ion battery models reviewed. Progress in Energy, 4(4). doi:10.1088/2516-1083/ac7d31 |
|
|
Vadhva, P., Boyce, A. M., Hales, A., Pang, M. C., Patel, A. N., Shearing, P. R., et al. (2022). Towards Optimised Cell Design of Thin Film Silicon-Based Solid-State Batteries via Modelling and Experimental Characterisation. Journal of the Electrochemical Society, 169(10). doi:10.1149/1945-7111/ac9552 |
|
|
Grant, P. S., Greenwood, D., Pardikar, K., Smith, R., Entwistle, T., Middlemiss, L. A., et al. (2022). Roadmap on Li-ion battery manufacturing research. JPhys Energy, 4(4). doi:10.1088/2515-7655/ac8e30 |
|
|
Bailey, J. J., Wade, A., Boyce, A. M., Zhang, Y. S., Brett, D. J. L., & Shearing, P. R. (2023). Quantitative assessment of machine-learning segmentation of battery electrode materials for active material quantification. Journal of Power Sources, 557. doi:10.1016/j.jpowsour.2022.232503 |
|
|
Ge, R., Boyce, A. M., Shui Zhang, Y., Shearing, P. R., Cumming, D. J., & Smith, R. M. (2023). Discrete element method and electrochemical modelling of lithium ion cathode structures characterised by X-ray computed tomography. Chemical Engineering Journal, 465. doi:10.1016/j.cej.2023.142749 |
|
|
Ge, R., Boyce, A. M., Sun, Y., Shearing, P. R., Grant, P. S., Cumming, D. J., & Smith, R. M. (2023). Numerical Design of Microporous Carbon Binder Domains Phase in Composite Cathodes for Lithium-Ion Batteries. ACS Applied Materials and Interfaces, 15(23), 27809-27820. doi:10.1021/acsami.3c00998 |
|
| Professor David Browne | |
|
Murphy, A. G., Norman, A., Meagher, P., & Browne, D. J. (2022). Wear of Bulk Metallic Glass Alloys for Space Mechanism Applications. Journal of Tribology, 144(9). doi:10.1115/1.4054146 |
|
|
Dreelan, D., Ivankovic, A., & Browne, D. J. (2022). Verification of a new cellular automata model of solidification using a case study on the columnar to equiaxed transition previously simulated using front tracking. Computational Materials Science, 215. doi:10.1016/j.commatsci.2022.111773 |
|
|
Murphy, A. G., Meagher, P., Norman, A., & Browne, D. J. (2022). Mechanical and thermal stability of Bulk Metallic Glass alloys identified as candidates for space mechanism applications. Materials and Design, 224. doi:10.1016/j.matdes.2022.111350 |
|
|
Dreelan, D., Ivankovic, A., & Browne, D. J. (2023). Grain structure predictions for metallic additive manufacturing processes. IOP Conference Series: Materials Science and Engineering, 1274(1), 012013. doi:10.1088/1757-899x/1274/1/012013 |
|
|
Bagasol, A. J. I., Kaschel, F. R., Ramachandran, S., Mirihanage, W., Browne, D. J., & Dowling, D. P. (2023). The influence of a large build area on the microstructure and mechanical properties of PBF-LB Ti-6Al-4 V alloy. International Journal of Advanced Manufacturing Technology, 125(3-4), 1355-1369. doi:10.1007/s00170-022-10671-9 |
|
|
Révész, Á., Arjmandabasi, T., Schafler, E., Browne, D. J., & Kovács, Z. (2023). Comprehensive thermal analysis of a high stability Cu–Zr–Al bulk metallic glass subjected to high-pressure torsion. Journal of Thermal Analysis and Calorimetry, 148(6), 2323-2334. doi:10.1007/s10973-022-11875-7 |
|
|
Browne, D. J., & McCartney, D. G. (2023). John David Hunt. 12 December 1936—8 December 2012. Biographical Memoirs of Fellows of the Royal Society, 75, 239-261. doi:10.1098/rsbm.2022.0046 |
|
|
Yang, L., Ramachandran, S., Bagasol, A., Guan, Q., Wang, W., Browne, D. J., et al. (2023). Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion. Scripta Materialia, 231. doi:10.1016/j.scriptamat.2023.115430 |
|
| Assoc Professor Philip Cardiff | |
|
Bali, S., Tukovic, Ž., Cardiff, P., Ivankovic, A., & Pakrashi, V. (2022). A cell-centered finite volume formulation of geometrically exact Simo–Reissner beams with arbitrary initial curvatures. International Journal for Numerical Methods in Engineering, 123(17), 3950-3973. doi:10.1002/nme.6994 |
|
|
Oliveira, I. L., Cardiff, P., Baccin, C. E., & Gasche, J. L. (2022). A numerical investigation of the mechanics of intracranial aneurysms walls: Assessing the influence of tissue hyperelastic laws and heterogeneous properties on the stress and stretch fields. Journal of the Mechanical Behavior of Biomedical Materials, 136. doi:10.1016/j.jmbbm.2022.105498 |
|
|
RODRIGUEZ LUZARDO, S. A., & Cardiff, P. (n.d.). A General Approach for Running Python Codes in OpenFOAM Using an Embedded PYBIND11 Python Interpreter. OpenFOAM® Journal, 2, 166-182. doi:10.51560/ofj.v2.79 |
|
|
Zhang, Y., Sweeney, C., Cardiff, P., Cahill, F., & Keenahan, J. (2023). Quantifying the impact of bridge geometry and surrounding terrain: Wind effects on bridges. Proceedings of the Institution of Civil Engineers: Bridge Engineering. doi:10.1680/jbren.23.00005 |
|
|
Flint, T. F., Robson, J. D., Parivendhan, G., & Cardiff, P. (2023). laserbeamFoam: Laser ray-tracing and thermally induced state transition simulation toolkit. SoftwareX, 21. doi:10.1016/j.softx.2022.101299 |
|
|
Tandis, E., & Cardiff, P. (2023). Finite volume-based supervised machine learning models for linear elastostatics. Advances in Engineering Software, 176. doi:10.1016/j.advengsoft.2022.103390 |
|
|
Parivendhan, G., Cardiff, P., Flint, T., Tukovic, Ž., Obeidi, M., Brabazon, D., & Ivankovic, A. (2023). A numerical study of processing parameters and their effect on the melt-track profile in Laser Powder Bed Fusion processes. Additive Manufacturing, 67. doi:10.1016/j.addma.2023.103482 |
|
|
?tefanov, T., Ryan, B., Javaid, U., Cardiff, P., Ivankovic, A., & Murphy, N. (2023). Fracture toughness of composite-to-composite joints of an elastomer-toughened ethyl cyanoacrylate adhesive for real-time aged batches and an accelerated aged adhesive batch. Thin-Walled Structures, 188. doi:10.1016/j.tws.2023.110808 |
|
| Dr Marco Castelli | |
|
Wang, P., Castelli, M., & Fang, F. (2023). Mechanism of photo-assisted atomic layer etching of chlorinated Si(111) surfaces: Insights from DFT/TDDFT calculations. Materials Science in Semiconductor Processing, 153. doi:10.1016/j.mssp.2022.107169 |
|
|
Geng, Z., Huang, N., Castelli, M., & Fang, F. (2023). Polishing Approaches at Atomic and Close-to-Atomic Scale. Micromachines, 14(2). doi:10.3390/mi14020343 |
|
| Dr Mert Celikin | |
|
Naab, B., & Celikin, M. (2022). The role of microstructural evolution on the fatigue behavior of additively manufactured Ti–6Al–4V alloy. Materials Science and Engineering: A, 859. doi:10.1016/j.msea.2022.144232 |
|
|
Wiese, B., Celikin, M., & Mendis, C. L. (2023). Relationships between Processing and Properties of Magnesium-Based Alloys. Crystals, 13(6). doi:10.3390/cryst13060882 |
|
| Professor Denis Dowling | |
|
Law, V. J., & Dowling, D. P. (2023). Microwave-Assisted Au and Ag Nanoparticle Synthesis: An Energy Phase-Space Projection Analysis. American Journal of Analytical Chemistry, 14(04), 149-174. doi:10.4236/ajac.2023.144009 |
|
|
Law, V. J., & Dowling, D. P. (2023). Revisiting “Non-Thermal” Batch Microwave Oven Inactivation of Microorganisms. American Journal of Analytical Chemistry, 14(01), 28-54. doi:10.4236/ajac.2023.141003 |
|
|
Gorman, L., Dickson, A. N., Monaghan, M., Vaughan, F., Murphy, B., Dowling, D. P., . . . Jones, J. F. X. (n.d.). Novel co-axial, disposable, low-cost 3D printed videolaryngoscopes for patients with COVID-19: a manikin study. European Journal of Anaesthesiology Intensive Care, 2(1), e0015. doi:10.1097/ea9.0000000000000015 |
|
|
Bagasol, A. J. I., Kaschel, F. R., Ramachandran, S., Mirihanage, W., Browne, D. J., & Dowling, D. P. (2023). The influence of a large build area on the microstructure and mechanical properties of PBF-LB Ti-6Al-4 V alloy. International Journal of Advanced Manufacturing Technology, 125(3-4), 1355-1369. doi:10.1007/s00170-022-10671-9 |
|
|
Khan, Z., Long, X., Casey, E., Dowling, D., & Ferguson, S. (2023). Development of continuous spatially distributed diafiltration unit operations. Reaction Chemistry and Engineering, 8(7), 1785-1798. doi:10.1039/d3re00013c |
|
|
Yang, L., Ramachandran, S., Bagasol, A., Guan, Q., Wang, W., Browne, D. J., et al. (2023). Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion. Scripta Materialia, 231. doi:10.1016/j.scriptamat.2023.115430 |
|
| Professor Fengzhou Fang | |
|
Li, Q., & Fang, F. (2022). Contribution of the retinal contour to the peripheral optics of human eye. Vision Research, 198. doi:10.1016/j.visres.2022.108055 |
|
|
Xue, Z. F., Lai, M., Xu, F. F., & Fang, F. Z. (2022). Molecular dynamics study on surface formation and phase transformation in nanometric cutting of ß-Sn. Advances in Manufacturing, 10(3), 356-367. doi:10.1007/s40436-022-00399-w |
|
|
Wang, J., Fang, F., & Li, L. (2022). Cutting of Graphite at Atomic and Close-to-Atomic Scale Using Flexible Enhanced Molecular Dynamics. Nanomanufacturing and Metrology, 5(3), 240-249. doi:10.1007/s41871-022-00128-8 |
|
|
Wang, P., & Fang, F. (2022). Real-time time-dependent DFT study of laser-enhanced atomic layer etching of silicon for damage-free nanostructure fabrication. Journal of Applied Physics, 132(14). doi:10.1063/5.0109818 |
|
|
Wu, S., Wang, J., & Fang, F. (2022). Effect of sidewall roughness on the diffraction efficiency of EUV high aspect ratio freestanding transmission gratings. Optics Express, 30(22), 40413-40424. doi:10.1364/OE.473602 |
|
|
Zhou, Y., Zhang, J., & Fang, F. (2022). Design of the varifocal and multifocal optical near-eye see-through display. Optik, 270. doi:10.1016/j.ijleo.2022.169942 |
|
|
Musgrave, C., O’Toole, L., Mao, T., Li, Q., Lai, M., & Fang, F. (2022). Manufacturing of Soft Contact Lenses Using Reusable and Reliable Cyclic Olefin Copolymer Moulds. Polymers, 14(21). doi:10.3390/polym14214681 |
|
|
Zhou, Y., Zhang, J., & Fang, F. (2022). Design of a dual-focal geometrical waveguide near-eye see-through display. Optics and Laser Technology, 156. doi:10.1016/j.optlastec.2022.108546 |
|
|
McCormack, M., Fang, F., & Zhang, J. (2022). Numerical Analysis of Microchannels Designed for Heat Sinks. Nanomanufacturing and Metrology, 5(4), 354-369. doi:10.1007/s41871-021-00118-2 |
|
|
Wang, J., & Fang, F. (2023). Controllable removal of silicon carbide at nano scale by ion-implantation assisted laser machining. CIRP Annals, 72(1), 181-184. doi:10.1016/j.cirp.2023.03.008 |
|
|
Shen, M., & Fang, F. (2023). Advances in polishing of internal structures on parts made by laser-based powder bed fusion. Frontiers of Mechanical Engineering, 18(1). doi:10.1007/s11465-022-0724-0 |
|
|
Hou, G., & Fang, F. (2023). Detection of Diabetic Fundus Disease Based on Deep Learning. Laser and Optoelectronics Progress, 60(2). doi:10.3788/LOP212505 |
|
|
Wang, P., Castelli, M., & Fang, F. (2023). Mechanism of photo-assisted atomic layer etching of chlorinated Si(111) surfaces: Insights from DFT/TDDFT calculations. Materials Science in Semiconductor Processing, 153. doi:10.1016/j.mssp.2022.107169 |
|
|
Zan, S., Liu, G., Liao, Z., Axinte, D., & Fang, F. (2023). Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process – investigation on effect of bimodal microstructure on machining. CIRP Annals, 72(1), 41-44. doi:10.1016/j.cirp.2023.04.042 |
|
|
Fang, C., Fang, F., & Zhang, X. (2023). Research on Geometric Measurement Technology of the Inner Cavity of Cylindrical Parts. IEEE Transactions on Industrial Electronics. doi:10.1109/TIE.2023.3288172 |
|
|
Geng, Z., Huang, N., Castelli, M., & Fang, F. (2023). Polishing Approaches at Atomic and Close-to-Atomic Scale. Micromachines, 14(2). doi:10.3390/mi14020343 |
|
|
An, H., Wang, J., & Fang, F. (2023). Removal of SiC at atomic and close-to-atomic scale by nanosecond ultraviolet laser. Optics and Laser Technology, 158. doi:10.1016/j.optlastec.2022.108863 |
|
|
Liu, H., Zhou, Q., Wang, W., Fang, F., & Zhang, J. (2023). Solid-State Nanopore Array: Manufacturing and Applications. Small, 19(6). doi:10.1002/smll.202205680 |
|
|
O'Toole, L., Haridas, R. S., Mishra, R. S., & Fang, F. (2023). Determination of Johnson-Cook plasticity model parameters for CoCrMo alloy. Materials Today Communications, 34. doi:10.1016/j.mtcomm.2022.105128 |
|
|
Yan, N., Liu, X., Li, Z., Fang, F., & Zhang, X. (2023). Study on tool mark-induced performance degradation in optical system: simulation and application of field tracing. Journal of Optics (India), 52(1), 365-375. doi:10.1007/s12596-022-00914-z |
|
|
Wang, J., Fang, F., An, H., Wu, S., Qi, H., Cai, Y., & Guo, G. (2023). Laser machining fundamentals: micro, nano, atomic and close-to-atomic scales. International Journal of Extreme Manufacturing, 5(1). doi:10.1088/2631-7990/acb134 |
|
|
Shen, M., & Fang, F. (2023). Two-step electropolishing of internal surfaces of 316L stainless steel made by laser-based powder bed fusion. Journal of Manufacturing Processes, 89, 298-313. doi:10.1016/j.jmapro.2023.01.052 |
|
|
An, H., Wang, J., & Fang, F. (2023). Study on surface thermal oxidation of silicon carbide irradiated by pulsed laser using reactive molecular dynamics. Journal of Chemical Physics, 158(10). doi:10.1063/5.0137778 |
|
|
Liu, G., & Fang, F. (2023). Precision Molding for Glass Optical Components. Guangxue Xuebao/Acta Optica Sinica, 43(8). doi:10.3788/AOS221906 |
|
|
Zhao, Y., & Fang, F. (2023). Dynamic opto-mechanical eye model with peripheral refractions. Optics Express, 31(8), 12097-12113. doi:10.1364/OE.485252 |
|
|
Bi, G., Li, Y., Lai, M., & Fang, F. (2023). Mechanism of polishing lutetium oxide single crystals with polyhedral diamond abrasive grains based on molecular dynamics simulation. Applied Surface Science, 616. doi:10.1016/j.apsusc.2023.156549 |
|
|
An, H., Wang, J., & Fang, F. (2023). Material removal on silicon towards atomic and close-to-atomic scale by infrared femtosecond laser. Materials Science in Semiconductor Processing, 158. doi:10.1016/j.mssp.2023.107368 |
|
|
Guan, T., Lu, Y., Wang, X., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Scaling up the fabrication of wafer-scale Ni-MoS<inf>2</inf>/WS<inf>2</inf> nanocomposite moulds using novel intermittent ultrasonic-assisted dual-bath micro-electroforming. Ultrasonics Sonochemistry, 95. doi:10.1016/j.ultsonch.2023.106359 |
|
|
An, H., Wang, J., Cui, H., & Fang, F. (2023). Periodic surface structure of 4H-SiC by 46.9 nm laser. Optics Express, 31(10), 15438-15448. doi:10.1364/OE.487761 |
|
|
Guan, T., Zaki, S., Haasbroek, P. D., Mao, T., Yu, R., Fang, F., & Zhang, N. (2023). Precision electroforming of nickel nanocomposite mould for defects-free demoulding in polymer micro replication: Surface properties, performance validation and mould release mechanism. Journal of Manufacturing Processes, 94, 196-213. doi:10.1016/j.jmapro.2023.03.054 |
|
|
Ren, Z., Fang, F., Hou, G., Li, Z., & Niu, R. (2023). Appearance-based gaze estimation with feature fusion of multi-level information elements. Journal of Computational Design and Engineering, 10(3), 1080-1109. doi:10.1093/jcde/qwad038 |
|
|
Yuan, Y., Gu, C., Huang, S., Chen, S., Li, Z., & Fang, F. (2023). Study of the optical force on nano-structured surfaces. Physica Scripta, 98(6). doi:10.1088/1402-4896/accf45 |
|
|
O’Toole, L., & Fang, F. Z. (2023). Optimal tool design in micro-milling of difficult-to-machine materials. Advances in Manufacturing, 11(2), 222-247. doi:10.1007/s40436-022-00418-w |
|
|
Guan, T., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Study on mechanical and tribological properties of electroformed nickel composite mould co-deposited with nano-sized PTFE particles. Journal of Materials Research and Technology, 25, 3688-3703. doi:10.1016/j.jmrt.2023.06.188 |
|
|
Wang, P., & Fang, F. (2023). Ab initio simulations of ultrashort laser pulse interaction with Cl-Si(100): implications for atomic layer etching. Physical Chemistry Chemical Physics, 25(31), 20871-20879. doi:10.1039/d3cp02388e |
|
|
Hu, X., Li, Z., Miao, L., Fang, F., Jiang, Z., & Zhang, X. (2023). Measurement Technologies of Light Field Camera: An Overview. Sensors, 23(15). doi:10.3390/s23156812 |
|
|
Lu, S., Zhu, H., Song, L., Zheng, Y., & Fang, F. (2023). Vision-Based Contact Adhesion Measurement Method on Soft Matter Surfaces. Langmuir, 39(30), 10432-10444. doi:10.1021/acs.langmuir.3c00796 |
|
|
Zhang, J., Zhou, Y., & Fang, F. (2023). Depth error correction for plenoptic cameras based on an innovative AR system combining geometrical waveguide and micro-lens array. Optics and Lasers in Engineering, 167. doi:10.1016/j.optlaseng.2023.107629 |
|
|
Lyu, P., Lai, M., Liu, Z., & Fang, F. (2023). Atomic and close-to-atomic scale polishing of Lu<inf>2</inf>O<inf>3</inf> by plasma-assisted etching. International Journal of Mechanical Sciences, 252. doi:10.1016/j.ijmecsci.2023.108374 |
|
|
Gu, C., Huang, S., & Fang, F. (2023). Optimized design and experimental study of a macroscopic mirror to achieve linear amplification of optical force-induced displacement. Optics Express, 31(18), 28830-28849. doi:10.1364/OE.496374 |
|
| Professor Donal Finn | |
|
Li, R., Satchwell, A. J., Finn, D., Christensen, T. H., Kummert, M., Le Dréau, J., et al. (2022). Ten questions concerning energy flexibility in buildings. Building and Environment, 223. doi:10.1016/j.buildenv.2022.109461 |
|
|
Saffari, M., Roe, C., & Finn, D. P. (2022). Improving the building energy flexibility using PCM-enhanced envelopes. Applied Thermal Engineering, 217. doi:10.1016/j.applthermaleng.2022.119092 |
|
|
Li, H., Johra, H., de Andrade Pereira, F., Hong, T., Le Dréau, J., Maturo, A., et al. (2023). Data-driven key performance indicators and datasets for building energy flexibility: A review and perspectives. Applied Energy, 343. doi:10.1016/j.apenergy.2023.121217 |
|
|
Sood, D., Alhindawi, I., Ali, U., Finn, D., McGrath, J. A., Byrne, M. A., & O'Donnell, J. (2023). Zone-wise occupancy schedules developed using Time Use Survey data for building energy performance simulations. Data in Brief, 49. doi:10.1016/j.dib.2023.109453 |
|
| Dr Fiona Freeman | |
|
Burdis, R., Chariyev-Prinz, F., Browe, D. C., Freeman, F. E., Nulty, J., McDonnell, E. E., et al. (2022). Spatial patterning of phenotypically distinct microtissues to engineer osteochondral grafts for biological joint resurfacing. Biomaterials, 289. doi:10.1016/j.biomaterials.2022.121750 |
|
|
Eichholz, K. F., Freeman, F. E., Pitacco, P., Nulty, J., Ahern, D., Burdis, R., et al. (2022). Scaffold microarchitecture regulates angiogenesis and the regeneration of large bone defects. Biofabrication, 14(4). doi:10.1088/1758-5090/ac88a1 |
|
|
Browe, D. C., Burdis, R., Díaz-Payno, P. J., Freeman, F. E., Nulty, J. M., Buckley, C. T., et al. (2022). Promoting endogenous articular cartilage regeneration using extracellular matrix scaffolds. Materials Today Bio, 16. doi:10.1016/j.mtbio.2022.100343 |
|
|
Freeman, F. E., Dosta, P., Shanley, L. C., Ramirez Tamez, N., Riojas Javelly, C. J., Mahon, O. R., et al. (2023). Localized Nanoparticle-Mediated Delivery of miR-29b Normalizes the Dysregulation of Bone Homeostasis Caused by Osteosarcoma whilst Simultaneously Inhibiting Tumor Growth. Advanced Materials, 35(23). doi:10.1002/adma.202207877 |
|
| Dr Pezhman Ghadimi | |
|
Wang, C., Sun, W., Lim, M. K., Hu, X., Gao, Y., & Ghadimi, P. (2022). Structural evolution of global plastic life cycle trade: A multilayer network perspective. Sustainable Production and Consumption, 33, 1031-1042. doi:10.1016/j.spc.2022.08.027 |
|
|
Bai, X., Hu, X., Wang, C., Lim, M. K., Vilela, A. L. M., Ghadimi, P., et al. (2022). Most influential countries in the international medical device trade: Network-based analysis. Physica A: Statistical Mechanics and its Applications, 604. doi:10.1016/j.physa.2022.127889 |
|
|
Mu, D., Ren, H., Wang, C., Yue, X., Du, J., & Ghadimi, P. (2023). Structural characteristics and disruption ripple effect in a meso-level electric vehicle Lithium-ion battery supply chain network. Resources Policy, 80. doi:10.1016/j.resourpol.2022.103225 |
|
|
Li, X., Du, J., Liu, P., Wang, C., Hu, X., & Ghadimi, P. (2023). Optimal choice of power battery joint recycling strategy for electric vehicle manufacturers under a deposit-refund system. International Journal of Production Research, 61(21), 7281-7301. doi:10.1080/00207543.2022.2148009 |
|
|
Yue, X., Mu, D., Wang, C., Ren, H., & Ghadimi, P. (2023). Topological structure and COVID-19 related risk propagation in TFT-LCD supply networks. International Journal of Production Research, 61(8), 2758-2778. doi:10.1080/00207543.2022.2027039 |
|
|
Yue, X., Mu, D., Wang, C., Ren, H., Du, J., & Ghadimi, P. (2023). Disruption risks to Chinese overseas flat panel display supply networks under China’s zero-COVID policy. Operations Management Research. doi:10.1007/s12063-023-00399-4 |
|
|
Sar, K., & Ghadimi, P. (2023). A systematic literature review of the vehicle routing problem in reverse logistics operations. Computers and Industrial Engineering, 177. doi:10.1016/j.cie.2023.109011 |
|
|
Hu, X., Wang, C., Lim, M. K., Chen, W. Q., Teng, L., Wang, P., et al. (2023). Critical systemic risk sources in global lithium-ion battery supply networks: Static and dynamic network perspectives. Renewable and Sustainable Energy Reviews, 173. doi:10.1016/j.rser.2022.113083 |
|
|
Wang, C., Sun, Y., Lim, M. K., Ghadimi, P., & Azadnia, A. H. (2023). An analysis of barriers for successful implementation of municipal solid waste management in Beijing: an integrated DEMATEL-MMDE-ISM approach. Industrial Management and Data Systems, 123(3), 931-966. doi:10.1108/IMDS-08-2022-0464 |
|
| Professor Michael Gilchrist | |
|
Ji, S., Ghajari, M., Mao, H., Kraft, R. H., Hajiaghamemar, M., Panzer, M. B., et al. (2022). Use of Brain Biomechanical Models for Monitoring Impact Exposure in Contact Sports. Annals of Biomedical Engineering, 50(11), 1389-1408. doi:10.1007/s10439-022-02999-w |
|
|
Hoshizaki, T., Post, A. M., Zerpa, C. E., Legace, E., Hoshizaki, T. B., & Gilchrist, M. D. (2022). Evaluation of two rotational helmet technologies to decrease peak rotational acceleration in cycling helmets. Scientific Reports, 12(1). doi:10.1038/s41598-022-11559-0 |
|
|
Ignacy, T., Post, A., Gardner, A. J., Gilchrist, M. D., & Hoshizaki, T. B. (2022). Comparison of dynamic response and maximum principal strain of diagnosed concussion in professional men’s rugby league. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 236(4), 266-276. doi:10.1177/17543371211016596 |
|
|
Zhou, Y., Wang, X., Li, Y., Wang, W., Gilchrist, M. D., & Zhang, N. (2022). Toward the Scalable Fabrication of Fully Bio-Based Antimicrobial and UVB-Blocking Transparent Polylactic Acid Films That Incorporate Natural Coatings and Nanopatterns. ACS Applied Materials and Interfaces, 14(48), 54338-54348. doi:10.1021/acsami.2c15416 |
|
|
Chen, W., Post, A., Karton, C., Gilchrist, M. D., Robidoux, M., & Hoshizaki, T. B. (2023). A comparison of frequency and magnitude of head impacts between Pee Wee And Bantam youth ice hockey. Sports Biomechanics, 22(6), 728-751. doi:10.1080/14763141.2020.1754450 |
|
|
Wang, X., Liu, J., Zhang, Y., Kristiansen, P. M., Islam, A., Gilchrist, M., & Zhang, N. (2023). Advances in precision microfabrication through digital light processing: system development, material and applications. Virtual and Physical Prototyping, 18(1). doi:10.1080/17452759.2023.2248101 |
|
|
Butterfield, J., Post, A., Karton, C., Robidoux, M. A., Gilchrist, M., & Hoshizaki, T. B. (2023). A video analysis examination of the frequency and type of head impacts for player positions in youth ice hockey and FE estimation of their impact severity. Sports Biomechanics. doi:10.1080/14763141.2023.2186941 |
|
|
Clark, J. M., Adanty, K., Post, A., Hoshizaki, T. B., Clissold, J., McGoldrick, A., et al. (2023). Corrigendum to “Proposed Injury Thresholds for Concussion in Equestrian Sports [Journal of Science and Medicine in Sport. Volume 23, Issue 3, March 2020, Pages 222-236]” (Journal of Science and Medicine in Sport (2020) 23(3) (222–236), (S1440244019306280), (10.1016/j.jsams.2019.10.006)). Journal of Science and Medicine in Sport, 26(1), 77. doi:10.1016/j.jsams.2022.12.008 |
|
|
Connor, T. A., Colgan, N., Stewart, M., Ní Annaidh, A., & Gilchrist, M. D. (2023). Inertial properties of a living population for the development of biofidelic headforms. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 237(1), 52-62. doi:10.1177/1754337120921646 |
|
|
Guan, T., Lu, Y., Wang, X., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Scaling up the fabrication of wafer-scale Ni-MoS<inf>2</inf>/WS<inf>2</inf> nanocomposite moulds using novel intermittent ultrasonic-assisted dual-bath micro-electroforming. Ultrasonics Sonochemistry, 95. doi:10.1016/j.ultsonch.2023.106359 |
|
|
Evangelista, I., Wencel, D., Beguin, S., Zhang, N., & Gilchrist, M. D. (2023). Influence of Surface Texturing on the Dry Tribological Properties of Polymers in Medical Devices. Polymers, 15(13). doi:10.3390/polym15132858 |
|
|
Guan, T., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Study on mechanical and tribological properties of electroformed nickel composite mould co-deposited with nano-sized PTFE particles. Journal of Materials Research and Technology, 25, 3688-3703. doi:10.1016/j.jmrt.2023.06.188 |
|
|
Jagannath, A., Li, Y., Cong, H., Hassan, J., Gonzalez, G., Wang, W., et al. (2023). UV-Assisted Hyperbranched Poly(ß-amino ester) Modification of a Silica Membrane for Two-Step Microfluidic DNA Extraction from Blood. ACS Applied Materials and Interfaces, 15(26), 31159-31172. doi:10.1021/acsami.3c03523 |
|
| Professor Lizbeth Goodman | |
See, Z. S., Ledger, S., Goodman, L., Matthews, B., Jones, D., Fealy, S., et al. (2023). PLAYABLE EXPERIENCES THROUGH TECHNOLOGIES: OPPORTUNITIES AND CHALLENGES FOR TEACHING SIMULATION LEARNING AND EXTENDED REALITY SOLUTION CREATION. Journal of Information Technology Education: Innovations in Practice, 22, 67-90. doi:10.28945/5121
Zhang, B., Goodman, L., & Gu, X. (2023). Telecollaboration Tool Preferences for Online Intercultural Learning in Higher Education: Perspectives of Chinese International Students. SAGE Open, 13(2). doi:10.1177/21582440231180087
Hoare, C., Aghamolaei, R., Lynch, M., Gaur, A., & O'Donnell, J. (2022). A linked data approach to multi-scale energy modelling. Advanced Engineering Informatics, 54. doi:10.1016/j.aei.2022.101719
Hu, S., Wang, P., Hoare, C., & O'Donnell, J. (2023). Building Occupancy Detection and Localization Using CCTV Camera and Deep Learning. IEEE Internet of Things Journal, 10(1), 597-608. doi:10.1109/JIOT.2022.3201877
Nace, S., Tiernan, J., Ní Annaidh, A., & Holland, D. (2023). Development and evaluation of a facile mesh-to-surface tool for customised wheelchair cushions.. 3D printing in medicine, 9(1), 3. doi:10.1186/s41205-022-00165-5
Dreelan, D., Ivankovic, A., & Browne, D. J. (2022). Verification of a new cellular automata model of solidification using a case study on the columnar to equiaxed transition previously simulated using front tracking. Computational Materials Science, 215. doi:10.1016/j.commatsci.2022.111773
Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., & Scarselli, G. (2022). Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites, 43(12), 9179-9192. doi:10.1002/pc.27095
Rizzo, G., Saitta, L., Dattilo, S., Tosto, C., Pergolizzi, E., Ivankovic, A., & Cicala, G. (2023). Thermomechanical Characterization of an Unsaturated Polyester Vitrimer Synthesized Using a Titanium Transesterification Catalyst. ACS Applied Polymer Materials. doi:10.1021/acsapm.3c01489
Scarselli, G., Quan, D., Prasad, V., Rao, P. S., Hardiman, M., Reid, I., et al. (2023). Mode I fracture toughness of glass fibre reinforced thermoplastic composites after UV and atmospheric plasma treatments. Composites Science and Technology, 236. doi:10.1016/j.compscitech.2023.109982
Keogh, C. (n.d.). Minimum Functional Innovation Framework (MVI Framework). doi:10.32388/bpl247.2
Keogh, C. (n.d.). Minimum Functional Product (MFP). doi:10.32388/ahse9u
Keogh, C. (n.d.). Minimum Viable Innovation Framework (MVI Framework). doi:10.32388/bpl247
Keogh, C. (n.d.). Minimum Viable Design (MVD). doi:10.32388/6c9z9c
Keogh, C. (n.d.). Minimum Viable Concept (MVC). doi:10.32388/2vs53k
Keogh, C. (n.d.). Minimum Innovation Framework (MIF). doi:10.32388/7rls16
Keogh, C. (n.d.). Minimum Viable Innovation Framework (MVI Framework). doi:10.32388/0jmapn
Keogh, C. (n.d.). Minimum Functional Innovation Framework (MFI Framework). doi:10.32388/bpl247.3
Keogh, C. (n.d.). Minimum Viable Product (MVP). doi:10.32388/bzygt9
Keogh, C. (n.d.). Minimum Functional Design (MFD). doi:10.32388/ic7437
Keogh, C. (n.d.). Minimum Functional Concept (MFC). doi:10.32388/tbnblr
Keogh, C. (n.d.). Minimum Innovation Framework (MIF). doi:10.32388/7rls16.2
Kho, A. S. K., Ooi, E. H., Foo, J. J., & Ooi, E. T. (2022). The effects of vaporisation, condensation and diffusion of water inside the tissue during saline-infused radiofrequency ablation of the liver: A computational study. International Journal of Heat and Mass Transfer, 194. doi:10.1016/j.ijheatmasstransfer.2022.123062
Yip, W. P., Kho, A. S. K., Ooi, E. H., & Ooi, E. T. (2023). An in silico assessment on the potential of using saline infusion to overcome non-confluent coagulation zone during two-probe, no-touch bipolar radiofrequency ablation of liver cancer. Medical Engineering and Physics, 112. doi:10.1016/j.medengphy.2023.103950
MacManus, D. B. (2023). Excision of whole intact mouse brain. MethodsX, 10. doi:10.1016/j.mex.2023.102246
Mondal, S., MacManus, D. B., Bonatti, A. F., De Maria, C., Dalgarno, K., Chatzinikolaidou, M., et al. (2023). A computational analysis of a novel therapeutic approach combining an advanced medicinal therapeutic device and a fracture fixation assembly for the treatment of osteoporotic fractures: Effects of physiological loading, interface conditions, and fracture fixation materials. Medical Engineering and Physics, 114. doi:10.1016/j.medengphy.2023.103967
Kontogianni, G. I., Loukelis, K., Bonatti, A. F., Batoni, E., De Maria, C., Naseem, R., et al. (2023). Effect of Uniaxial Compression Frequency on Osteogenic Cell Responses in Dynamic 3D Cultures. Bioengineering, 10(5). doi:10.3390/bioengineering10050532
MacManus, D. B., Khorshidi, M. A., Ghajari, M., & Sedighi, H. M. (2023). Micromechanics in biology and medicine. IET Nanobiotechnology, 17(3), 125-126. doi:10.1049/nbt2.12130
Frantsuzov, R., Mondal, S., Walsh, C. M., Reynolds, J. P., Dooley, D., & MacManus, D. B. (2023). A finite element model of contusion spinal cord injury in rodents. Journal of the Mechanical Behavior of Biomedical Materials, 142. doi:10.1016/j.jmbbm.2023.105856
Black, S., Tzagiollari, A., Mondal, S., Dunne, N., & MacManus, D. B. (2023). Mechanical behaviour of gel-filled additively-manufactured lattice structures under quasi-static compressive loading. Materials Today Communications, 35. doi:10.1016/j.mtcomm.2023.106164
Calcerrada, R., Donoso, A., Aranda, E., McKeown, D. J., & Ramos, F. (2022). Topology optimization of a rowing terminal device for an upper limb prosthesis. Advances in Engineering Software, 173. doi:10.1016/j.advengsoft.2022.103284
Doyle, M., Gloster, A., Griffin, M., Hibbett, M., Kyle, J., O'toole, C., et al. (2023). Design, development and testing of flight software for EIRSAT-1: a university-class CubeSat enabling astronomical research. Journal of Astronomical Telescopes, Instruments, and Systems, 9(1), 17002. doi:10.1117/1.JATIS.9.1.017002
Dunwoody, R., Doyle, M., Murphy, D., Finneran, G., O'callaghan, D., Reilly, J., et al. (2023). Development, description, and validation of the operations manual for EIRSAT-1, a 2U CubeSat with a gamma-ray burst detector. Journal of Astronomical Telescopes, Instruments, and Systems, 9(3). doi:10.1117/1.JATIS.9.3.037001
Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., & Scarselli, G. (2022). Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites, 43(12), 9179-9192. doi:10.1002/pc.27095
Scarselli, G., Quan, D., Prasad, V., Rao, P. S., Hardiman, M., Reid, I., et al. (2023). Mode I fracture toughness of glass fibre reinforced thermoplastic composites after UV and atmospheric plasma treatments. Composites Science and Technology, 236. doi:10.1016/j.compscitech.2023.109982
?tefanov, T., Ryan, B., Javaid, U., Cardiff, P., Ivankovic, A., & Murphy, N. (2023). Fracture toughness of composite-to-composite joints of an elastomer-toughened ethyl cyanoacrylate adhesive for real-time aged batches and an accelerated aged adhesive batch. Thin-Walled Structures, 188. doi:10.1016/j.tws.2023.110808
Nagle, M., Price, S., Trotta, A., Destrade, M., Fop, M., & Ní Annaidh, A. (2023). Analysis of In Vivo Skin Anisotropy Using Elastic Wave Measurements and Bayesian Modelling. Annals of Biomedical Engineering, 51(8), 1781-1794. doi:10.1007/s10439-023-03185-2
Nguyen, D. H., Song, Y., & Smith, J. C. (2023). A two-stage network interdiction-monitoring game. Networks, 81(3), 334-358. doi:10.1002/net.22136
Assoc Professor Aisling Ní Annaidh
Nace, S., Tiernan, J., Ní Annaidh, A., & Holland, D. (2023). Development and evaluation of a facile mesh-to-surface tool for customised wheelchair cushions.. 3D printing in medicine, 9(1), 3. doi:10.1186/s41205-022-00165-5
Connor, T. A., Colgan, N., Stewart, M., Ní Annaidh, A., & Gilchrist, M. D. (2023). Inertial properties of a living population for the development of biofidelic headforms. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 237(1), 52-62. doi:10.1177/1754337120921646
Nagle, M., Price, S., Trotta, A., Destrade, M., Fop, M., & Ní Annaidh, A. (2023). Analysis of In Vivo Skin Anisotropy Using Elastic Wave Measurements and Bayesian Modelling. Annals of Biomedical Engineering, 51(8), 1781-1794. doi:10.1007/s10439-023-03185-2
Dalli, J., Montminy, T., Ferguson, M., Khan, M. F., Nolan, K., & Cahill, R. A. (2022). Impact of intra-abdominal insufflation pressure on gas leakage occurring during laparoscopy. Surgical Endoscopy, 36(9), 7047-7055. doi:10.1007/s00464-022-09242-6
Sotiriou, V., Huang, Y., Ahmed, S., Isaksson, H., & Nowlan, N. C. (2022). Prenatal murine skeletogenesis partially recovers from absent skeletal muscle as development progresses. European cells & materials, 44, 115-132. doi:10.22203/eCM.v044a08
Collins, J. M., Lang, A., Parisi, C., Moharrer, Y., Nijsure, M. P., Kim, J. H. T., et al. (2023). YAP and TAZ couple osteoblast precursor mobilization to angiogenesis and mechanoregulated bone development. doi:10.1101/2023.01.20.524918
Khatib, N. S., Monsen, J., Ahmed, S., Huang, Y., Hoey, D. A., & Nowlan, N. C. (2023). Mechanoregulatory role of TRPV4 in prenatal skeletal development. Science Advances, 9(4). doi:10.1126/sciadv.ade2155
Assoc Professor Eoin O'Cearbhaill
Levey, R. E., Tornifoglio, B., Stone, A. J., Kerskens, C., Robinson, S. T., Coulter, F. B., et al. (2022). Towards a Whole Sample Imaging Approach Using Diffusion Tensor Imaging to Examine the Foreign Body Response to Explanted Medical Devices. Polymers, 14(22). doi:10.3390/polym14224819
Sargioti, N., Levingstone, T. J., O’Cearbhaill, E. D., McCarthy, H. O., & Dunne, N. J. (2023). Metallic Microneedles for Transdermal Drug Delivery: Applications, Fabrication Techniques and the Effect of Geometrical Characteristics. Bioengineering, 10(1). doi:10.3390/bioengineering10010024
Assoc Professor James O'Donnell
Hoare, C., Aghamolaei, R., Lynch, M., Gaur, A., & O'Donnell, J. (2022). A linked data approach to multi-scale energy modelling. Advanced Engineering Informatics, 54. doi:10.1016/j.aei.2022.101719
Hu, S., Wang, P., Hoare, C., & O'Donnell, J. (2023). Building Occupancy Detection and Localization Using CCTV Camera and Deep Learning. IEEE Internet of Things Journal, 10(1), 597-608. doi:10.1109/JIOT.2022.3201877
Shaw, C., de Andrade Pereira, F., McNally, C., Farghaly, K., Hartmann, T., & O'Donnell, J. (2023). Information management in the facilities domain: investigating practitioner priorities. Facilities, 41(5-6), 285-305. doi:10.1108/F-02-2022-0033
Sood, D., Alhindawi, I., Ali, U., Finn, D., McGrath, J. A., Byrne, M. A., & O'Donnell, J. (2023). Zone-wise occupancy schedules developed using Time Use Survey data for building energy performance simulations. Data in Brief, 49. doi:10.1016/j.dib.2023.109453
Kostyunina, D. S., Rowan, S. C., Pakhomov, N. V., Dillon, E., Rochfort, K. D., Cummins, P. M., et al. (2023). Shear Stress Markedly Alters the Proteomic Response to Hypoxia in Human Pulmonary Endothelial Cells. American journal of respiratory cell and molecular biology, 68(5), 551-565. doi:10.1165/rcmb.2022-0340OC
O'Toole, L., Haridas, R. S., Mishra, R. S., & Fang, F. (2023). Determination of Johnson-Cook plasticity model parameters for CoCrMo alloy. Materials Today Communications, 34. doi:10.1016/j.mtcomm.2022.105128
O’Toole, L., & Fang, F. Z. (2023). Optimal tool design in micro-milling of difficult-to-machine materials. Advances in Manufacturing, 11(2), 222-247. doi:10.1007/s40436-022-00418-w
Assoc Professor Vikram Pakrashi
Bali, S., Tukovic, Ž., Cardiff, P., Ivankovic, A., & Pakrashi, V. (2022). A cell-centered finite volume formulation of geometrically exact Simo–Reissner beams with arbitrary initial curvatures. International Journal for Numerical Methods in Engineering, 123(17), 3950-3973. doi:10.1002/nme.6994
González Sopeña, J. M., Pakrashi, V., & Ghosh, B. (2022). A Spiking Neural Network Based Wind Power Forecasting Model for Neuromorphic Devices. Energies, 15(19). doi:10.3390/en15197256
Joseph, G. V., & Pakrashi, V. (2022). Spiking Neural Networks for Structural Health Monitoring. Sensors, 22(23). doi:10.3390/s22239245
Inturi, V., Balaji, S. V., Gyanam, P., Pragada, B. P. V., Geetha Rajasekharan, S., & Pakrashi, V. (2023). An integrated condition monitoring scheme for health state identification of a multi-stage gearbox through Hurst exponent estimates. Structural Health Monitoring, 22(1), 730-745. doi:10.1177/14759217221092828
Panda, S., Gogoi, A., Hazra, B., & Pakrashi, V. (2023). A novel mean square formulation of stochastic nonlinear dynamic systems based on Adomian decomposition. Probabilistic Engineering Mechanics, 71. doi:10.1016/j.probengmech.2022.103404
Shoukat, G., Michel, G., Coughlan, M., Malekjafarian, A., Thusyanthan, I., Desmond, C., & Pakrashi, V. (2023). Generation of Synthetic CPTs with Access to Limited Geotechnical Data for Offshore Sites. Energies, 16(9). doi:10.3390/en16093817
Buckley, T., Ghosh, B., & Pakrashi, V. (2023). A Feature Extraction & Selection Benchmark for Structural Health Monitoring. Structural Health Monitoring, 22(3), 2082-2127. doi:10.1177/14759217221111141
González Sopeña, J. M., Pakrashi, V., & Ghosh, B. (2023). A benchmarking framework for performance evaluation of statistical wind power forecasting models. Sustainable Energy Technologies and Assessments, 57. doi:10.1016/j.seta.2023.103246
Panda, S., Gogoi, A., Hazra, B., & Pakrashi, V. (2023). Geometry preserving Ito-Taylor formulation for stochastic hamiltonian dynamics on manifolds. Applied Mathematical Modelling, 119, 626-647. doi:10.1016/j.apm.2023.03.015
Assoc Professor Nikolaos Papakostas
Mathew, R., McGee, R., Roche, K., Warreth, S., & Papakostas, N. (2022). Introducing Mobile Collaborative Robots into Bioprocessing Environments: Personalised Drug Manufacturing and Environmental Monitoring. Applied Sciences (Switzerland), 12(21). doi:10.3390/app122110895
Papakostas, N., Wang, L., Makris, S., & Mourtzis, D. (2023). Editorial of the Special Issue “Advanced Robotics Applications in Industry”. Applied Sciences (Switzerland), 13(10). doi:10.3390/app13105836
Saitta, L., Prasad, V., Tosto, C., Murphy, N., Ivankovic, A., Cicala, G., & Scarselli, G. (2022). Characterization of biobased epoxy resins to manufacture eco-composites showing recycling properties. Polymer Composites, 43(12), 9179-9192. doi:10.1002/pc.27095
Vijayakumar, A. A., James, N., Prasad, V., Divakaran, M., & Kochunny, M. K. (2023). Tribological and thermogravimetric performance of flax/bamboo hybrid composites for gear applications: Influence of the stacking sequence. Polymer Composites, 44(2), 1038-1053. doi:10.1002/pc.27152
Scarselli, G., Quan, D., Prasad, V., Rao, P. S., Hardiman, M., Reid, I., et al. (2023). Mode I fracture toughness of glass fibre reinforced thermoplastic composites after UV and atmospheric plasma treatments. Composites Science and Technology, 236. doi:10.1016/j.compscitech.2023.109982
Mathew, R., McGee, R., Roche, K., Warreth, S., & Papakostas, N. (2022). Introducing Mobile Collaborative Robots into Bioprocessing Environments: Personalised Drug Manufacturing and Environmental Monitoring. Applied Sciences (Switzerland), 12(21). doi:10.3390/app122110895
Gholamian, E., Mehr, A. S., Yari, M., & Carton, J. G. (2023). Dynamic simulation and techno-economic assessment of hydrogen utilization in dual fuel (Hydrogen/biogas) micro gas turbine systems for a wastewater treatment plant. Process Safety and Environmental Protection, 169, 220-237. doi:10.1016/j.psep.2022.10.045
Mehr, A. S., Ilkhani, M., Sabernia, S., Nooshmand, S., Gholamian, E., & Assareh, E. (2023). Thermodynamics assessment and dynamic simulation of a low-carbon syngas-fueled SOFC system using a green hydrogen blend. International Journal of Hydrogen Energy. doi:10.1016/j.ijhydene.2023.05.128
Javaherian, A., Yari, M., Gholamian, E., Carton, J. G., & Mehr, A. S. (2023). Proposal and comprehensive analysis of power and green hydrogen production using a novel integration of flame-assisted fuel cell system and Vanadium-Chlorine cycle: An application of multi-objective optimization. Energy Conversion and Management, 277. doi:10.1016/j.enconman.2023.116659
Kudra, G., Witkowski, K., Fasihi, A., Wasilewski, G., Seth, S., Polczynski, K., & Awrejcewicz, J. (2023). Bifurcation dynamics of 1DOF parametric oscillator with stiffness-hardening characteristic and dry friction. Journal of Sound and Vibration, 543. doi:10.1016/j.jsv.2022.117356
Njitacke, Z. T., Muni, S. S., Seth, S., Awrejcewicz, J., & Kengne, J. (2023). Complex dynamics of a heterogeneous network of Hindmarsh-Rose neurons. Physica Scripta, 98(4). doi:10.1088/1402-4896/acbdd1
Shen, M., & Fang, F. (2023). Advances in polishing of internal structures on parts made by laser-based powder bed fusion. Frontiers of Mechanical Engineering, 18(1). doi:10.1007/s11465-022-0724-0
Shen, M., & Fang, F. (2023). Two-step electropolishing of internal surfaces of 316L stainless steel made by laser-based powder bed fusion. Journal of Manufacturing Processes, 89, 298-313. doi:10.1016/j.jmapro.2023.01.052
Mahesh, S., McNabola, A., Smith, W., Timoney, D., Ekhtiari, A., Fowler, B., et al. (2023). On-road remote sensing of vehicles in Dublin: Measurement and emission factor estimation. Transportation Research Part D: Transport and Environment, 117. doi:10.1016/j.trd.2023.103620
Tandis, E., & Cardiff, P. (2023). Finite volume-based supervised machine learning models for linear elastostatics. Advances in Engineering Software, 176. doi:10.1016/j.advengsoft.2022.103390
Tandis, E., & Ashrafizadeh, A. (2023). A unified approach for the solution of fluid-solid interaction problems with hyperelastic deformation in internal flows. International Journal for Numerical Methods in Fluids, 95(4), 603-636. doi:10.1002/fld.5159
Saeed Misaghian, M., Tardioli, G., Cabrera, A. G., Salerno, I., Flynn, D., & Kerrigan, R. (2023). Assessment of Carbon-Aware Flexibility Measures From Data Centres Using Machine Learning. IEEE Transactions on Industry Applications, 59(1), 70-80. doi:10.1109/TIA.2022.3213637
Doyle, M., Gloster, A., Griffin, M., Hibbett, M., Kyle, J., O'toole, C., et al. (2023). Design, development and testing of flight software for EIRSAT-1: a university-class CubeSat enabling astronomical research. Journal of Astronomical Telescopes, Instruments, and Systems, 9(1), 17002. doi:10.1117/1.JATIS.9.1.017002
Dunwoody, R., Doyle, M., Murphy, D., Finneran, G., O'callaghan, D., Reilly, J., et al. (2023). Development, description, and validation of the operations manual for EIRSAT-1, a 2U CubeSat with a gamma-ray burst detector. Journal of Astronomical Telescopes, Instruments, and Systems, 9(3). doi:10.1117/1.JATIS.9.3.037001
Mahesh, S., McNabola, A., Smith, W., Timoney, D., Ekhtiari, A., Fowler, B., et al. (2023). On-road remote sensing of vehicles in Dublin: Measurement and emission factor estimation. Transportation Research Part D: Transport and Environment, 117. doi:10.1016/j.trd.2023.103620
Lee, D., Chan, Y. C., Chen, W., Wang, L., van Beek, A., & Chen, W. (2023). t-METASET: Task-Aware Acquisition of Metamaterial Datasets Through Diversity-Based Active Learning. Journal of Mechanical Design, 145(3). doi:10.1115/1.4055925
van Beek, A., Nevile Karkaria, V., & Chen, W. (2023). Digital twins for the designs of systems: a perspective. Structural and Multidisciplinary Optimization, 66(3). doi:10.1007/s00158-023-03488-x
van Beek, A., Giuntoli, A., Hansoge, N. K., Keten, S., & Chen, W. (2023). Semi-Parametric Functional Calibration Using Uncertainty Quantification Based Decision Support. Journal of Verification, Validation and Uncertainty Quantification, 8(2). doi:10.1115/1.4062694
Varghese, R., Nigesh, S. R. V., Banerjee, S., & Boominathan, A. (2023). The Horizontal Mode Natural Frequency of a Floating Pile in Layered Soil: Full-Scale Field Test Vs Mathematical Models. Indian Geotechnical Journal, 53(4), 717-731. doi:10.1007/s40098-023-00713-8
Kurniawati, I., Beaumont, B., Varghese, R., Kostadinovic, D., Sokol, I., Hemida, H., et al. (2023). Conceptual Design of a Floating Modular Energy Island for Energy Independency: A Case Study in Crete. Energies, 16(16). doi:10.3390/en16165921
Gao, N., Zhou, L., Wang, X., & Chen, G. (2022). Evaluation of Liquid Heat Capacity of Latest Low Global Warming Hydrofluoroolefins (HFOs): A Comparison of a Cubic Equation of State, Fundamental Equations of State, and a Corresponding State Equation. International Journal of Thermophysics, 43(9). doi:10.1007/s10765-022-03062-5
Wang, X., Wright, E., Gao, N., & Li, Y. (2022). Evaluation on Excess Entropy Scaling Method Predicting Thermal Transport Properties of Liquid HFC/HFO Refrigerants. Journal of Thermal Science, 31(5), 1465-1475. doi:10.1007/s11630-020-1383-2
Hao, X., Gao, N., Chen, G., Volovyk, O., Wang, X., & Xuan, Y. (2022). Experimental Investigation of the Ejector Refrigeration Cycle for Cascade System Application. Journal of Thermal Science, 31(5), 1476-1486. doi:10.1007/s11630-020-1367-2
Li, N., Wang, X., Chen, G., & Gao, N. (2022). Linking Thermal Conductivity and Self-Diffusion Coefficient with a Simple Dimensionless Calorimetric Parameter for Saturated Liquids. Industrial and Engineering Chemistry Research, 61(41), 15414-15422. doi:10.1021/acs.iecr.2c02447
Hao, X., Gao, N., Wang, X., Li, N., Chen, G., & Wang, Q. (2023). Thermodynamic investigation on low GWP drop-in alternatives to HFC-245fa in ejector refrigeration cycle for air condition application. Asia-Pacific Journal of Chemical Engineering. doi:10.1002/apj.2948
Bao, K., Wang, X., Zhang, P. E., Han, X., & Tan, J. (2023). Evaporating Temperature Uniformity of the Pulsating Heat Pipe with Surfactant Solutions at Different Concentrations. Journal of Thermal Science, 32(1), 183-191. doi:10.1007/s11630-022-1756-9
Li, Y., Shi, Y., Wang, X., Luo, D., & Yan, Y. (2023). Thermal and electrical contact resistances of thermoelectric generator: Experimental study and artificial neural network modelling. Applied Thermal Engineering, 225. doi:10.1016/j.applthermaleng.2023.120154
Dan, D., Zhao, Y., Wei, M., & Wang, X. (2023). Review of Thermal Management Technology for Electric Vehicles. Energies, 16(12). doi:10.3390/en16124693
Li, Y., Wang, X., Luo, D., Shi, Y., Ren, Y., & Yan, Y. (2023). Recent development in structural designs and thermal enhancement technologies of thermoelectric generator with different types of heat sources: A review. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 4. doi:10.1016/j.prime.2023.100180
Ribeiro, S., Pugliese, E., Korntner, S. H., Fernandes, E. M., Gomes, M. E., Reis, R. L., et al. (2022). Assessing the combined effect of surface topography and substrate rigidity in human bone marrow stem cell cultures. Engineering in Life Sciences, 22(10), 619-633. doi:10.1002/elsc.202200029
Sorushanova, A., Tsiapalis, D., Skoufos, I., Tzora, A., FitzGerald, U., Mullen, A. M., & Zeugolis, D. I. (2022). Tissue origin matters: Maintenance of tenogenic phenotype on the tendon and not skin collagen-derived devices. MedComm – Biomaterials and Applications, 1(2). doi:10.1002/mba2.24
Du, S., Zeugolis, D. I., & O’Brien, T. (2022). Scaffold-based delivery of mesenchymal stromal cells to diabetic wounds. Stem Cell Research and Therapy, 13(1). doi:10.1186/s13287-022-03115-4
Ryan, C. N. M., Pugliese, E., Shologu, N., Gaspar, D., Rooney, P., Islam, M. N., et al. (2023). The synergistic effect of physicochemical in vitro microenvironment modulators in human bone marrow stem cell cultures. Biomaterials Advances, 144. doi:10.1016/j.bioadv.2022.213196
Korntner, S. H., Di Nubila, A., Gaspar, D., & Zeugolis, D. I. (2023). Macromolecular crowding in animal component-free, xeno-free and foetal bovine serum media for human bone marrow mesenchymal stromal cell expansion and differentiation. Frontiers in Bioengineering and Biotechnology, 11. doi:10.3389/fbioe.2023.1136827
Ersanli, C., Tzora, A., Skoufos, I., Fotou, K., Maloupa, E., Grigoriadou, K., et al. (2023). The Assessment of Antimicrobial and Anti-Biofilm Activity of Essential Oils against Staphylococcus aureus Strains. Antibiotics, 12(2). doi:10.3390/antibiotics12020384
Pugliese, E., Sallent, I., Ribeiro, S., Trotier, A., Korntner, S. H., Bayon, Y., & Zeugolis, D. I. (2023). Development of three-layer collagen scaffolds to spatially direct tissue-specific cell differentiation for enthesis repair. Materials Today Bio, 19. doi:10.1016/j.mtbio.2023.100584
Ersanli, C., Tzora, A., Skoufos, I., Voidarou, C., & Zeugolis, D. I. (2023). Recent Advances in Collagen Antimicrobial Biomaterials for Tissue Engineering Applications: A Review. International Journal of Molecular Sciences, 24(9). doi:10.3390/ijms24097808
Zhou, Y., Zhang, J., & Fang, F. (2022). Design of the varifocal and multifocal optical near-eye see-through display. Optik, 270. doi:10.1016/j.ijleo.2022.169942
McCormack, M., Fang, F., & Zhang, J. (2022). Numerical Analysis of Microchannels Designed for Heat Sinks. Nanomanufacturing and Metrology, 5(4), 354-369. doi:10.1007/s41871-021-00118-2
Zhou, Y., Zhang, J., & Fang, F. (2022). Design of a dual-focal geometrical waveguide near-eye see-through display. Optics and Laser Technology, 156. doi:10.1016/j.optlastec.2022.108546
Zhang, J. F., & Ducree, J. (2023). Proposition of atomic and close-to-atomic scale manufacturing. Advances in Manufacturing. doi:10.1007/s40436-023-00442-4
Cui, F., Sun, H., Yang, X., Zhou, H., Wu, Y., Li, J., et al. (2023). Laser-induced graphene (LIG)-based Au@CuO/V<inf>2</inf>CT<inf>x</inf> MXene non-enzymatic electrochemical sensors for the urine glucose test. Chemical Engineering Journal, 457. doi:10.1016/j.cej.2023.141303
Liu, H., Zhou, Q., Wang, W., Fang, F., & Zhang, J. (2023). Solid-State Nanopore Array: Manufacturing and Applications. Small, 19(6). doi:10.1002/smll.202205680
Zhang, J., Zhou, Y., & Fang, F. (2023). Depth error correction for plenoptic cameras based on an innovative AR system combining geometrical waveguide and micro-lens array. Optics and Lasers in Engineering, 167. doi:10.1016/j.optlaseng.2023.107629
Cui, F., Song, Y., Ji, H., Li, M., Zhuang, X., Zeng, C., et al. (2023). GlycoEVLR: Glycosylated extracellular vesicle-like receptors for targeting and sensing viral antigen. Chemical Engineering Journal, 469. doi:10.1016/j.cej.2023.143844
Zhang, H., Liu, H., & Zhang, N. (2022). A Review of Microinjection Moulding of Polymeric Micro Devices. Micromachines, 13(9). doi:10.3390/mi13091530
Zhou, Y., Wang, X., Li, Y., Wang, W., Gilchrist, M. D., & Zhang, N. (2022). Toward the Scalable Fabrication of Fully Bio-Based Antimicrobial and UVB-Blocking Transparent Polylactic Acid Films That Incorporate Natural Coatings and Nanopatterns. ACS Applied Materials and Interfaces, 14(48), 54338-54348. doi:10.1021/acsami.2c15416
Wang, X., Liu, J., Zhang, Y., Kristiansen, P. M., Islam, A., Gilchrist, M., & Zhang, N. (2023). Advances in precision microfabrication through digital light processing: system development, material and applications. Virtual and Physical Prototyping, 18(1). doi:10.1080/17452759.2023.2248101
Wang, X., Zhou, Y., Johnson, M., Milne, C., Sigen, A., Li, Y., et al. (2023). A Novel Hydrophilic, Antibacterial Chitosan-Based Coating Prepared by Ultrasonic Atomization Assisted LbL Assembly Technique. Journal of Functional Biomaterials, 14(1). doi:10.3390/jfb14010043
Guan, T., Lu, Y., Wang, X., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Scaling up the fabrication of wafer-scale Ni-MoS<inf>2</inf>/WS<inf>2</inf> nanocomposite moulds using novel intermittent ultrasonic-assisted dual-bath micro-electroforming. Ultrasonics Sonochemistry, 95. doi:10.1016/j.ultsonch.2023.106359
Guan, T., Zaki, S., Haasbroek, P. D., Mao, T., Yu, R., Fang, F., & Zhang, N. (2023). Precision electroforming of nickel nanocomposite mould for defects-free demoulding in polymer micro replication: Surface properties, performance validation and mould release mechanism. Journal of Manufacturing Processes, 94, 196-213. doi:10.1016/j.jmapro.2023.03.054
Evangelista, I., Wencel, D., Beguin, S., Zhang, N., & Gilchrist, M. D. (2023). Influence of Surface Texturing on the Dry Tribological Properties of Polymers in Medical Devices. Polymers, 15(13). doi:10.3390/polym15132858
Bei, Y., He, J., Dong, X., Wang, Y., Wang, S., Guo, W., et al. (2023). Targeting CD44 Variant 5 with an Antibody–Drug Conjugate Is an Effective Therapeutic Strategy for Intrahepatic Cholangiocarcinoma. Cancer Research, 83(14), 2405-2420. doi:10.1158/0008-5472.CAN-23-0510
Guan, T., Gilchrist, M. D., Fang, F., & Zhang, N. (2023). Study on mechanical and tribological properties of electroformed nickel composite mould co-deposited with nano-sized PTFE particles. Journal of Materials Research and Technology, 25, 3688-3703. doi:10.1016/j.jmrt.2023.06.188
Sun, L., Yang, N., Chen, B., Bei, Y., Kang, Z., Zhang, C., et al. (2023). A novel mesenchymal stem cell-based regimen for acute myeloid leukemia differentiation therapy. Acta Pharmaceutica Sinica B, 13(7), 3027-3042. doi:10.1016/j.apsb.2023.05.007
Jagannath, A., Li, Y., Cong, H., Hassan, J., Gonzalez, G., Wang, W., et al. (2023). UV-Assisted Hyperbranched Poly(ß-amino ester) Modification of a Silica Membrane for Two-Step Microfluidic DNA Extraction from Blood. ACS Applied Materials and Interfaces, 15(26), 31159-31172. doi:10.1021/acsami.3c03523
| Dr Colin Keogh | |
|
Durkin, P., Keogh, C., O'Sullivan, P., Rainbird, J., Trifkovic, K., & Frizzell, R. (2023). The Commercial Pathway Methodology. doi:10.31219/osf.io/675sc |
|
|
Keogh, C. (2023). A Toolkit for the Commercialization of PhD Research: An Entrepreneurial Approach. doi:10.31219/osf.io/ws82q |
|
|
Keogh, C., & McKeown, A. (2023). Hiberno-Celtic Futurism as a nexus for 21 Century sustainable Trans-disciplinary Innovation and Research. doi:10.31219/osf.io/8khs5 |
|
|
Lyons, R., & Keogh, C. (2023). Problem Canvas. doi:10.31219/osf.io/kdzfj |
|
| Dr Kevin Nolan | |
|
Eain, M. M. G., Nolan, K., Murphy, B., McCaul, C., & MacLoughlin, R. (2022). Exhaled Patient Derived Aerosol Dispersion during Awake Tracheal Intubation with Concurrent High Flow Nasal Therapy. doi:10.21203/rs.3.rs-2150508/v1 |
|
| Assoc Professor Eoin O'Cearbhaill | |
|
Kho, A. S. K., Béguin, S., O'Cearbhaill, E., & Ní Annaidh, A. (2023). Mechanical Characterisation of Commercial Artificial Skin Models. doi:10.2139/ssrn.4378258 |
|
| Dr Jufan Zhang | |
|
Zhang, J. (2022). Application of micro/nano manufacturing in development of medical devices. online. |
|
|
Zhang, J. (2022). Development and application of nano manufacturing. online. |
|
|
Zhang, J. (2022). Development and application of ultra-precision machining. UCD, Dublin. |
|
|
Zhang, J. (2023). Invited talk: Fabrication of Large Area Solid-state Nanopore Array. online. |
|
|
Zhang, J. (2023). Manufacturing of Large Area Solid-state Nanopore Array. |
|
|
Zhang, J. (2023). Development of 3D structured microneedle device for transdermal drug delivery. |
|