Deveci, M. (2024). Decision Support Systems for Sustainable Computing. Elsevier.

Dabic-Miletic, S., Jovcic, S., Simic, V., Pamucar, D., Stevic, Ž., Ala, A., & Sitinjak, C. (2024). Digital finance in circular economy using decision support systems. In Decision Support Systems for Sustainable Computing (pp. 205-216). doi:10.1016/B978-0-443-23597-9.00010-X

Zhang, J., Zhou, Y., & Fang, F. (2023). Advancements in Optical See-through Near-Eye Display. In Modern Development and Challenges in Virtual Reality. IntechOpen. doi:10.5772/intechopen.108309

Fang, F., Luo, X., Dai, G., Takaya, Y., Gao, W., & Ehmann, K. (2024). Atomic and Close-to-Atomic Scale Manufacturing: The Fundamental Technology of Manufacturing III. In Lecture Notes in Mechanical Engineering (Vol. Part F2256, pp. 315-360). doi:10.1007/978-3-031-54034-9_9

Cahill, R. A., Dalli, J., Khan, M. F., & Nolan, K. P. (2024). Surgical smoke. In The Technical Principles of Endoscopic Surgery (pp. 207-213). Bohn Stafleu van Loghum. doi:10.1007/978-90-368-2905-2_28

Duncan, S., Bampoulas, A., Hoare, C., Ali, U., O’Donnell, J., & Mangina, E. (2024). A User-Friendly Web-Based Interface for Integrated Life-Cycle Cost Analysis and 3D Asset Visualisation in Real Estate Management. In Unknown Book (Vol. 2102 CCIS, pp. 440-451). doi:10.1007/978-3-031-64359-0_34

Chawla, R., Rounak, A., & Pakrashi, V. (2024). Higher Order Transverse Discontinuity Mapping for Hybrid Dynamical Systems. In NODYCON Conference Proceedings Series (pp. 677-687). Springer Nature Switzerland. doi:10.1007/978-3-031-50631-4_57

Mourtzis, D., Panopoulos, N., Stavropoulos, P., & Papakostas, N. (2024). Artificial Intelligence for Production Management and Control Towards Mass Personalization of Global Networks. In Lecture Notes in Mechanical Engineering (Vol. Part F2256, pp. 267-312). doi:10.1007/978-3-031-54034-9_8

Chawla, R., Rounak, A., & Pakrashi, V. (2024). Higher Order Transverse Discontinuity Mapping for Hybrid Dynamical Systems. In NODYCON Conference Proceedings Series (pp. 677-687). Springer Nature Switzerland. doi:10.1007/978-3-031-50631-4_57

Hinchy, E. P., Cunningham, N., Doohan, A., Hassanpour, M., Nwanji, E., O’Malley, D., et al. (2024). The Development of a Robotic Digital Twin for the Life Science Sector. In Unknown Book (pp. 567-574). doi:10.1007/978-3-031-38241-3_64

Zhang, J., Zhou, Y., & Fang, F. (2023). Advancements in Optical See-through Near-Eye Display. In Modern Development and Challenges in Virtual Reality. IntechOpen. doi:10.5772/intechopen.108309

Ahearne, E., & Donohue, M. (2024). The Effect of Atmospheric Gases on the Fundamental Mechanisms in Grinding. In Procedia CIRP. Hotel Continental Ischia: Elsevier.

Azadi, A., O’Cearbhaill, E. D., & Celikin, M. (2024). The Effect of Powder Size and Morphology on the Sinterability of Bioresorbable Mg-Sr/Ca Alloys. In Minerals, Metals and Materials Series (pp. 205-212). doi:10.1007/978-3-031-50240-8_39

Shen, M., & Fang, F. (2024). Polishing of Ti6Al4V internal structures made by laser-based powder bed fusion. In The 10th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023).

Bergin, C., Finn, D., & Looby, T. (2023). Investigation of High Voltage Electrical Cable Loading in Substation Basement Spaces. In 58th International Universities Power Engineering Conference. IEEE. doi:10.1109/UPEC57427.2023.10294526

Ghadimi, P., Sar, K., & Azadnia, A. H. (2024). An integrated decision-making process for sustainable supplier selection and order allocation in the automotive industry. In Procedia CIRP Vol. 122 (pp. 1036-1041). doi:10.1016/j.procir.2024.01.140

Sar, K., & Ghadimi, P. (2024). Web Service-Based Capacitated Smart Vehicle Routing Problem with Time Window and Threshold Waste Level for Home Health Care Industry. In Proceedings of the 19th International Conference on Software Technologies, ICSOFT 2024 (pp. 185-191). doi:10.5220/0012640000003758

Rejeb, H. B., Muxika, E., & Ghadimi, P. (2024). Summer School on Circular Economy for Sustainable Manufacturing: A Case Study and Lessons Learned. In Procedia CIRP Vol. 122 (pp. 952-957). doi:10.1016/j.procir.2024.01.129

Gilchrist, M., Trotta, A., Ganly, S., Annaidh, A. N., & Ganly, M. (2024). 11.14 Are headguards likely to reduce the risk of head injury and mTBI in rugby?. In First Round Abstract Submissions (pp. A58.2-A58). BMJ Publishing Group Ltd and British Association of Sport and Exercise Medicine. doi:10.1136/bjsports-2023-concussion.155

Gilchrist, M., Michio Clark, J., McGoldrick, A., Clissold, J., Hill, J., Adanty, K., et al. (2024). 12.8 Proposed injury thresholds for concussion in equestrian sports. In First Round Abstract Submissions (pp. A66.3-A67). BMJ Publishing Group Ltd and British Association of Sport and Exercise Medicine. doi:10.1136/bjsports-2023-concussion.177

Hennelly, M., Kelly, A., Hargaden, V., & Nolan, K. (2024). ELIMINATING THE BARRIERS TO CREATING AND SHARING 3D INTERACTIVE MEDIA FOR ENHANCED LEARNING MATERIALS. In INTED Proceedings Vol. 1 (pp. 1935-1945). IATED. doi:10.21125/inted.2024.0550

Yasar, M., Prasad, V., Hu, Y., Murphy, N., & Ivankovic, A. (2024). Mode I Fracture Toughness Behaviour of Recyclable Piezoelectric Composites. In Procedia Structural Integrity Vol. 52 (pp. 165-175). doi:10.1016/j.prostr.2023.12.017

Kuri, J. C., Lijnse, T. M., Lee, C. B., Haider, K., & Dalton, C. (2024). Adaptable gold solid microneedle arrays for drug delivery. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE Vol. 12837. doi:10.1117/12.2691483

Rios, K., Curren, K., MacManus, D., & Davis, M. (2023). Investigating the interplay between cervical spine saggital balance and lower back pain using computational biomechanics and biomechanical imaging. In Irish Machine Vision and Image Processing. Galway Ireland.

Yasar, M., Prasad, V., Hu, Y., Murphy, N., & Ivankovic, A. (2024). Mode I Fracture Toughness Behaviour of Recyclable Piezoelectric Composites. In Procedia Structural Integrity Vol. 52 (pp. 165-175). doi:10.1016/j.prostr.2023.12.017

Hennelly, M., Kelly, A., Hargaden, V., & Nolan, K. (2024). ELIMINATING THE BARRIERS TO CREATING AND SHARING 3D INTERACTIVE MEDIA FOR ENHANCED LEARNING MATERIALS. In INTED Proceedings Vol. 1 (pp. 1935-1945). IATED. doi:10.21125/inted.2024.0550

Azadi, A., O’Cearbhaill, E. D., & Celikin, M. (2024). The Effect of Powder Size and Morphology on the Sinterability of Bioresorbable Mg-Sr/Ca Alloys. In Minerals, Metals and Materials Series (pp. 205-212). doi:10.1007/978-3-031-50240-8_39

Belikov, N. V., Sasidharan, S., & O'Rourke, M. (2024). CIRCULATORY LOOP FOR TESTING DEVICES FOR REPLACING, RESTORING, OR ASSISTING THE TRICUSPID HEART VALVE. In Bioengineering in Ireland 2024 (BINI 2024). Newcastle, Co. Down, N.Ireland.

Connolly, M., O'Rourke, M., & Ivankovic, A. (2024). Reducing Aerodynamic Drag on Flatbed Trailers for Passenger Vehicles Using Novel Appendable Devices. In Proceedings of the 2024 UK Association for Computational Mechanics Conference (pp. 34-38). Durham University. doi:10.62512/conf.ukacm2024.056

Ashkarkalaei, M., Ghiasi, R., Pakrashi, V., & Malekjafarian, A. (2024). An unsupervised damage detection method for an operating wind turbine blade. In 11th European Workshop on Structural Health Monitoring, EWSHM 2024. doi:10.58286/29810

Obrien, E. J., Ren, Y., Tran, T. T. X., Ozer, E., & Pakrashi, V. (2024). Fleet monitoring using a Bayesian approach to detect bridge bearing damage. In Bridge Maintenance, Safety, Management, Digitalization and Sustainability - Proceedings of the 12th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2024 (pp. 1672-1678). doi:10.1201/9781003483755-195

Varouxis, T., Dertimanis, V., Abdallah, I., Chatzi, E., Pakrashi, V., & Malekjafarian, A. (2024). Deep-Learning-based damage detection of an experimentally tested full-scale wind turbine blade. In 11th European Workshop on Structural Health Monitoring, EWSHM 2024. doi:10.58286/29852

Zhang, K., Hao, G., Pakrashi, V., Murphy, J., & Long, P. (2024). Design of a 6-DOF Aerial Hybrid Cable-Driven Parallel Manipulator. In MESA 2024 - 20th International Conference on Mechatronic, Embedded Systems and Applications, Proceedings. doi:10.1109/MESA61532.2024.10704885

Malaji, P. V., Litak, G., Pakrashi, V., Abdelkefi, A., Kattimani, R. S., & Karadi, L. N. (2024). Vibration Control and Energy Harvesting Using Coupled Pendulum Absorbers. In Mechanisms and Machine Science Vol. 153 (pp. 381-389). doi:10.1007/978-981-99-8986-7_25

Banerjee, S., Rounakt, A., & Pakrashi, V. (2024). Control of an Under-actuated Cartpole with an Evolving Neural Topology using Synaptic Bellman Equation. In 2024 13th International Conference on Modern Circuits and Systems Technologies, MOCAST 2024 - Proceedings. doi:10.1109/MOCAST61810.2024.10615364

Yasar, M., Prasad, V., Hu, Y., Murphy, N., & Ivankovic, A. (2024). Mode I Fracture Toughness Behaviour of Recyclable Piezoelectric Composites. In Procedia Structural Integrity Vol. 52 (pp. 165-175). doi:10.1016/j.prostr.2023.12.017

Banerjee, S., Rounakt, A., & Pakrashi, V. (2024). Control of an Under-actuated Cartpole with an Evolving Neural Topology using Synaptic Bellman Equation. In 2024 13th International Conference on Modern Circuits and Systems Technologies, MOCAST 2024 - Proceedings. doi:10.1109/MOCAST61810.2024.10615364

Shen, M., & Fang, F. (2024). Polishing of Ti6Al4V internal structures made by laser-based powder bed fusion. In The 10th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023).

Wang, X., Li, Y., Wen, C., Li, B., & Yan, Y. (2024). Heat and Mass Transfer Characteristics of the Taylor Bubble Flow in Pulsating Heat Pipe. In 7th ASME International Conference of Micro/Nanoscale Heat and Mass Transfer.

Lanbaran, D., Ebrahimi, H., Wang, X., Wen, C., & Li, B. (2024). Numerical Study of Droplet Dynamics and Breakup Under Direct and Alternating Electric Fields. In 7th ASME International Conference of Micro/Nanoscale Heat and Mass Transfer.

Ding, H., Song, X., Chai, X., Wang, X., Li, B., Yang, Y., & Wen, C. (2024). Heat Transfer of a Train of Microdroplets Impinging on the Surface and Film in Spray Cooling. In 7th ASME International Conference of Micro/Nanoscale Heat and Mass Transfer.

Ala, A., Simic, V., Pamucar, D., & Jana, C. (2023). A Novel Neutrosophic-based Multi-objective Grey Wolf Optimizer for Ensuring the Security and Resilience of Sustainable Energy: A Case Study of Belgium. Sustainable Cities and Society, 96. doi:10.1016/j.scs.2023.104709

Goli, A., Ala, A., & Mirjalili, S. (2023). A robust possibilistic programming framework for designing an organ transplant supply chain under uncertainty. Annals of Operations Research, 328(1), 493-530. doi:10.1007/s10479-022-04829-7

Ala, A., Yazdani, M., Ahmadi, M., Poorianasab, A., & Attari, M. Y. N. (2023). An efficient healthcare chain design for resolving the patient scheduling problem: queuing theory and MILP-ASA optimization approach. Annals of Operations Research, 328(1), 3-33. doi:10.1007/s10479-023-05287-5

Attari, M. Y. N., Moslemi Beirami, A. A., Ala, A., & Jami, E. N. (2023). Resolving the practical factors in the healthcare system management by considering a combine approach of AHP and ANP methods. Evaluation and Program Planning, 100. doi:10.1016/j.evalprogplan.2023.102339

Liu, Z., Chen, P., Wang, Z., Ala, A., & Pethuraj, M. S. (2024). OpHSS: Optimized pH Sensing Synergy Alignment in IoT Backbone Networks for Precision Farming. IEEE Sensors Journal. doi:10.1109/JSEN.2024.3477960

Ala, A., Deveci, M., Bani, E. A., & Sadeghi, A. H. (2024). Dynamic capacitated facility location problem in mobile renewable energy charging stations under sustainability consideration. Sustainable Computing: Informatics and Systems, 41. doi:10.1016/j.suscom.2023.100954

Ala, A., Goli, A., Mirjalili, S., & Simic, V. (2024). A fuzzy multi-objective optimization model for sustainable healthcare supply chain network design. Applied Soft Computing, 150. doi:10.1016/j.asoc.2023.111012

Saha, A., Dabic-Miletic, S., Senapati, T., Simic, V., Pamucar, D., Ala, A., & Arya, L. (2024). Fermatean Fuzzy Dombi Generalized Maclaurin Symmetric Mean Operators for Prioritizing Bulk Material Handling Technologies. Cognitive Computation. doi:10.1007/s12559-024-10323-y

Ala, A., Simic, V., Pamucar, D., & Bacanin, N. (2024). Enhancing patient information performance in internet of things-based smart healthcare system: Hybrid artificial intelligence and optimization approaches. Engineering Applications of Artificial Intelligence, 131. doi:10.1016/j.engappai.2024.107889

Attari, M. Y. N., Ala, A., Ahmadi, M., & Jami, E. N. (2024). A Highly Effective Optimization Approach for Managing Reverse Warehouse System Capacity Across Diverse Scenarios. Process Integration and Optimization for Sustainability, 8(2), 455-471. doi:10.1007/s41660-023-00388-x

Ala, A., Sadeghi, A. H., Deveci, M., & Pamucar, D. (2024). Improving smart deals system to secure human-centric consumer applications: Internet of things and Markov logic network approaches. Electronic Commerce Research, 24(2), 771-797. doi:10.1007/s10660-023-09787-1

Wang, Z., Ala, A., Liu, Z., Cui, W., Ding, H., Jin, G., & Lu, X. (2024). A Hybrid Equilibrium Optimizer Based on Moth Flame Optimization Algorithm to Solve Global Optimization Problems. Journal of Artificial Intelligence and Soft Computing Research, 14(3), 207-235. doi:10.2478/jaiscr-2024-0012

Ala, A., Simic, V., Bacanin, N., & Tirkolaee, E. B. (2024). Blood supply chain network design with lateral freight: A robust possibilistic optimization model. Engineering Applications of Artificial Intelligence, 133. doi:10.1016/j.engappai.2024.108053

Sood, D., Alhindawi, I., Ali, U., McGrath, J. A., Byrne, M. A., Finn, D., & O'Donnell, J. (2023). Simulation-based evaluation of occupancy on energy consumption of multi-scale residential building archetypes. Journal of Building Engineering, 75. doi:10.1016/j.jobe.2023.106872

Ali, U., Bano, S., Shamsi, M. H., Sood, D., Hoare, C., Zuo, W., et al. (2024). Urban building energy performance prediction and retrofit analysis using data-driven machine learning approach. Energy and Buildings, 303. doi:10.1016/j.enbuild.2023.113768

Ali, U., Bano, S., Shamsi, M. H., Sood, D., Hoare, C., Zuo, W., et al. (2024). Urban residential building stock synthetic datasets for building energy performance analysis. Data in Brief, 53. doi:10.1016/j.dib.2024.110241

Charalambides, M., Menicou, M., & Aristokleous, N. (2024). Powering aquaculture operations at sea: Can hydrogen be a sustainable solution?. Aquacultural Engineering, 105. doi:10.1016/j.aquaeng.2024.102411

Bali, S., Tukovic, Ž., Cardiff, P., Ivankovic, A., & Pakrashi, V. (2024). A finite volume adaptation of beam-to-beam contact interactions implemented for geometrically exact Simo–Reissner beams. Computational Mechanics. doi:10.1007/s00466-024-02503-2

Vadhva, P., Boyce, A. M., Patel, A., Shearing, P. R., Offer, G., & Rettie, A. J. E. (2023). Silicon-Based Solid-State Batteries: Electrochemistry and Mechanics to Guide Design and Operation. ACS Applied Materials and Interfaces, 15(36), 42470-42480. doi:10.1021/acsami.3c06615

Parks, H. C. W., Boyce, A. M., Wade, A., Heenan, T. M. M., Tan, C., Martínez-Pañeda, E., et al. (2023). Direct observations of electrochemically induced intergranular cracking in polycrystalline NMC811 particles. Journal of Materials Chemistry A, 11(39), 21322-21332. doi:10.1039/d3ta03057a

Boyce, A. M., Martínez-Pañeda, E., & Shearing, P. R. (2024). The role of chemo-mechanical modelling in the development of battery technology—a perspective. JPhys Energy, 6(2). doi:10.1088/2515-7655/ad3675

Zhu, P., Boyce, A., Daemi, S. R., Dong, B., Chen, Y., Guan, S., et al. (2024). A groovy laser processing route to achieving high power and energy lithium-ion batteries. Energy Storage Materials, 69. doi:10.1016/j.ensm.2024.103373

Arjmandabasi, T., Ugi, D., Révész, Á., Schafler, E., Browne, D. J., & Kovács, Z. (2023). In-situ compression with acoustic emission detection of high pressure torsion deformed Cu<inf>38</inf>Zr<inf>54</inf>Al<inf>8</inf> metallic glass micropillars. Journal of Alloys and Compounds, 965. doi:10.1016/j.jallcom.2023.171295

Browne, D. J., & McCartney, D. G. (2023). John David Hunt. 12 December 1936—8 December 2012. Biographical Memoirs of Fellows of the Royal Society, 75, 239-261. doi:10.1098/rsbm.2022.0046

Al Azad, A. R., Cardiff, P., & Browne, D. J. (2023). Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation. Metals, 13(12). doi:10.3390/met13121916

Reinhart, G., Browne, D. J., Kargl, F., García-Moreno, F., Becker, M., Sondermann, E., et al. (2023). In-situ X-ray monitoring of solidification and related processes of metal alloys. npj Microgravity, 9(1). doi:10.1038/s41526-023-00321-z

Zhang, Y., MacReamoinn, R., Cardiff, P., & Keenahan, J. (2023). Analyzing Wind Effects on Long-Span Bridges: A Viable Numerical Modelling Methodology Using OpenFOAM for Industrial Applications. Infrastructures, 8(9). doi:10.3390/infrastructures8090130

Oliveira, I. L., Cardiff, P., Baccin, C. E., Tatit, R. T., & Gasche, J. L. (2023). On the major role played by the lumen curvature of intracranial aneurysms walls in determining their mechanical response, local hemodynamics, and rupture likelihood. Computers in Biology and Medicine, 163. doi:10.1016/j.compbiomed.2023.107178

Batistic, I., Cardiff, P., Ivankovic, A., & Tukovic, Ž. (2023). A finite volume penalty-based implicit procedure for the treatment of the frictionless contact boundaries. International Journal for Numerical Methods in Engineering, 124(18), 4171-4191. doi:10.1002/nme.7302

Al Azad, A. R., Cardiff, P., & Browne, D. J. (2023). Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation. Metals, 13(12). doi:10.3390/met13121916

Bali, S., Tukovic, Ž., Cardiff, P., Ivankovic, A., & Pakrashi, V. (2024). A finite volume adaptation of beam-to-beam contact interactions implemented for geometrically exact Simo–Reissner beams. Computational Mechanics. doi:10.1007/s00466-024-02503-2

Flint, T. F., Robson, J. D., Esmati, P., Grilli, N., Parivendhan, G., & Cardiff, P. (2024). Version 2.0 — LaserbeamFoam: Laser ray-tracing and thermally induced state transition simulation toolkit. SoftwareX, 25, 101612. doi:10.1016/j.softx.2023.101612

Esmati, P., Flint, T., Akyel, F., Olschok, S., Reisgen, U., Cardiff, P., et al. (2024). Simulating chemical mixing and molten pool shape in dissimilar welds using thermal fluid dynamics. International Journal of Heat and Mass Transfer, 226. doi:10.1016/j.ijheatmasstransfer.2024.125449

Kim, H., McKenna, T., O’Cearbhaill, E., & Celikin, M. (2024). Optimising Mg-Ca/PLA Composite Filaments for Additive Manufacturing: An Analysis of Particle Content, Size, and Morphology. Materials, 17(12). doi:10.3390/ma17122983

Naab, B., Ramachandran, S., Mirihanage, W., & Celikin, M. (2024). Fatigue prediction through quantification of critical defects and crack growth behaviour in additively manufactured Ti-6Al-4V alloy. Materials Science and Engineering: A, 903. doi:10.1016/j.msea.2024.146658

O'Connor, H., Singh, G., Kumar, A., Paetzold, R., Celikin, M., & O'Cearbhaill, E. D. (2024). Fused filament fabrication using stainless steel 316L-polymer blend: Analysis and optimization for green density and surface roughness. Polymer Composites, 45(12), 10632-10644. doi:10.1002/pc.28496

Conroy Broderick, H., & Rudykh, S. (2024). Analysis of shear shock waves in soft materials: From periodic elastic laminates and fibre-reinforced composites to molecular chain networks. International Journal of Solids and Structures, 295. doi:10.1016/j.ijsolstr.2024.112790

Nagle, M., Conroy Broderick, H., Vedel, C., Destrade, M., Fop, M., & Ní Annaidh, A. (2024). A Gaussian process approach for rapid evaluation of skin tension. Acta Biomaterialia, 182, 54-66. doi:10.1016/j.actbio.2024.05.025

Clarke, A. J., Dickson, A., & Dowling, D. P. (2024). Fabrication and Performance of Continuous 316 Stainless Steel Fibre-Reinforced 3D-Printed PLA Composites. Polymers, 16(1). doi:10.3390/polym16010063

Power, J. J., Humphreys, O., Hartnett, M., Egan, D., & Dowling, D. P. (2024). Application of in situ process monitoring to optimise laser parameters during laser powder bed fusion printing of Ti-6Al-4V parts with overhang structures. International Journal of Advanced Manufacturing Technology, 130(5-6), 2297-2311. doi:10.1007/s00170-023-12794-z

Dowling, D., & Humphreys, O. (2024). Impact of impending sustainability legislation on manufacturing SMEs: An analysis. Engineers-Journal/Mechanical.

Bagasol, A. J. I., Parivendhan, G., Ivankovic, A., & Dowling, D. P. (2024). Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data. International Journal of Advanced Manufacturing Technology, 133(7-8), 3603-3617. doi:10.1007/s00170-024-13979-w

Lyu, P., Lai, M., Song, Y., Xue, Z., & Fang, F. (2023). Sub-nanometer finishing of polycrystalline tin by inductively coupled plasma-assisted cutting. Frontiers of Mechanical Engineering, 18(3). doi:10.1007/s11465-023-0751-5

Poster Session: Dynamic optomechanical eye model for the validation of peripheral aberration measurement (2023). Journal of vision, 23(11), 82. doi:10.1167/jov.23.11.82

Ren, J., Lai, M., & Fang, F. (2023). Surface morphology of polycrystalline cerium–lanthanum alloy in nanometric cutting. Journal of Manufacturing Processes, 101, 714-720. doi:10.1016/j.jmapro.2023.05.111

You, K., Liu, G., Yan, G., Fang, F., Wang, W., Du, L., & Ding, J. (2023). Pre-Compensation of Thermal Error for Laser-Assisted Diamond Turning. Micromachines, 14(10). doi:10.3390/mi14101843

Wu, X., Zhu, L., Fang, F., & Zhang, X. (2023). Research on the quality control technology of micro-topography machining based on in situ white light interferometry. Measurement: Journal of the International Measurement Confederation, 220. doi:10.1016/j.measurement.2023.113257

Wang, P., & Fang, F. (2023). Defect-Mediated Atomic Layer Etching Processes on Cl-Si(100): An Atomistic Insight. Journal of Physical Chemistry C, 127(43), 21106-21113. doi:10.1021/acs.jpcc.3c05378

Fang, F. (2023). On the Three Paradigms of Manufacturing Advancement. Nanomanufacturing and Metrology, 6(1). doi:10.1007/s41871-023-00217-2

O’Hara, J., & Fang, F. (2023). Magnetohydrodynamic-based Internal Cooling System for a Ceramic Cutting Tool: Concept Design, Numerical Study, and Experimental Evalidation. Nanomanufacturing and Metrology, 6(1). doi:10.1007/s41871-023-00210-9

Zhao, C., Lai, M., & Fang, F. (2023). Nanometric Cutting Mechanism of Cerium–Lanthanum Alloy. Chinese Journal of Mechanical Engineering (English Edition), 36(1). doi:10.1186/s10033-023-00927-0

Liu, G., & Fang, F. (2023). Determination accuracy enhancement of viscoelastic constitutive model of optical glass. Materials and Design, 236. doi:10.1016/j.matdes.2023.112513

You, K., Liu, G., Wang, W., & Fang, F. (2023). Laser assisted diamond turning of silicon freeform surface. Journal of Materials Processing Technology, 322. doi:10.1016/j.jmatprotec.2023.118172

Wang, X., Song, L., Wang, X., Lu, S., Li, J., Zhang, P., & Fang, F. (2023). An Ultrasensitive Fiber-End Tactile Sensor with Large Sensing Angle Based on Specklegram Analysis. IEEE Sensors Journal, 23(24), 30394-30402. doi:10.1109/JSEN.2023.3327512

Wang, J., & Fang, F. (2024). Toward efficient fabrication of microstructures on SiC with nanometric surface quality. CIRP Annals, 73(1), 157-160. doi:10.1016/j.cirp.2024.04.058

O’Hara, J., & Fang, F. Z. (2024). Design and fabrication of an aluminium oxide cutting insert with an internal cooling channel. Advances in Manufacturing. doi:10.1007/s40436-024-00483-3

Lyu, P., Fang, F., & Meyer, D. (2024). Nanometric cutting of plasma modified polycrystalline tin. CIRP Annals, 73(1), 33-36. doi:10.1016/j.cirp.2024.04.064

Guo, Z., Guo, B., Zhang, J., Wu, G., Zhao, H., Jia, J., et al. (2024). CVD diamond processing tools: A review. Journal of Advanced Research. doi:10.1016/j.jare.2024.09.013

Wang, X., Song, L., Wang, X., Lu, S., Zheng, Y., & Fang, F. (2024). All-Optical High-Resolution On-Chip Pressure Sensing Method Based on Tunable Liquid-Core/Liquid-Cladding Waveguide. IEEE Sensors Journal, 24(2), 1287-1295. doi:10.1109/JSEN.2023.3337770

Xue, Z., Lai, M., Xu, F., & Fang, F. (2024). Influence factors and prediction model of surface roughness in single-point diamond turning of polycrystalline soft metal. Journal of Materials Processing Technology, 324. doi:10.1016/j.jmatprotec.2023.118256

Geng, Z., Chen, C., Wang, P., & Fang, F. (2024). Thermal oxidation polishing of pressureless sintered silicon carbide. Ceramics International, 50(5), 7860-7867. doi:10.1016/j.ceramint.2023.12.114

Song, Y., Xu, Z., Rommel, M., Astakhov, G. V., Hlawacek, G., & Fang, F. (2024). Defects distribution and evolution in selected-area helium ion implanted 4H–SiC. Ceramics International, 50(5), 7691-7701. doi:10.1016/j.ceramint.2023.12.096

Wang, X., Yang, Y., Li, S., Wang, X., Zhang, P., Lu, S., et al. (2024). A reflective multimode fiber vector bending sensor based on specklegram. Optics and Laser Technology, 170. doi:10.1016/j.optlastec.2023.110235

Zhao, Y., Li, S., & Fang, F. (2024). Validation of widefield aberrometer for global peripheral aberration scanning. Measurement: Journal of the International Measurement Confederation, 227. doi:10.1016/j.measurement.2024.114304

Qi, H., Wang, J., & Fang, F. (2024). Study on electron response to near-infrared, ultraviolet and extreme ultraviolet femtosecond laser by first-principle. Optics and Laser Technology, 171. doi:10.1016/j.optlastec.2023.110396

An, H., Wang, J., Fang, F., & Jiang, J. (2024). Exploring ablation of GaAs at atomic and close-to-atomic scale by pulsed laser and 3D TTM–MD simulations. Optics and Laser Technology, 171. doi:10.1016/j.optlastec.2023.110427

Zhao, Y., & Fang, F. (2024). Beam splitter effect in Hartmann-Shack ocular wavefront sensing. Optics and Lasers in Engineering, 175. doi:10.1016/j.optlaseng.2023.108020

O’Hara, J., & Fang, F. (2024). Study on magnetohydrodynamic internal cooling mechanism within an aluminium oxide cutting tool. International Journal of Advanced Manufacturing Technology, 132(9-10), 4435-4460. doi:10.1007/s00170-024-13542-7

Saffari, M., Keogh, D., De Rosa, M., & Finn, D. P. (2023). Technical and economic assessment of a hybrid heat pump system as an energy retrofit measure in a residential building. Energy and Buildings, 295. doi:10.1016/j.enbuild.2023.113256

Sood, D., Alhindawi, I., Ali, U., McGrath, J. A., Byrne, M. A., Finn, D., & O'Donnell, J. (2023). Simulation-based evaluation of occupancy on energy consumption of multi-scale residential building archetypes. Journal of Building Engineering, 75. doi:10.1016/j.jobe.2023.106872

Bampoulas, A., Pallonetto, F., Mangina, E., & Finn, D. P. (2023). A Bayesian deep-learning framework for assessing the energy flexibility of residential buildings with multicomponent energy systems. Applied Energy, 348. doi:10.1016/j.apenergy.2023.121576

Le Dréau, J., Lopes, R. A., O'Connell, S., Finn, D., Hu, M., Queiroz, H., et al. (2023). Developing energy flexibility in clusters of buildings: A critical analysis of barriers from planning to operation. Energy and Buildings, 300. doi:10.1016/j.enbuild.2023.113608

de Andrade Pereira, F., Paul, L., Pritoni, M., Casillas, A., Prakash, A., Huang, W., et al. (2024). Enabling portable demand flexibility control applications in virtual and real buildings. Journal of Building Engineering, 86. doi:10.1016/j.jobe.2024.108645

Nasrabadi, M., & Finn, D. (2024). Performance Assessment of an Integrated Low-Approach Low-Temperature Open Cooling Tower with Radiant Cooling and Displacement Ventilation for Space Conditioning in Temperate Climates. Energies, 17(15). doi:10.3390/en17153763

O’Donoghue, J. C., & Freeman, F. E. (2024). Make it STING: nanotechnological approaches for activating cGAS/STING as an immunomodulatory node in osteosarcoma. Frontiers in Immunology, 15. doi:10.3389/fimmu.2024.1403538

Verbruggen, S. W., Freeman, C. L., & Freeman, F. E. (2024). Utilizing 3D Models to Unravel the Dynamics of Myeloma Plasma Cells’ Escape from the Bone Marrow Microenvironment. Cancers, 16(5). doi:10.3390/cancers16050889

Wang, C., Zhang, X., Hu, X., Sun, B., Zhao, L., Lim, M. K., et al. (2024). Evolution of structural characteristics and its determinants of global human hair waste trade network based on temporal exponential random graph model. Resources, Conservation and Recycling, 200. doi:10.1016/j.resconrec.2023.107305

Yue, X., Mu, D., Wang, C., Ren, H., Du, J., & Ghadimi, P. (2024). Disruption risks to Chinese overseas flat panel display supply networks under China’s zero-COVID policy. Operations Management Research, 17(2), 406-437. doi:10.1007/s12063-023-00399-4

Mousavizadeh, S. M., He, Z., Wang, X., Shen, P., Wang, W., Gilchrist, M. D., & Zhang, N. (2023). Surface modification of WE43 magnesium alloy via alkali/stearic acid treatment for biodegradable drug-eluting stent applications. Materials Chemistry and Physics, 308. doi:10.1016/j.matchemphys.2023.128249

Ferdousi, J., Post, A., Karton, C., Doelle, K., Gilchrist, M. D., & Hoshizaki, T. B. (2023). Head trauma analysis of laboratory reconstructed headers using 1966 Slazenger Challenge and 2018 Telstar 18 soccer balls. Scientific Reports, 13(1). doi:10.1038/s41598-023-45489-2

Wang, X., Liu, J., Dong, R., Gilchrist, M. D., & Zhang, N. (2024). High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach. Virtual and Physical Prototyping, 19(1). doi:10.1080/17452759.2024.2318774

Khatib, A., Post, A., Hoshizaki, T., & Gilchrist, M. D. (2024). Brain trauma characteristics for lightweight and heavyweight fighters in professional mixed martial arts. Sports Biomechanics, 23(8), 1083-1105. doi:10.1080/14763141.2021.1922740

Alanezi, S. T., Almutairi, W. M., Cronin, M., Gobbo, O., O'Mara, S. M., Sheppard, D., et al. (2024). Whole-brain traumatic controlled cortical impact to the left frontal lobe: Magnetic resonance image-based texture analysis. Journal of Neuropathology and Experimental Neurology, 83(2), 94-106. doi:10.1093/jnen/nlad110

Zaki, S., Guan, T., Zhang, N., & Gilchrist, M. D. (2024). Precision shaping of nickel micro-mould features via electropolishing: Characterisation of electrolytes from strong to weak acids. Journal of Manufacturing Processes, 113, 261-274. doi:10.1016/j.jmapro.2024.01.051

Zaki, S., Zhang, N., & Gilchrist, M. D. (2024). Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects. International Journal of Advanced Manufacturing Technology, 131(7-8), 3631-3649. doi:10.1007/s00170-024-13163-0

Barnes-Wood, M., McCloskey, H., Connelly, S., Gilchrist, M. D., Annaidh, A. N., & Theobald, P. S. (2024). Investigation of Head Kinematics and Brain Strain Response During Soccer Heading Using a Custom-Fit Instrumented Mouthguard. Annals of Biomedical Engineering, 52(4), 934-945. doi:10.1007/s10439-023-03430-8

Su, Q., Zhang, N., & Gilchrist, M. D. (2024). Precision injection moulding of micro components: Determination of heat transfer coefficient and precision process simulation. International Journal of Mechanical Sciences, 269. doi:10.1016/j.ijmecsci.2024.109065

Murphy, A., Post, A., Gilchrist, M. D., Clark, J. M., & Hoshizaki, B. (2024). Comparing equestrian helmets with and without rotational technology using an equestrian concussive-specific helmet test protocol. Sports Engineering, 27(1). doi:10.1007/s12283-023-00445-1

Zaki, S., Zhang, N., & Gilchrist, M. D. (2024). Microscale shaping and rounding of ridge arrays and star pattern features on nickel mould via electrochemical polishing. Advances in Manufacturing, 12(2), 207-226. doi:10.1007/s40436-023-00474-w

Wang, X., Liu, J., Liu, Y., Zhao, Y., Li, Y., Gilchrist, M. D., & Zhang, N. (2024). High-precision and Large-Scale Vat Photopolymerization Printing based on “Spatial-Pixel Integration Compensation” method. Additive Manufacturing, 92. doi:10.1016/j.addma.2024.104351

Wang, X., Liu, J., Kho, A. S. K., Hong, W., Gilchrist, M. D., & Zhang, N. (2024). Elucidating the mechanism of overcuring in microchannels fabricated via vat photopolymerization (VPP) for precise microfluidic chip printing. Additive Manufacturing, 92. doi:10.1016/j.addma.2024.104350

Mousavizadeh, S. M., Yu, M., Gilchrist, M. D., & Zhang, N. (2024). Preparation of a polycaprolactone coating on WE43 for biodegradable stent applications using dual solvents, ultrasonic atomization spray, and anodization. Progress in Organic Coatings, 193. doi:10.1016/j.porgcoat.2024.108528

Ferlini, A., Gross, E. S., Garnier, N., & Screen4Care consortium. (2023). Rare diseases' genetic newborn screening as the gateway to future genomic medicine: the Screen4Care EU-IMI project.. Orphanet journal of rare diseases, 18(1), 310. doi:10.1186/s13023-023-02916-x

Garnier, N., Berghout, J., Zygmunt, A., Singh, D., Huang, K. A., Kantz, W., et al. (2023). Genetic newborn screening and digital technologies: A project protocol based on a dual approach to shorten the rare diseases diagnostic path in Europe. PLoS ONE, 18(11 November). doi:10.1371/journal.pone.0293503

Langan, L., Frazer, K., Darley, A., Goodman, L., Browne, F., Fulfilled, P., et al. (2024). Inclusive pedagogy in online simulation-based learning in undergraduate nursing education: A scoping review. Journal of Advanced Nursing. doi:10.1111/jan.16284

Connolly, M. G., O’Rourke, M. J., & Ivankovic, A. (2023). A Drag Reduction Study on the Aerodynamics of the Irish Taxi Sign. Fluids, 8(9). doi:10.3390/fluids8090238

Rizzo, G., Saitta, L., Dattilo, S., Tosto, C., Pergolizzi, E., Ivankovic, A., & Cicala, G. (2023). Thermomechanical Characterization of an Unsaturated Polyester Vitrimer Synthesized Using a Titanium Transesterification Catalyst. ACS Applied Polymer Materials, 5(10), 8326-8338. doi:10.1021/acsapm.3c01489

Connolly, M. G., O’Rourke, M. J., & Ivankovic, A. (2023). Reducing Aerodynamic Drag on Flatbed Trailers for Passenger Vehicles Using Novel Appendable Devices. Fluids, 8(11). doi:10.3390/fluids8110289

Scarselli, G., Prasad, V., Quan, D., Maffezzoli, A., Murphy, N., & Ivankovic, A. (2024). Interlaminar fracture properties of UV and plasma-treated glass fiber epoxy composites. Polymer Composites. doi:10.1002/pc.29079

Weng, P., Prasad, V., Rao, P. S., O'Dowd, N., Murphy, N., Ivankovic, A., & Scarselli, G. (2024). Interfacial properties of carbon fiber-reinforced biobased resin composites by single fiber fragmentation, fiber push-out, and interlaminar shear strength. Polymer Composites, 45(4), 3355-3369. doi:10.1002/pc.27995

Connolly, M. G., O’Rourke, M. J., & Ivankovic, A. (2024). Reducing Aerodynamic Drag on Roof-Mounted Lightbars for Emergency Vehicles. Fluids, 9(5). doi:10.3390/fluids9050113

Rizzo, G., Dattilo, S., Prasad, V., Yasar, M., Ivankovic, A., Latteri, A., & Cicala, G. (2024). Enhancing Sustainability in Unsaturated Polyester Resin: A Way to Use Biobased Curing Agents for Reduced Styrene Content and Improved Recyclability Properties. ACS Applied Polymer Materials, 6(10), 5714-5725. doi:10.1021/acsapm.4c00388

Yasar, M., Hassett, P., Murphy, N., & Ivankovic, A. (2024). ß Phase Optimization of Solvent Cast PVDF as a Function of the Processing Method and Additive Content. ACS Omega, 9(24), 26020-26029. doi:10.1021/acsomega.4c01221

Connolly, M. G., Ivankovic, A., & O'Rourke, M. J. (2024). Drag reduction technology and devices for road vehicles - A comprehensive review. Heliyon, 10(13). doi:10.1016/j.heliyon.2024.e33757

Bagasol, A. J. I., Parivendhan, G., Ivankovic, A., & Dowling, D. P. (2024). Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data. International Journal of Advanced Manufacturing Technology, 133(7-8), 3603-3617. doi:10.1007/s00170-024-13979-w

Rizzo, G., Prasad, V., Yasar, M., Cicala, G., Ivankovic, A., Murphy, N., & Latteri, A. (2024). Investigation of mechanical properties and self-healing efficiency of carbon fibers composites infused with unsaturated polyester vitrimer. Polymer Composites, 45(11), 10404-10417. doi:10.1002/pc.28483

Kho, A. S. K., Béguin, S., O'Cearbhaill, E. D., & Ní Annaidh, A. (2023). Mechanical characterisation of commercial artificial skin models. Journal of the Mechanical Behavior of Biomedical Materials, 147. doi:10.1016/j.jmbbm.2023.106090

Kho, A. S. K., Ooi, E. H., Foo, J. J., & Ooi, E. T. (2024). Saline-Infused Radiofrequency Ablation: A Review on the Key Factors for a Safe and Reliable Tumour Treatment. IEEE Reviews in Biomedical Engineering, 17, 310-321. doi:10.1109/RBME.2022.3179742

Wang, X., Liu, J., Dong, R., Gilchrist, M. D., & Zhang, N. (2024). High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach. Virtual and Physical Prototyping, 19(1). doi:10.1080/17452759.2024.2318774

Wang, X., Liu, J., Liu, Y., Zhao, Y., Li, Y., Gilchrist, M. D., & Zhang, N. (2024). High-precision and Large-Scale Vat Photopolymerization Printing based on “Spatial-Pixel Integration Compensation” method. Additive Manufacturing, 92. doi:10.1016/j.addma.2024.104351

Wang, X., Liu, J., Kho, A. S. K., Hong, W., Gilchrist, M. D., & Zhang, N. (2024). Elucidating the mechanism of overcuring in microchannels fabricated via vat photopolymerization (VPP) for precise microfluidic chip printing. Additive Manufacturing, 92. doi:10.1016/j.addma.2024.104350

Mondal, S., MacManus, D. B., Banche-Niclot, F., Vitale-Brovarone, C., Fiorilli, S., McCarthy, H. O., & Dunne, N. (2024). Finite element analysis of vertebroplasty in the osteoporotic T11-L1 vertebral body: Effects of bone cement formulation. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 112(1). doi:10.1002/jbm.b.35359

Mondal, S., MacManus, D. B., Ghosh, R., Banagunde, A., & Dunne, N. (2024). A numerical investigation of stress, strain, and bone density changes due to bone remodelling in the talus bone following total ankle arthroplasty. Journal of Medical Engineering and Technology, 48(1), 1-11. doi:10.1080/03091902.2024.2355319

Dunwoody, R., Murphy, D., Uliyanov, A., Mangan, J., Doyle, M., Thompson, J., et al. (2024). Ground-Based Characterisation of a Compact Instrument for Gamma-ray Burst Detection on a CubeSat Platform. Aerospace, 11(7). doi:10.3390/aerospace11070578

Mousavizadeh, S. M., He, Z., Wang, X., Shen, P., Wang, W., Gilchrist, M. D., & Zhang, N. (2023). Surface modification of WE43 magnesium alloy via alkali/stearic acid treatment for biodegradable drug-eluting stent applications. Materials Chemistry and Physics, 308. doi:10.1016/j.matchemphys.2023.128249

Scarselli, G., Prasad, V., Quan, D., Maffezzoli, A., Murphy, N., & Ivankovic, A. (2024). Interlaminar fracture properties of UV and plasma-treated glass fiber epoxy composites. Polymer Composites. doi:10.1002/pc.29079

Michel, S., Murphy, N., Kinloch, A. J., & Jones, R. (2024). On Cyclic-Fatigue Crack Growth in Carbon-Fibre-Reinforced Epoxy–Polymer Composites. Polymers, 16(3). doi:10.3390/polym16030435

Tredenick, E. C., Boyce, A. M., Wheeler, S., Li, J., Sun, Y., Drummond, R., et al. (2023). Bridging the Gap Between Microstructurally Resolved
Computed Tomography-Based and Homogenised
Doyle-Fuller-Newman Models for Lithium-Ion Batteries. doi:10.21203/rs.3.rs-3639668/v1

Power, J. J., Humphreys, O., Hartnett, M., Egan, D., & Dowling, D. P. (2023). Application of in-situ process monitoring to optimize laser parameters during laser powder bed fusion printing of Ti-6Al-4V parts with overhang structures. doi:10.21203/rs.3.rs-3351873/v1

Keogh, C., O'Sullivan, P., Albanis, V., Frizzell, R., Durkin, P., Roupas, C., & Rainbird, J. (2023). The Inlecom Patent Framework (IPF) Method: A Novel Approach to Patenting in EU-Funded Research Projects. doi:10.31219/osf.io/dj267

Rounak, A., Banerjee, S., Joseph, G. V., Okosun, F., Guerin, S., & Pakrashi, V. (2024). Detection of Pipeline Leaks using BiopiezoelectricEnergy Harvesting Sensors via RecurrenceQuantification and Neuromorphic Computing. doi:10.21203/rs.3.rs-3976308/v1

Shoukat, G., Malekjafarian, A., & Pakrashi, V. (2024). A Comparative Study for Using Deep LSTMs and ARIMA for Imputing Missing Data for Wind Data in the Irish Sea. doi:10.20944/preprints202405.1179.v1

Rounak, A., Banerjee, S., Joseph, G. V., Okosun, F., Guerin, S., & Pakrashi, V. (2024). Detection of Pipeline Leaks using BiopiezoelectricEnergy Harvesting Sensors via RecurrenceQuantification and Neuromorphic Computing. doi:10.21203/rs.3.rs-3976308/v1

Zhang, J. (2023). Depth error correction for plenoptic cameras based on an innovative AR system combining geometrical waveguide and micro-lens array. Xi’an, China.

Zhang, J. (2023). Invited Seminar: Development and applications of micro/nano manufacturing and ACSM. Nanjing University of Aeronautics and Astronautics, Nanjing, China.

Zhang, J. (2023). Study and Research at University College Dublin. CDIC, Changan University, China.

Zhang, J. (2023). Development and application of micro/nano manufacturing and ACSM. Chongqing, China.

Zhang, J. (2024). Invited Seminar: Applications of ultra-precision machining I - manufacturing fundamentals. Invited Seminar by Chongqing University of Technology.

Zhang, J. (2024). Invited Seminar: Applications of ultra-precision machining II - freeform optics. Chongqing University of Technology.

Zhang, J. (2024). Workshop: Micro and nano manufacturing towards ACSM. Chongqing, China.

Zhang, J. (2024). Micro and nano manufacturing to atomic scale manufacturing – applications and perspectives for bio-medical innovations. RDS Simmonscourt, Dublin.

Zhang, J. (2024). Invited Seminar: Applications of ultra-precision machining III - innovative medical devices. Chongqing University of Technology.

Cuffe, P., Healy, J., Doheny, E., Nolan, K., Hickey, A., & Mellon-Whelan, C. (2023). Academic Dishonesty Faciltated by AI Chatbots: Gauging The Exposure of Modules Within UCD College of Engineering & Architecture. Dublin, Ireland: UCD.